Installation :: (Clean Install) Is Actually Windows Deployment Service
Apr 14, 2016
I have an issue where someone has gained server access / control over my system. I am unable to regain control or even clean install my operating system from OEM windows 10 CD. Currently, when i attempt to re-install what I end up with is a Windows Deployment Service installation. Is there a way to force the installation from CD?
I recently had to restore my PC to a Windows 7 System Image from 2012.
That worked OK, but Windows Update kept failing to install the hundreds of updates needed to bring it up to date.
So I upgraded to Windows 10 instead.
That worked fine and is what I am now using.
I thought I should create and run the Clean Install media in case I need it in the future. I created a DVD as I didn't have a 4GB USB to hand. Was able to boot from the DVD and started the Clean Install process but, after selecting the hard disk partition to use, I got the Windows Setup message 'could not reinitialize the deployment engine'.
What this means and can only find some old references (Vista vintage) on the web. Should I have clicked on 'Format' for the partition?
Since I had trouble with the upgrade with Windows 10 running very slow i'd like to try a clean install, but i'm weary because I am afraid it will wipe my 8.1 main partition and not roll back. I'm using this as a guide, but need to make sure i'm doing this properly. How to install Windows 10 - clean install, dual boot or VM | Expert Reviews
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
If I create a DVD with Windows 10 Home and try to perform a clean install on a computer that came with Windows 8/8.1 Home pre-installed. Will Windows 10 Home recognize and accept my genuine Windows 8/ 8.1 Home Key stored in UEFI or firmware etc?
By Clean install I mean not updating but directly trying to install on a computer, on which Windows 10 have never been installed before.
I was wondering if I do a clean install when I get the free upgrade from windows 8.1 to windows 10 if my device drivers (for my cpu, usb ports, wifi, etc) will stay.
My laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
I'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
All the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
I upgraded to windows 10 but now I want to roll back to windows 8.1. In the future if I want to perform a clean install in my laptop will my windows 10 still be activated?
When I got my computer in 2012, I used Windows' own mover to move all files and settings over. I didn't know that that was a bad idea, and so ended up with a corrupted profile and some bad settings.
I am finally ready to do something about it.
Here's my setup:
* Windows 10 (which I am loving, by the way) * Two drives, C and D. C is my boot drive.
I want to format a new SSD drive with a clean Windows 10 install and then replace my existing C drive with that new drive. I know this means I will have to reinstall everything that is on my existing C drive, but I'm fine with that.
Here are my questions:
1. How can I format my new SSD drive with Windows 10 and get it set up as my new C drive? I have a USB connector for the new SSD drive so I can access it from a USB port first; can I use that connection to install Windows on the drive? The new SSD came with software to clone my existing C drive, but of course that is not what I want; I want a clean install to get away from the corrupted install. Can Windows recognize and format a drive connected through a USB port?
2. When I put my new drive C into my computer, how do I tell my computer that I want that to be my boot drive?
3. Once I get the new SSD installed as my new drive C, how do I format my old drive C as a drive E with Windows 10? Again, I am fine with wiping out everything on that drive once I have a new C.
4. I have a lot of programs installed on my D drive and want to keep them there. Will I need to reinstall them? (Again, if so, I'm fine with that.) Or would symlinks work?
So I did a clean install of windows 10 because my computer was running slow, but now I would like to downgrade back to windows and I don't have the "windows.old" because of the clean install.
Second PC with Win 7 Pro 32 bit was a struggle...but succeeded in Brinks clean install and activation of 10...but was a real struggle.
Now...how can I transfer the new 10 install on an HDD to a new Sata SSD in the same box ? So far haven't figured out how to make the SSD with an installed image of the new 10 install from HDD to boot from the Sata at PC startup ?
What am I doing wrong...and how do I get the SSD image of my new 10 clean install to boot from the SSD ?
I think it has to do with partitions and active Windows partition but don't remember what/how to change the boot disk to the new SSD....
I upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
I did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
I got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
My Wife is a Windows 10 Insider, and would like to clean install the latest Insider build on a new HDD, replacing her current Insider installation. What would be the easiest or best way for her to do so?.
I got a HP Notebook yesterday that had Windows 8.1 on it. Today I decided I wanted to reinstall Windows 10 (not upgrade, but clean install) on it and I do have experience in reinstalling operating systems. I reinstalled Windows 10 from a USB stick and when the computer restarted after the installation was done, it would keep booting from the USB stick. I exited the installation screen and then went to the BIOS to change boot priority to "OS Manager", but all I got was an error which I don't remember what it said, and then it just restarted again.
So my question is, how can I get Windows 10 to boot after is has installed and restarted?This is my laptop: HP 15.6 Laptop - Black (Intel Celeron N3050 / 500GB HDD / 4GB RAM / Windows 8.1) : Laptops - Best Buy Canada
I successfully upgraded from Win 8.1 to Win 10 (both Pro 64-bit) in PC's old HDD. Now I want do a clean install on a brand new SSD. I have a few questions before I buy the SSD.
1. First off, is it possible to do a clean install of Win 10 in the new SSD especially after I upgraded from Win 8.1 to Win 10 in the old HDD?
2. If 1 is possible, then at any point do I need to enter the Win 10 license key? I have used a Win 10 license key viewing tool to find out what it is.
3. Should I use the Win 10 Media Creation tool to create the ISO or just download an untouched Win 10 Pro 64 bit ISO, burn it to a DVD and do a straightforward install?
4. What happens to the Win 10 in the old HDD? Does it get deactivated on its own?
My computer has been upgraded to Windows 10 and activated. I have a non-bootable DVD Windows 10 ISO. Is it possible to do a clean install with that non-bootable DVD disk? Any alternative to do a clean install?
Heard imgburn can create a bootable DVD ISO, but after downloading the software then found it is infected, and decided not to install it.
A year ago I bought a Lenovo Yoga 2 that came with Windows 8.
Unfortunately, I upgraded to Windows 10 several months ago. It has been such a nightmare I want Windows 8 back.
Can I just buy a new copy of Windows 8.1 and clean install it on my laptop? Someone told me once its been upgraded to Windows 10 that I can't do that, but that just doesn't seem right.
I'm not very savvy when it comes to doing a reinstall. I'm not sure what to buy and I want to make sure trying this won't brick my computer. OEM, Full, etc seems like there is so many things to consider when trying to buy just a regular old version of Windows 8.1 ...
I've upgraded from windows 8.1 with uefi bios, so basically now i can do clean install 10 without product key? But the real question is: My pc have 8 partitions, the primary one, 5 of recovery, 1 oem and 1 efi. Can i delete all partitions and create only one?