Installation :: Clean Install And Keep Windows 8.1 Partition
May 12, 2015
Since I had trouble with the upgrade with Windows 10 running very slow i'd like to try a clean install, but i'm weary because I am afraid it will wipe my 8.1 main partition and not roll back. I'm using this as a guide, but need to make sure i'm doing this properly. How to install Windows 10 - clean install, dual boot or VM | Expert Reviews
View 5 Replies
Similar Messages:
Dec 12, 2015
I did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
View 6 Replies
Dec 6, 2015
I am building a new computer next weekend and have three drives and need partitioning strategy for 3 drives:
- Drive 1: New 256GB SSD m.2 pci-e SSD for Win10 and apps (autocad, sketchup, Adobe CC, rendering apps)
- Drive 2: Old 2010 Vertex SSD which is 90-120gb (can't recall) for scratch disk/win page file for Adobe and apps
- Drive 3: New HGST 7200rpm 4TB 3.5" HDD for files, pics, video and possible system image ( necessary on Win10?)
1) I plan to format all 3 drives as NTFS unless there is strong suggestion to do otherwise?
2) what is best partition strategy for Drive 1? How much GBs for partitions for Win vs Apps? Is 60GB adequate for win10 partition leaving just under 200 GB for apps?
3) I read on win website to create 3 partitions for sys in this order: utilities; sys; win recovery. Does default win setup do this automatically or must I specify how many partitions and in what order and in what size? I'm clueless on this.
4) Disk 2: how much risk am I taking by using 5 yr old SSD for scratch disk? The virtual memory is volatile anyway so am I just risking each current session? I plan to point page file, cache, scratch to this drive. If too risky, I presume that using boot SSD as scratch is better than using HDD #3?
5) Disk 3: does win10 still require that user do image of opsys for recovery (using acronis et al) and, if so, how many GBs do I partition on Disk 3 and if so does it matter if it is the first or last partition on this drive 3?
6) what win 10 should I get? At Fry's they have OEM and also USB flash drive?
View 9 Replies
Aug 20, 2015
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition remain or, as I thought I read, Windows will format the entire disk?
View 1 Replies
Jul 30, 2015
I originally made a USB key which booted fine, but could not install on any partition on two different PCs and 4 different drives. It gave the error message "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files." Tried different hard drives/partitions even a completely blank drive.
Did the usual wipe all partitions (on the two drives that are blank). I re-ran the MediaCreationToolx64 to make an ISO and now it is installing correctly. Is there a US English location I can download somebody's image of their USB drive or just try the 2 hour download again?
AND is their an explantion other than something went wrong creating the USBKEY? It is a brand new key (it is 3.0 but the ports are 2.0).
View 3 Replies
Sep 30, 2015
I read that a clean install rebuilds partitions and makes a recovery partition.
My question is does it allow you to pick the size of the partition that Windows 10 is installed to ?
I have a 1 terabyte drive but like to install in a 100gig partition.
I think I will delete the existing partitions before I start
View 2 Replies
Sep 2, 2015
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
View 1 Replies
Aug 12, 2015
I've already upgraded to Windows 10 on my desktop PC, and there were no issues with the upgrade. However, I work from home and my work has informed me that they won't accept Windows 10, they will only accept 7 or 8.1 as their operating system (they also only accept Internet Explorer for browsing, etc.). So I can either downgrade, which I really don't want to do, buy a second PC, which I can't afford to do, or (I'm hoping) create a new partition and run Windows 7 from that.
So my question is, is it possible to create a new partition for Windows 7 while running Windows 10 on my main partition? Will I have to downgrade and install Windows 10 later? Or can I do it from Windows 10 already?
View 2 Replies
Apr 14, 2016
I have an issue where someone has gained server access / control over my system. I am unable to regain control or even clean install my operating system from OEM windows 10 CD. Currently, when i attempt to re-install what I end up with is a Windows Deployment Service installation. Is there a way to force the installation from CD?
View 6 Replies
Sep 3, 2015
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
View 2 Replies
Aug 4, 2015
If I create a DVD with Windows 10 Home and try to perform a clean install on a computer that came with Windows 8/8.1 Home pre-installed. Will Windows 10 Home recognize and accept my genuine Windows 8/ 8.1 Home Key stored in UEFI or firmware etc?
By Clean install I mean not updating but directly trying to install on a computer, on which Windows 10 have never been installed before.
View 3 Replies
Jan 10, 2016
While re-installing Windows 10 on my Samsung ativ book 9 (15" core i7), I had two partitions (256 gb ssd) half capacity each one, one holds the os, and the other my data.
when selecting the partition where to install windows 10, it tolds me that I cannot so i googled it, i figured out that i have to clean the partition and then convert it to gpt using diskpart.
so i did but instead of cleaning the system partition it deleted all the disk data in a second.
I have now one unallocated partition (256 gb), i created 3 partition afterwars, 500mb efi, primary for os, and third for my data. windows 10 installated successfully, but my data all gone.
I tried every single data recovery app, but all of them just recover some folders that doesn't have any value like desktop.ini. (by the way, i tried in the days after this data earthquake not to have new data to avoid overwriting the old precious data).
View 2 Replies
Jul 29, 2015
Stupid question probably, however I cannot find an answer online and I'm not the most tech savvy.
I bought a HP laptop around Christmas last year. The laptop came with a recovery partition, which I still to date haven't got around to getting a 32gb drive to back it up to.
I stupidly left W10 installing this morning when my upgrade was offered, but am worried now that the partition with my recovery may be deleted and I may no longer be able to get that onto a drive in case I ever need to re-install the laptop.
View 1 Replies
Oct 6, 2015
As IE11 was malfunctioning, and my GT610 driver doesn't seem to work properly in Win10 32 bit, I attempted to upgrade to Win 10 x64 on my machine (Dual core, 64 bit ready, 4GB ram), and whilst doing so I think I've deleted the C: boot partition. I had partitioned the C drive and put the data in F: drive partition before hand so I didn't lose all my data.
When rebooting, I got the message "bootmgr is missing", so tried to boot from a Win 10 32bit iso DVD. I can get the DVD to launch, and tried to go through a repair, but got the message that the drive/partition was locked. I can't repair it, or boot. I also tried fixing it using Minitool Partition Wizard, which shows the partition without a label and as "unformatted". wasn't sure whether I should format the partition or not.
what I can do, to unlock the drive (from command prompt?) and then reinstall or repair Win 10.
Can I keep the F: partition with the data on it whilst doing an install of the x64 bit windows, or will I have to reformat the whole disk because of the different architecture?
View 9 Replies
Nov 18, 2015
Does not meet system requirements
Get Important updates: cleared.
Gets windows 10 ready but then it
Checks requirements:
Windows does not prompt any choices,
We couldn't update the system partition
Dialog crashes.
Does not allow one to choose which partition
Gateway Nv59
64 bit Intel 430m Duo core
Windows 7 Premium
500GB hdd
8GB Gskill ram 1333mhz
Take note here that I cannot merge any of the disks, they all result in error or System lock. I can't make the 35MB system disk larger, but Easeus, Windows disk formatter and some other major ones I've tried just say No. But the problem is windows 10 doesn't give me the choice to overwrite the C or H which is quite large enough.
Take note that i just used the SAME flash drive to boot/install windows 10 to a friends lower spec Intel i3 laptop with 1/2 as much ram from Win 7 BASIC. Don't tell me It's not powerful enough..
View 9 Replies
Jul 30, 2015
I was wondering if I do a clean install when I get the free upgrade from windows 8.1 to windows 10 if my device drivers (for my cpu, usb ports, wifi, etc) will stay.
View 1 Replies
Dec 25, 2015
My laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
View 2 Replies
Dec 4, 2015
I'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
View 6 Replies
Jul 14, 2015
All the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
View 6 Replies
Feb 23, 2016
I have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
View 3 Replies
Aug 13, 2015
I upgraded to windows 10 but now I want to roll back to windows 8.1. In the future if I want to perform a clean install in my laptop will my windows 10 still be activated?
View 3 Replies
Nov 9, 2015
When I got my computer in 2012, I used Windows' own mover to move all files and settings over. I didn't know that that was a bad idea, and so ended up with a corrupted profile and some bad settings.
I am finally ready to do something about it.
Here's my setup:
* Windows 10 (which I am loving, by the way)
* Two drives, C and D. C is my boot drive.
I want to format a new SSD drive with a clean Windows 10 install and then replace my existing C drive with that new drive. I know this means I will have to reinstall everything that is on my existing C drive, but I'm fine with that.
Here are my questions:
1. How can I format my new SSD drive with Windows 10 and get it set up as my new C drive? I have a USB connector for the new SSD drive so I can access it from a USB port first; can I use that connection to install Windows on the drive? The new SSD came with software to clone my existing C drive, but of course that is not what I want; I want a clean install to get away from the corrupted install. Can Windows recognize and format a drive connected through a USB port?
2. When I put my new drive C into my computer, how do I tell my computer that I want that to be my boot drive?
3. Once I get the new SSD installed as my new drive C, how do I format my old drive C as a drive E with Windows 10? Again, I am fine with wiping out everything on that drive once I have a new C.
4. I have a lot of programs installed on my D drive and want to keep them there. Will I need to reinstall them? (Again, if so, I'm fine with that.) Or would symlinks work?
View 6 Replies
Aug 21, 2015
So I did a clean install of windows 10 because my computer was running slow, but now I would like to downgrade back to windows and I don't have the "windows.old" because of the clean install.
Any way to downgrade to my old windows 7.
View 9 Replies
Aug 19, 2015
I originally followed the path to upgrade my 8.1 Pro to Windows 10. Everything went fine and I created the USB during the process. Activation was OK.
Then after a few days and some unusual problems I reloaded my last Image of 8.1 Pro.
Question is Can I go back and just do a clean install since I have already did the upgrade process?
View 3 Replies
Dec 20, 2015
Second PC with Win 7 Pro 32 bit was a struggle...but succeeded in Brinks clean install and activation of 10...but was a real struggle.
Now...how can I transfer the new 10 install on an HDD to a new Sata SSD in the same box ? So far haven't figured out how to make the SSD with an installed image of the new 10 install from HDD to boot from the Sata at PC startup ?
What am I doing wrong...and how do I get the SSD image of my new 10 clean install to boot from the SSD ?
I think it has to do with partitions and active Windows partition but don't remember what/how to change the boot disk to the new SSD....
View 3 Replies
Jan 30, 2016
I upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
View 9 Replies