Installation :: Data On Separate Partition Or Drive
Jun 29, 2015
Wondering how Windows 10 deals with putting data on a separate partition or drive. Does it use the same general method as in Windows 7, where it re-maps (for example) "Documents" to a folder on a different letter drive path? So that C:Users{user}Documents becomes G:Users{user}Documents?
I'm hoping that it actually becomes more like *nix, using symbolic links to point to the right place (so C:Users{user}Documents points to the separate partition of drive). Personally, I find the Win7 method to be clunky and problematic in actual use.
I created the USB recovery drive successfully with the option "Back up system files to the recovery drive". Since I needed the USB for another purpose, I transferred the files from the USB to a separate partition on an external HDD and made this drive bootable using YUMI.
So now, on the same laptop, I am able to boot to this new partition on my external HDD where windows recovery environment comes up just fine. I did not want to test the reset or refresh part. Out of curiosity, I clicked on the "System Restore" option on the advanced options screen. I got an error message "To use system restore, you must specify which Windows installation to restore. Restart this computer, select an operating system and then select System Restore"
I was running win 7 with 4 partitions , thought to upgrade to win 10. While installing it didn't allowed me to install. I thought i can run diskpart clean on one partition, selected one volume and ran clean command, but it still cleaned all the partitions. Long story short, I cannot boot my OS until I install OS on freshly created single partition. I was told to use partition recovery apps like partition and mount software, Do I have to install OS on it anyways and once OS is installed, instal the partition and mount software for the recovery?
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition remain or, as I thought I read, Windows will format the entire disk?
Because of a problem with 10 a tech told me to revert to 10270. I backed up everything important to my D: drive first. I did a complete formatting of C:. Then upon installing 10270 onto C: I first blew away the partitions on D:, realizing what I had done just after hitting the keys.
I have run Easeus's free Partition Recovery software but it finds absolutely nothing, even in deep scan.
Is there another reliable method with which to attack the problem of restoring the partition tables for D:?
I upgraded my custom built desktop from Windows 8.1 Pro With Media Center (Originally Windows 7 Pro Retail), and I've noticed I now have an OEM (Reserved) partition on my drive. I'm just about to do a clean install, and would like to know if it's safe to delete or whether I have to leave it there?
Stupid question probably, however I cannot find an answer online and I'm not the most tech savvy.
I bought a HP laptop around Christmas last year. The laptop came with a recovery partition, which I still to date haven't got around to getting a 32gb drive to back it up to.
I stupidly left W10 installing this morning when my upgrade was offered, but am worried now that the partition with my recovery may be deleted and I may no longer be able to get that onto a drive in case I ever need to re-install the laptop.
I've already upgraded to Windows 10 on my desktop PC, and there were no issues with the upgrade. However, I work from home and my work has informed me that they won't accept Windows 10, they will only accept 7 or 8.1 as their operating system (they also only accept Internet Explorer for browsing, etc.). So I can either downgrade, which I really don't want to do, buy a second PC, which I can't afford to do, or (I'm hoping) create a new partition and run Windows 7 from that.
So my question is, is it possible to create a new partition for Windows 7 while running Windows 10 on my main partition? Will I have to downgrade and install Windows 10 later? Or can I do it from Windows 10 already?
I currently have one drive that contains a System Reserved partition (which includes the boot files). The status is System, Active, Primary Partition.I have another drive with the C: partition. The status is Boot, Page File, Active, Crash Dump, Primary Partition.I've been told that if I remove the disk (it's a bit flaky) with the System Reserved partition, I won't be able to boot up. If this is true, is it possible to transfer that partition to another drive? If so, does it have to be at the start of the drive? Alternatively, can I make the C: partition include System status?
I have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
What I'm planning to do is upgrade my rig with an SSD, but I don't really want to lose my files. Is there a way to refresh Windows, and have the "refreshed" install and my files on a separate drive than what Windows was originally installed on?
I'm trying to access my user folder on a different hard drive, but it takes forever to load and then afterwards does nothing. I think I've already set all the permissions and stuff but it still isn't working.
while trying to troubleshoot a lousy 1.5TB WD drive I had accidentally deleted and recreated the partition on a different USB drive without noticing.What are my options? I don't have a spare drive to restore to. The drive was only using 350GB of 900gb, but it has been filled and erased several times without defragmenting. I have it unplugged now.
It's not entirely a disaster; aside from my (dubiously obtained) movie collection there's nothing really that I need and can't redownload or have on my SSD.
While re-installing Windows 10 on my Samsung ativ book 9 (15" core i7), I had two partitions (256 gb ssd) half capacity each one, one holds the os, and the other my data.
when selecting the partition where to install windows 10, it tolds me that I cannot so i googled it, i figured out that i have to clean the partition and then convert it to gpt using diskpart.
so i did but instead of cleaning the system partition it deleted all the disk data in a second.
I have now one unallocated partition (256 gb), i created 3 partition afterwars, 500mb efi, primary for os, and third for my data. windows 10 installated successfully, but my data all gone.
I tried every single data recovery app, but all of them just recover some folders that doesn't have any value like desktop.ini. (by the way, i tried in the days after this data earthquake not to have new data to avoid overwriting the old precious data).
I originally started with a HDD with windows installed on it and data in anther partition on the drive, then got a SSD and moved the windows partition onto it,
my drives and partitions look like this:
I'm not sure if to remove the old SYSTEM partition or not, and if the SSD needs one also, My boot is also a lot slower on windows 10
What is the MapData folder which has recently appeared on my D drive? (This is the drive containing all my user folders with the exception of Pictures.) It contains subfolders diskcache, mapscache and files overrides.json, updater.nma
There was a folder titled Windows.000 that was created after my previous upgrade to windows 10. This folder had all of my data on it and now it has completely disappeared. It feels like somebody has physically come into my home and gutted my hard drive. My C: properties say 1.9GB Free out of 2... WTF??
One of my WD Green 2tb drives has become raw and can't be used. Windows will not complete a format of it. Shows up in my computer. Is there any way of saving this drive?
I am currently trying to convert my mSATA SSD from MBR to GPT. I have downloaded EaseUS partition master and can see that I can convert the disk using the software. My question is however if this is possible to do with my mSATA drive that my PC boots from and has Windows 10 installed or does it have to be a drive that is not booted from. I know there are lots of threads on this however none specify of this is possible using the drive you are booted from.
So when I decided to build this pc, i wanted it to have Win7. When i booted it up, i kept getting the message asking if i wanted to upgrade to Win10. so i thought "hey, i paid 50 dollars for win7, so why don't i upgrade to win10 for free instead of paying 100 dollars," so i did. and all of my downloads and files, everything, saved so i didn't have to download everything again. but turns out i don't like win10. so if i go back to win7, will everything stay on my hard drive?
I just bought a new computer and it comes with Win 10. I need to plug in my old hard drive with all my installed programs and data (Win 7) and moved them to that new drive (Win 10). Is there a software that you would recommend for this and what should be done? Clone or image? I am lost in terminology!
