Installation :: Complete Wipe Out Of System - Stuck On Finalizing Settings
Feb 10, 2016
I'm writing this before having to do a complete wipeout of my system
Specs:
Lenovo Y510p
Hybrid HDD (Seagate) 1TB
m.2 SSD (Trascend) 256GB.
So, since build 9841 I've been using Windows 10 Insider Preview (IP) as my mainly driver. Until the recent redstone builds, Visual Studio has been plagued with problems (From Windows Universal Apps Development to ASP.NET) . I've installed Windows 10 IP in the SSD and have been using it very happily since I've had no major issues, until the ones I've outlined before.
In my Hybrid HDD I had Windows 10 RTM (10586) installed and didn't use it for a quite while (3 months). When these problems rose, I decided to start using that partition again, but out of the blue it decided to start giving me some serious problems: mostly, the whole XAML interface (Start, Volumen, Sound, Battery, etc.) didn't show up. After trying some fixes (From reinstalling Windows Apps to Creating a separate user), I decide to refresh the bits. Unfortunately, even after refreshing my machine didn't fix the XAML interface problems and even worse: I got no possibility to run Universal Apps.
I went and ran some hard disk checkups, from both: the Lenovo Utility and CheckDisk and none threw an error.
The actual problem: Yesterday (Feb. 4) I decide to clean install Windows 10 Build 10586 64-bit in the Hybrid HDD partition (without deleting the OEM reserved spaces) and I'm stuck now on Finalizing the settings. Is there a way to fix it? Tried hitting Shift + F10, but in that specific screen it does not work. In previous screens there are no anomalies.
As last resort I must wipe out everything in both drives and start from zero. I would not like to do that, since Visual Studio is so tough to install (takes too darned long). Is there a way to resort to an alternate method?
View 1 Replies
Similar Messages:
Aug 1, 2015
When upgrading I get"windows version is on a not supported folder" and all other settings greyed out but clean install.My C drive is on a SSD. Using MediaCreation tool .Tried various things (URL...)
View 9 Replies
Nov 19, 2015
I've just clean-installed windows 10 here, then updated everything possible. Now when I try to open the following system settings, nothing happens:
Apps & Features
Storage
Offline maps
Windows is digitally activated and scannow found no errors.
I've seen no one at all with similar problem, except that "settings wont open" issue which has been fixed.
View 9 Replies
Aug 16, 2015
I have a problem, I installed windows 10 and now I'm stuck in a boot loop after attempting a reset to wipe my files in hopes to make things a little faster, and now I'm unable to do anything other than enter the BIOS.
View 1 Replies
Jul 29, 2015
I've tried installing a few times, and every time it gets to 75% with 1% in configuring settings. It'll stay like that for hours, so I've forced shutdown and restarted. It reverts to Win8.1, and in Windows Update it says there was an important update that didn't complete, error code: "WindowsUpdate_C1900101 OR WindowsUpdate_dt000". It starts downloading Windows 10 and we go around again.
View 9 Replies
Jul 30, 2015
When I got the windows ten upgrade notification this morning the while thing went pretty fast, but now for the past 7 hours, it has been stuck on a black screen with nothing but a white box I. The top left corner saying - Personalized Settings- setting up personalized settings for : Web platform customizations.
View 12 Replies
Sep 20, 2015
I am a total UEFI n00b, only having one PC with it all others being legacy BIOS systems. I know my way around BIOS and have now familiarized myself with UEFI settings, I think that in settings and how to change them / what they do.
My issues are with a clean install wiping the whole disk, and to understand the partitioning. This PC had an OEM German Windows 8.1 which I upgraded to 8.1 Pro, then replaced the German 8.1 Pro with an UK English one simply by clean installing a retail 8.1 Pro on top of the German one, not wiping the disk but the "traditional" way which simply moved the German OS to Windows.old folder which I later removed.
The UK English 8.1 Pro was later upgraded to 10 Pro Build 10240, further to builds 10525, 10532 and finally now to 10547. Now I would like to start from scratch, clean install totally wiping the disk.
Questions:
Why three recovery partitions (white highlight in screenshot above). I understand the last one, it's the manufacturer's recovery partition which allows me to restore the original OEM German Windows 8.1. But why the two others?How do I proceed with clean installing Build 10547 wiping the whole disk? I tried it, got to disk tools in setup, removed all other partitions but the dialog didn't let me to delete the partition C: (yellow highlight)Essentially I would like to start from this situation (screenshot from this TF tutorial), whole disk unallocated space, partition it as I want to and install Windows. If this was a BIOS system I could easily do it, the Windows Setup Disk Tools dialog creating the System Reserved automatically when I create the first partition in that unallocated space, but UEFI seemingly lets me to delete all other partitions but not the C:
I have recent system images allowing me to restore this functioning system anytime I want to, making experimenting easy.
View 9 Replies
Feb 10, 2016
My laptop became a bit slow and explorer crashes often. So, to clean install, I am guessing "Reset this PC" should work.
There are 2 options "Keep my files" and "remove everything". I have partitioned the hard drive space it to 4 local disks and installed windows 10 on C drive. I want only C drive to be cleaned and rest of the disks data to be intact. Which option to choose?
Additional Info: My laptop came with Windows 8 and I upgraded to W10. So I am hoping this reset option wouldn't mess with activation.
View 1 Replies
Oct 20, 2015
If I was to make a complete image of my system warts and all. What would be the best way to create it?The media creation tool kit or something else?
View 7 Replies
Oct 3, 2015
Recently, I purchased a Microsoft Surface 3. From the day I got the tablet, it has been having freezing problems that seem to progressively get worse and worse. Today, I couldn't go two minutes on my Surface without having to restart it.
I would prefer to return the product, but since I can't, I decided to first try to update it. The update kept getting frozen, encountered an error or would just be stuck at 0%.
After exhausting all the other options I knew off, I quickly moved what little files that I had off of my tablet and then performed a factory reset.
The factory reset got stuck at 99%. And I don't mean that it just was there for a few hours--no, the screen literally froze. So I restarted the tablet again, which brought me to a screen that says, "Choose an Operating System" that has two options. Both options are "Windows 10 on volume 3." There seems to be no distinction between them. But the problem is that if I click one, and it doesn't matter which one, or if I just let the tablet automatically run on one of them, it loads for a few seconds with the "Surface" screen, and then immediately loops back to the same "Choose an Operating System."
View 1 Replies
Feb 10, 2016
I am currently an Windows 7 Professional user, and I was seriously considering to jump to Windows 10.
After upgrading, I was thinking in doing a factory reset, in order to try to mimic a clean install of the system. When exploring the options on Internet, I discovered an option to clean de drives completely.
Currently I have 2 drives, my C unit where the OS and most of my software is, and a D drive, in which I have my music, documents, videos and other files not relevant for the system itself.
If I select the options to clean the drives, will it delete both drives or just the C drive?
View 5 Replies
Dec 3, 2015
When I go to Windows updates the system will not complete loading
View 3 Replies
Jan 16, 2016
Fairly new to PC building. I built my current PC with windows 8.1 and it ran OK until I upgraded to windows 10 then it would just freeze and everyone in awhile Bsod different errors but mostly DPC_WATCHDOG_ERROR. other problems the USB, mouse, and keyboard slots will randomly freeze forcing reset.
View 3 Replies
Aug 4, 2015
Windows 7 to windows 10 killed my windows 7 install.Is there a way to do the upgrade with out a complete install of windows 7.Using the windows 7 Lic Key.
View 3 Replies
Aug 12, 2015
Afrer 2 days 4-5 times download failure this time download completed...
But when i click on"ok lets continue" button it shows"working on it" and nothing happening since hours
View 3 Replies
Sep 2, 2015
I just ran Windows Update and all seemed well, I rebooted as usual but when I logged in again i just have a black screen with a small white window that says "Personalized Settings (Not Responding)". If I Ctrl+Alt+Delete I can get the Task Manager up and it says Windows Explorer is not responding. So I shut that down and the box goes away. That's all. I can Run New Task and open Explorer but then I just get the box again.
View 1 Replies
Aug 9, 2015
I am upgrading from Win 7 64 bit to Window 10 via the upgrade notification in system tray. It has been sitting on 92 % (configuring settings 69%) for about an hour. Is this normal? Or is it stuck? And if its stuck, what do I do. Can I reverse this upgrade back to Windows 7?
View 7 Replies
Oct 7, 2015
So i just finished building my new pc and im installing windows 10 on it and i added this old hdd for extra space from my old pc but it has windows 10 preview build on it and the whole filebase from the previous pc. How to wipe the old OS and all the stuff on it? Do i just format it or do i have to do something else? will it mess with my pc since im installing the new windows 10 on an ssd but the hdd has the preview windows on it so basically two copys of windows....
View 1 Replies
Oct 6, 2015
It seems like my Lock Screen wallpaper is stuck on "Windows Spotlight". When I try to change to "Picture" or "Slideshow" in settings nothing happens, and when i choose "Slideshow" and then "Windows Spotlight" the preview turns grey with the loading indicator and nothing more happens.
Would really like to be able to choose my own lock screen wallpaper, though Spotlight is a pretty cool feature.
View 1 Replies
May 12, 2015
I was just wondering if installing windows 10 in a clean install will wipe all my data , I know it will format local disk c (on which windows is installed ) but what about other drives ?
View 6 Replies
Jan 28, 2016
I have just received updates for Windows 10, nd now when I boot up, I get a message, a copy of which I have attached to this post. This is after I sign in.
It matters not how many times I reboot, this message pops up each time.
View 2 Replies
Dec 17, 2015
I have gone into settings in my Windows 10 and changed the default music player from groove music to windows media player. But when I click on music files, it automatically starts playing in Groove and NOT windows media player. I have restarted Windows several times with the same results.
View 2 Replies
Aug 31, 2015
After restoring my computer back two days using System Restore, I noticed in PC Settings>Personalization>Start>Choose which folders appear on Start, that all the options are greyed out except "Settings". I was wondering if there was a way to fix this? I already tried SFC /Scannow and DISM.exe /Online /Cleanup-Image /RestoreHealth, but neither fixed the problem.
View 4 Replies
Nov 9, 2015
My settings app keeps freezing, but only when I select System > Apps & features and System > Storage, at least as far as I am aware of.
I am running build 10586, but already had this problem in build 10571, the first one I had as an Insider for PC.
View 1 Replies
Jan 10, 2016
I'm seeing System Settings Broker "stopped working" in the reliability history. Additionally, I'm seeing a lot of issues with the Windows Shell Experience Host in the event viewer. What happens is that the action center is not accessible (clicking on it does nothing), and hitting the Win key to bring up the start menu does nothing.The support over at answers.microsoft.com is pathetic.URL...
View 3 Replies
Sep 18, 2015
Few weeks ago i got Brand new Windows 10 Installed on my Pc and i had Dolby Sound System installed together with my laptop on windows 7 and after i upgraded i noticed that sound got very weak and so i tried to find that dolby system equalizer and i coudnt find it just a buttom to turn it on and off. It was so much better on Windows 7 because i had possibilities to manage all sound settings and everything how i wanted, but now i can only turn it on and off. So i wondered is there any program that can raise the sound or give some sort of boost because listening to music now its just terrible.
View 1 Replies
