Win 7 user here, wanting to dual boot with Windows 10 preview (on a different partition).
So I made a Win 10 usb boot disc, and it installed it fine. Played around with the new Windows for a few mins, whilst it downloaded an update, and after installing the update, it said it needs to restart, naturally. So I did.
However, since then, the PC keeps restarting, showing a Windows 10 logo, and below that is the text, "preparing automatic repair". Then it just resets, and goes in this endless loop.
I bought a new tablet and recently I decided change Windows 10 from English to my own language (Finnish). I have done clean install on my other computers (desktop, laptop and 8 inch tablet) with no any problem.
Here some basic details from the tablet:
Teclast X98 Plus Intel Cherry Trail T3 Z8300 Window10 Tablet PC IPS 2048x1536 4GB RAM 64GB eMMC WiFi HDMI
(Intel Atom X5-Z8300) 64bit Quad Core 1.84GHz
So, I made Usb installation media from MS by using choice "Use settings for this computer". Then I started the installation from the usb. I formatted the C: drive and installation continued untill "preparing files for installation" at 74% crashed "IRQL_NOT_LESS_OR_EQUAL". I started the process many times but allways there are some error like mentioned or "KMODE_EXCEPTION_NOT_HANDLED" or something else. The best achievement was 94% but never 100.
As I mentioned, I have done clean installation many many times with other computers, even removed all the restore drivers. I know Windows creates new ones. Never before I have had no situation like this. Is that some device fault?
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
I'm booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
Inserted my new SSD to a SATA3 port and, next to my HDD 1TB, and went for a clean install right away. The system installed without problems (wiht the old HDD still attached), then i booted up the system (was a bit weird, because two versions were showing, however i formatted the old windows partition) and installed my programs. I saw that a 110 MB of data were still sitting on my old partition where the Windows 10 was earlier. Tried to delete those files but could not. However I shut down my pc and wanted to boot up again. Then it showed me a screen with "select proper boot device or restart computer". I went to BIOS to see if my SSD was set to primary boot device, but it was. But when i manaully select the boot device, my SSD, after starting up the computer, it boots into Windows and is running normally.
Can it be that there is no boot partition on my SSD and it wants to use the boot files from the HDD?? I also tried to unplug the HDD and boot up, but the same massage was showing up. But when i select the boot device manually it works.
I am trying to do a clean install of windows 10 on a new SSD on an HP Pavillion purchased in 2009 or 2010. I am booting from a DVD. All is going well in the beginning of the install. I get past the product key verification and partition section. Once it starts copying the windows file during the install it has been giving me the following error message and stopping the install:
"Windows cannot install required files. The file does not exist. Make sure all files required for installation are available and restart the installation. Error code: 0x80070003."
It has made it to different percentages of copying files before it gives me the error. Once I believe it made it almost to 100% and then gave me the error.
I have since re-downloaded the ISO twice onto different discs with no success. Have called microsoft support with no success. Tried booting from USB but the computer does not seem to support it. Tried updating bios but no newer versions were available.
I have two Windows 10 installations on my PC. Primary and temp. The primary installation cannot boot with error "The boot configuration data file is missing some required information ".
This happened aftter I wiped out another third disk which was the PC's original disk and apparently kept some boot info.
I have a USB boot disk but that does not see my Primary Windows 10 installation because the drive is running a 950 pro m.2 ssd which there is no drivers for when booted in the USB.
So there is no way that I know of, to use the USB and run a boot repair option on Primary installation.
The other Temp installation can boot into windows 10 and it does see my Primary installation's partition ... but how do I repair Primary while booted in Temp ?
I have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
I installed Windows 10 on my Win 7 HP Envy 4 laptop recently. A week later, the computer began running very slowly and the start menu and notification center stopped working.
Finally, I decided to do a clean reinstall of Windows 10, using the media creation tool and a USB drive. I was able to get the installation started fine, but after 20 minutes it hung on "the computer restarted unexpectedly or encountered an unexpected error." Attempts to hit "OK" and start again bring up the same message and the same circling dots. I've tried the regedit fix described on various sites, but regedit also hangs before I'm able to exit. Now the computer hangs on a screen asking for the Win 10 product key. No way to enter it even if I had it.
I'm at a loss on what to do now. The computer won't boot to safe mode. I can access the BIOS screen, but only the two first keys are responsive; trying to change boot order, for example, just results in the same reinstall error message.
Have I hopelessly bricked this machine? I'm not worried about losing files, but I'd sure like to get this thing running again.
I ran the window 10 installation last night on my Lenovo Y50 laptop. Today it is stuck in an endless loop of trying to Preparing Automatic Repair, diagnosing PCs and wanting to restart. I can't get past the limited choice of options to actually do anything useful. I just want to get rid of the thing and go back to Window 8. I am to computer stupid to know how do this. I only recently got the laptop. I don't have a recovery disk.
My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
Its a friend's machine that might benefit from a repair install. I have a cd with the techbench iso download burned via Imageburn software.
I installed Win10 v2 with this cd successfully. The friend used the media center download routine to update to Win 10 2nd version. There are various issues and the latest was a MOAPPHang ...
Is it possible to to use my cd iso for a repair install on the friend's machine? Both machines are 64 bit.
I recently tried to fresh install Windows 10. I ended up getting stuck in a install loop with the error INCOMPATIBLE_BOOT_DEVICE so I tried to use a USB instead. This resulted in an error saying my USB was formatted in NTFS instead of Fats32 (even though I had just formatted it to be fats32).
My first question would be how to fix this error? Now, while trying to download Windows, I accidentally deleted my Linux partition (woops). My second question is to just delete all partitions on my hard drive and restart from scratch? I'm attempting this on a Lenovo Ideapad y510p.
I'm trying to resolve an issue with a Windows 10 desktop, HP small form factor purchased with OEM Win 7. Windows Update suggested Windows 10 and now the machine boots to the automatic repair screen but there is no mouse or keyboard function where the option panes appear.
While I did purchase the computer myself originally, it was purchased for the use of my church group, and two weeks ago came under the care of my co-deacon and friend. So, let's just say there is no recovery media now for Win 7 or Win 10. I can create a recovery disk here at home from one of my local Win 7 systems, but not sure if that will work or not.
I'd be perfectly happy to un-install Win10 from the machine, but there doesn't seem to be a way to get to the recovery partition... all F-key options have been tried.
So when I'm trying to log on, my computer does the whole automatic repair thing, but constantly loops. Now, I know this has been notified before, even for windows ten, but it seems I just can't fix it. All the solutions on the articles I've seen don't seem to work .
Although, the upgrade this morning initially was successful - it did reboot into Windows 10. When I restarted the machine, it's now stuck in the setup repair loop. None of the options seem to work, even if I try and have it reinstall windows while keeping my files, it still restarts and goes back to the setup repair. I really don't want to do a clean install as I didn't make a backup of my files (which I will always do from now on).
my computer which is a HP Envy 700, operating on windows 10. I think it's 64 bit but I'm not 100% sure.Everything has been fine until I switched it on this morning. I switched it on then went off somewhere, came back to see it was running a disc check and then I got a blue screen saying my computer had ran in to a problem and needed to restart.
It goes into a loop, of not being able to start up. It won't even load in safe mode. I've tried a system restore but the only date it will reset to is the day before. This fails, it says the restore file is damaged or something.
My housemate looked at it, only had him for an hr before he had to go out but he pressed a key as the computer was starting up, and set something so that the computer would start up using(?) a USB, on this USB he put an installation file for windows 10. He tried to run a repair off this USB and tried to run the repair (which would not delete my files). Annoyingly this didn't work, I've lost the page, but it said in order to do this, youd have to run windows normally. Which we can't do.He says the last thing he can try when he gets back is to install Linux and save the files I want to keep using that, and then format the computer. It didn't sound like he thought that would work though.
I worked with my friend install windows 10 on his desktop pc. but after installation, it wont boot, rather showing bsod error 0xc000021a, we have tried reinstalling for a couple of times, but the error persisted. BTW, the previous os was windows 7. We deleted the previous OS's partition and installed it there, but it seems like nothing happened.
I am booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
So i found a possible repair on fixing the current situation o the infinite loop from this forum [URL].... around step 13 it said"If any one of them are 0 bytes, then you should stop what you're doing now and seek an alternative method of recovering your system, because Windows cannot function with a 0-byte size registry hive ". I have 0 as my "RegBack" values and i can't find an alternate .
Recently I got a new gaming PC which came with windows 7. The day after i upgraded to windows 10 and it was working fine. Yesterday i was using my PC and then the task bar disappeared so i decided to restart the computer to try and fix it. When the computer turned on again it went through the normal startup process but when it got to the windows logo it said preparing automatic install and then kept looping through startup and the windows logo. I have tried doing the system repair but when I press F8 nothing happens, so right now all i can do on the computer now is access the BIOS.
I have a booting problem with my Windows 10, after having it for two months. Few days ago after turning my PC on, I had a message Starting Windows Repair, after some time it shows me the same screen with text - Diagnosing your PC. Then after having a black background, a light blue screen appears with error 'Your PC did not start correctly', it gives me options to restart it again or to open on Advanced options. There are so many of them, I tried all except the one with Restarting PC and deleting files, all the others, including Safe Mode won't work. I am stuck now here and can't use my PC.
have an Asus Laptop running Win 10, upgraded from win 7. While reading one of the many links from Facebook, using Chrome as a browser, I got a popup that looked like some kind of ransomware . The popup would not close so I turned off the computer.
Now when I turn the computer on it flashes the Asus logo. Then “preparing automatic repair”, “diagnosing your computer” followed by “repairing your computer” appear. It then tells me that the PC did not start correctly and gives me the option to restart or advanced options. Restart brings me back to this point.
Advanced options gives me three options, Turn orr the PC that does that, Exit and continue to Win 10 that gets me back to the previous step or troubleshoot. Trouble shoot gives me the options to reset or more advanced options.
Reset is either a partial or full removal and reinstall or windows. I have some academic software that I do not want to lose if possible and in any case do not have any media to do a Windows reinstall.
The advanced options gives me six choices.
1 System Restore, but there are no restore points found. 2 System image recovery, but I do not have an image disc . 3 Startup repair, starts the process all over and does not find the problem. 4 Command Prompt, appears to open a working command prompt. 5 Startup Settings, Gives me a non clickable list of options but just continues the loop. 6 Go back to previous build. It warns me that I may lose apps and any changes I have made, but not my personal files.
The System is an ASUS laptop, X54C, made in 2012 with Widows 7 Home premium updated to win 10. I have no other access to the computer.
I've been using Windows 10 for few weeks now and it's been really good.
8GB Ram 1 TB Hard Disc Asus Motherboard i5 processor
Used the PC as I would normally do and shut it down last night. Recently installed the latest update for Win 10 as I recall. Otherwise no new changes or installation to the system.
So now when I switched it on its showing Automatic Startup Repair and it diagnose the PC but fails every time and shows a blue screen of startup repair where I can:-
- reset PC (reinstall but this fails at 36%) - system restore or image restore ( but can't use either) - startup repair (doesn't work either) - command prompt (tried sfc/scannow and they won't allow me to do so unless I restart but keeps getting same error.
Tried unplugging the hard disc etc but same old loop again.