Installation :: Clean Install On HP Pavillion - Error 0x80070003
Oct 1, 2015
I am trying to do a clean install of windows 10 on a new SSD on an HP Pavillion purchased in 2009 or 2010. I am booting from a DVD. All is going well in the beginning of the install. I get past the product key verification and partition section. Once it starts copying the windows file during the install it has been giving me the following error message and stopping the install:
"Windows cannot install required files. The file does not exist. Make sure all files required for installation are available and restart the installation. Error code: 0x80070003."
It has made it to different percentages of copying files before it gives me the error. Once I believe it made it almost to 100% and then gave me the error.
I have since re-downloaded the ISO twice onto different discs with no success. Have called microsoft support with no success. Tried booting from USB but the computer does not seem to support it. Tried updating bios but no newer versions were available.
View 4 Replies
Similar Messages:
Oct 15, 2015
I'm booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
here are my specs
CPU: i7 6700K
MOBO: ASROCK Z170 K6
RAM: 2x8 DDR4
GPU: RADEON R290x
all that's plugged in is the ssd, monitor, ram, and keyboard/mouse
View 1 Replies
Sep 23, 2015
Inserted my new SSD to a SATA3 port and, next to my HDD 1TB, and went for a clean install right away. The system installed without problems (wiht the old HDD still attached), then i booted up the system (was a bit weird, because two versions were showing, however i formatted the old windows partition) and installed my programs. I saw that a 110 MB of data were still sitting on my old partition where the Windows 10 was earlier. Tried to delete those files but could not. However I shut down my pc and wanted to boot up again. Then it showed me a screen with "select proper boot device or restart computer". I went to BIOS to see if my SSD was set to primary boot device, but it was. But when i manaully select the boot device, my SSD, after starting up the computer, it boots into Windows and is running normally.
Can it be that there is no boot partition on my SSD and it wants to use the boot files from the HDD?? I also tried to unplug the HDD and boot up, but the same massage was showing up. But when i select the boot device manually it works.
View 3 Replies
May 30, 2015
Win 7 user here, wanting to dual boot with Windows 10 preview (on a different partition).
So I made a Win 10 usb boot disc, and it installed it fine. Played around with the new Windows for a few mins, whilst it downloaded an update, and after installing the update, it said it needs to restart, naturally. So I did.
However, since then, the PC keeps restarting, showing a Windows 10 logo, and below that is the text, "preparing automatic repair". Then it just resets, and goes in this endless loop.
Why is this happening, and how do I resolve it?
View 9 Replies
Aug 21, 2015
I have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
View 10 Replies
Oct 21, 2015
Had an update that will not install for the Windows & Clocks app, then got an error 0x80070003 .....
View 1 Replies
Feb 1, 2016
Right now some of the 'default' application's that come loaded with windows 10 are working..but for some reason some of them are not. The one I'm most concerned about is Mail & Calendar, right now when I go into the windows store..it shows I have update's available, it adds them to the download queue properly..but upon trying to download / install them I get a message that says ' Try that again-see details, Something went wrong, The error code is 0x80070003 in case you need it.
I've tried several thing's to try and correct this..so far no luck, I know there must be a way to correct this. I was previously running Windows 10 Insider Preview Build 14251 , but I had some issue's with it..so I had to go back to Windows 10 Insider Preview Build 11102.Now when I try and update some of my application's, this is what I'm seeing.
View 2 Replies
Sep 2, 2015
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
View 1 Replies
Aug 15, 2015
I worked with my friend install windows 10 on his desktop pc. but after installation, it wont boot, rather showing bsod error 0xc000021a, we have tried reinstalling for a couple of times, but the error persisted. BTW, the previous os was windows 7. We deleted the previous OS's partition and installed it there, but it seems like nothing happened.
View 1 Replies
Oct 15, 2015
I am booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
Here are my specs
CPU: i7 6700K
MOBO: ASROCK Z170 K6
RAM: 2x8 DDR4
GPU: RADEON R290x
All that's plugged in is the ssd, monitor, ram, and keyboard/mouse ...
View 1 Replies
Dec 24, 2015
How Can i Resolve It?? Bluetooth Constantly gives error 43 after Win10 upgrade & Clean Install....
View 1 Replies
Jul 29, 2015
I did a clean install of Windows 10 Pro x64 using the method that everyone knows about by now that was written up on various sites today i.e.:
Ran the Media Creation Tool and upgraded my copy of Window 8.1 Professional with Windows 10 Professional. Looked in Control Panel --> System and it said my copy of Windows was activated. Then I ran the Media Creation Tool again and downloaded the ISO. Burned ISO to DVD. Restarted computer, booted into Windows installer on DVD, customized the install by formatting drive, did a fresh install of Windows 10.
Now when I go into Control Panel --> System it says "Windows not activated". When I click on the Activate Windows icon and click the error details link I get the error code: 0xC004C003.
I should note that the Windows 8 OS came pre-installed on my laptop which I bought brand new. I don't think that matters?
View 24 Replies
Dec 25, 2015
My laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
View 2 Replies
Dec 4, 2015
I'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
View 6 Replies
Jul 14, 2015
All the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
View 6 Replies
Aug 21, 2015
So I did a clean install of windows 10 because my computer was running slow, but now I would like to downgrade back to windows and I don't have the "windows.old" because of the clean install.
Any way to downgrade to my old windows 7.
View 9 Replies
Aug 19, 2015
I originally followed the path to upgrade my 8.1 Pro to Windows 10. Everything went fine and I created the USB during the process. Activation was OK.
Then after a few days and some unusual problems I reloaded my last Image of 8.1 Pro.
Question is Can I go back and just do a clean install since I have already did the upgrade process?
View 3 Replies
Dec 20, 2015
Second PC with Win 7 Pro 32 bit was a struggle...but succeeded in Brinks clean install and activation of 10...but was a real struggle.
Now...how can I transfer the new 10 install on an HDD to a new Sata SSD in the same box ? So far haven't figured out how to make the SSD with an installed image of the new 10 install from HDD to boot from the Sata at PC startup ?
What am I doing wrong...and how do I get the SSD image of my new 10 clean install to boot from the SSD ?
I think it has to do with partitions and active Windows partition but don't remember what/how to change the boot disk to the new SSD....
View 3 Replies
Jan 30, 2016
I upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
View 9 Replies
Dec 12, 2015
I did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
View 6 Replies
Jul 29, 2015
I got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
View 9 Replies
Dec 12, 2015
I'm finally thinking to upgrade from W7 to W10.
Here's the situation at the moment:
1) 256GB System SSD
2) 1TB data HDD
3) 3TB Raid 1 HDD for backup
I want to mount a new 500GB SSD as primary system drive, so I was thinking to use this occasion to put W10 into my machine.
So my question is: Can I update to W10 as it is and then do a clean install changing the primary system drive while keeping the license?
View 1 Replies
Feb 2, 2016
My Wife is a Windows 10 Insider, and would like to clean install the latest Insider build on a new HDD, replacing her current Insider installation. What would be the easiest or best way for her to do so?.
View 2 Replies
Aug 2, 2015
I got a HP Notebook yesterday that had Windows 8.1 on it. Today I decided I wanted to reinstall Windows 10 (not upgrade, but clean install) on it and I do have experience in reinstalling operating systems. I reinstalled Windows 10 from a USB stick and when the computer restarted after the installation was done, it would keep booting from the USB stick. I exited the installation screen and then went to the BIOS to change boot priority to "OS Manager", but all I got was an error which I don't remember what it said, and then it just restarted again.
So my question is, how can I get Windows 10 to boot after is has installed and restarted?This is my laptop: HP 15.6 Laptop - Black (Intel Celeron N3050 / 500GB HDD / 4GB RAM / Windows 8.1) : Laptops - Best Buy Canada
View 7 Replies
Aug 1, 2015
I successfully upgraded from Win 8.1 to Win 10 (both Pro 64-bit) in PC's old HDD. Now I want do a clean install on a brand new SSD. I have a few questions before I buy the SSD.
1. First off, is it possible to do a clean install of Win 10 in the new SSD especially after I upgraded from Win 8.1 to Win 10 in the old HDD?
2. If 1 is possible, then at any point do I need to enter the Win 10 license key? I have used a Win 10 license key viewing tool to find out what it is.
3. Should I use the Win 10 Media Creation tool to create the ISO or just download an untouched Win 10 Pro 64 bit ISO, burn it to a DVD and do a straightforward install?
4. What happens to the Win 10 in the old HDD? Does it get deactivated on its own?
View 9 Replies
Aug 7, 2015
My computer has been upgraded to Windows 10 and activated. I have a non-bootable DVD Windows 10 ISO. Is it possible to do a clean install with that non-bootable DVD disk? Any alternative to do a clean install?
Heard imgburn can create a bootable DVD ISO, but after downloading the software then found it is infected, and decided not to install it.
View 9 Replies
