I created ISO disks for both my 32 bit and 64 bit systems at the MS download site. If I use the ISO disk instead of the Windows Update method, does the install still create the W7 image in case I want to go back to W7 after installing W10?
Also, do I boot from the disk or do I go into the ISO disk and click on Setup?
First of all, I upgraded to windows 10 from windows 7. My device is a ASUS K55vd notebook. When I was running on windows 7 I successfully created a factory image disk via ASUS ai recovery application (a five bootable disk). Then I decided to upgrade my hdd to ssd. My idea is to have a clean factory installation of windows 7 on ssd so I didn't clone my old hdd.
What I did was mount the ssd and ran my recovery disk and successfully installed a fresh windows 7, it is then when I update my windows 7 and went to windows 10. Currently I'm running on windows 10 and there is the notification of creating a factory disk which I would like to do but as soon as I start burning the disk it says that the recovery partition does not exist even though I have my recovery drive ( R: ).
Next, I tried creating system repair disc from Control Panel>System and security>Backup and restore (windows 7) then this prompt came. "The selected disc cannot be used. The selected disc does not contain a valid Windows installation."
Lastly I tried creating system image also from Control Panel too. However it failed and says that the mounted backup volume is inaccessible.
In my reagentc /info:
In my disk management:
I would like to ask for some solution regarding that and I'm wondering if the previous factory image disc that I have from before (win 7) is still usable if I decided to factory reset my pc? And can I make a bootable disc in which it reverts my windows to the point where I freshly upgraded to windows 10 so that I would relieve myself the hassle of upgrading again to windows 10 when the factory image disc work (in which it will surely reverts my windows to win 7).
I recently purchased a new Windows 10 laptop (HP), which I presumed is a 'clean install' and I'm mooching around looking into how to create a recovery disk. Anyway, when I go into control panel, underneath System and Security I see a link that says; Back up and Restore (Windows 7).I'm wondering why there's a reference to Windows 7 on my Windows 10 device?
View 6 RepliesI have 3 HDD's (2 internals (1 SSD 120 GB and 1 HDD-Sata 200 GB) and 1 external USB HDD (2 TB)). I have installed Windows 10 Pro x64 final οn the SSD 120 GB without problems and i have installed the extra programs that i use, also without problems. Then i decided to make an image backup to the external USB HDD. The image created succesfully. After that, i have removed the SSD 120 GB, installed the HDD-Sata 200 GB and tried to check to the HDD-Sata 200 GB if the Windows image recovery works. I used the Windows installation DVD and the external USB HDD to do the recovery.
The image recovered normally and the HDD works like as if i was using the SSD 120 GB. So my problem now is with the capacity of the HDD-Sata 200 GB which is shown as 120 GB. So any way to restore the capacity of that HDD again back to 200 GB? I don't want to format the disk now, just continue to use it as a backup disk just in case of failure of my SSD one. I know that i cannot use the HDD Capacity Restore Tool, because it is working only with 32-bit systems (which i currently don't have one right now) and even if i use it i don't know if it will restore my disk to full capacity but in a state that requires format from the begin (something that i am trying to avoid).
So in general, my question is how to restore the capacity of a hard disk after image recovery (when you backup to a new hard disk with capacity bigger than the capacity of the disk that i want to backup).
What size usb drive do I need to create windows 10 recovery disk....
View 1 RepliesI have a handful of questions and issues with "Create Recovery Drive"
1. How dose Windows 10 Recovery disk work? When I first tried to create a recovery drive, it specifies the drive size I would need. One said I would need a USB that would take up to 8GB, the other specifies 16Gb. Since USB drives come in it's denominations of 4,8,16,32,64,...., I got 16GB and 32GB respectively.
2. Does Recovery USB Drives need to be recreated once in a while as an update since system files are added to the USB?
I have three Windows 10 PCs I need to create Recovery Drives on each of them with system files inclusive.
3. New Del Desktop, arrived with Windows 10 (64Bit). It asks for a USB that would take 16GB, I inserted 32GB but it created a recovery drive that is 8+GB only. Why? I wish it would have asked for 16Gb so I don't have to spend to get the 32Gb USB. By the way, when I inserted a 16GB USB, it would not continue.
4. Dell notebook XPS, upgraded from Windows 7 (32Bit) to Windows 10 (32Bit). When I tried to create a Recovery USB drive, it asks for 16Gb USB. When I continued, it stalled at a windows that would not highlight the "NEXT" button. This button is grayed, so I cannot create a Recovery USB.
5. Third PC is a HP desktop I upgraded from Window 7 (64Bit) to Windows 10 (64Bit). The Create Recovery USB with system files did not work. When I started the recovery, it just kept chunning and chunning for a very long time and will not stop.
I originally purchased Windows 8 and upgraded to 8.1. I installed the Windows 10 upgrade via the downloadable Windows 10 Installation Tool and burning the ISO to a DVD. I understand that this will work to upgrade my system should I need to recover but will this still work after the 1 year free upgrade period? Also, how to confirm if the ISO downloaded via the Installation Tool will work as a repair disk to recover using a system image? If that's the case I would be content with that, as it's how I've always done backups since Windows 7.
View 6 RepliesI am trying to create a recovery USB drive from which I can install Windows 10 fresh, if needed. Or quickly restore system images in case of a drive issue. There are a couple of things I am not clear about.
Background:
I have an ASUS laptop that came with Windows 8.1, UEFI (upgraded to Windows 10 at the moment). Initially, I created a Windows 8.1 recovery USB and reinstalled Win 8.1 using it. From what I understand, the 100MB EFI partition is normally the first one. On restoration, the following was created
305 MB Win 8.1 system partition
100 MB EFI
C drive
Manufacturer recovery partition
When it upgraded to Win 10, it ended up with the following partition structure
305 MB Win 8.1 system partition
100 MB EFI
C drive
450 MB system partition (I believe this is Win 10 system partition)
Manufacturer recovery partition
Questions:
The trouble is, now when I create a Windows 10 recovery USB drive, it really creates just a rescue drive (< 1GB in size) even though the 'copy system files' option is selected. I believe a recovery USB drive needs at least a 16GB drive. Not sure what is happening here?!!!
Also, is there a way to make Win 8.1 recovery create the system partition adjacent to the C drive so it can resize it to 450 MB during the upgrade? Or maybe create a 500MB partition beforehand that Win 8.1 uses during recovery and later is upgraded to Win 10? Can I create the partitions beforehand using GParted Live USB and expect the Windows recovery process to use them?
Is it possible to take Windows 10 recovery disk in a DVD? I know that recovery image can be created in a USB flash drive. Same possible with DVD?
View 7 RepliesSo my sister's Windows 8.1 laptop's hard drive is broken... with her OS on it. I'm getting her a new hard drive (internal) which I will fit, but it seems pointless to buy windows all over again when she still owns it. I was thinking I could create a recovery drive from my pc (Win10) and install it on her new hard drive when it's fitted.
View 8 RepliesWhen I attempt to create a recovery drive, I get this message.
Recovery Drive
We can't create recovery drive
A problem occurred while creating a recovery drive.
What is the answer, as I have tried this several times.
have a new dell inspiron 15-55580 with win 10 installed at factory. unable to create a recovery media drive using usb drive (16 or 32 GB). receive error message: a problem occurred while creating recovery drive."
View 1 RepliesHow do I reinstall Windows 10 from a USB Disk Image
View 2 RepliesIs it possible to create a recovery partition or image on a PC, which could recover the PC using a Fn key during boot up ?
I have a PC with a recovery partition which is for vista, which is now obsolete now Imhave moved up to Windows 10 via Windows 7.... never want to recover to vista...
would love over to create my own recovery partition, where pressing e.g. Fn11 during startup invokes the recovery process.....maybe this is too difficult...there is a program called AOMEI OneKey Recovery which promises to do such, or so it looks...
I have a custom built dual boot Win 7 64 bit OS. I got notified about upgrade availability and upgraded successfully with a minor glitch. (The monitor display went off with frequency mismatch. While I was searching the machine restarted automatically and voilla win 10 was up). It did few more restarts and I configured Kaspersky also to work. Overall it was working fine and restarts after enabling Kaspersky was successful.
However for the first time, I did shut down and system never came up. Its stuck in a grey screen of spinning wheel (GSOD? Grey Screen of Death).
Unfortunately I didnt create a recovery disk and now I can't do any action.
What I have tried
a. CTRL+ALT+DEL button works only once.. It shows 3 icons, wifi connectivity (connected to my network), accessibility option and restart option.
I have tried Shift + Restart - but no luck in bringing Safe mode..
So the only option for me is to either shut/ sleep or restart. I have tried all 3 - but always comes back to GSOD
b. Starting in Go Safe mode - I have read "tutorial" on Win 10 Go Safe mode.. None of the different options work for me as I can't see any display. I have tried using Shift + Restart but no difference.
c. I found other option is to have recovery disk. Unfortunately I didn't create one. I have seen the tutorial on "recovery drive".
What can I do?
a. Should i download win 10 ISO and try to boot?
b. Can I create a recovery disk from Win 10 preview PC ( 64 bit - from a friends pc)
I have created a disk image of the system disk, C: with the disk image software in Win 10 backup. The system disk was 70GB with 40GB of files. When I tried to write the image to the SSD the Win 10 install software said the disk (120GB= 110GB) was too small. I reinstalled the windows disk booted and shrank the system disk to just under 60 GB and retried the process with the same result. System is Win 10 32 bit on an old Acer netbook.I would like to be able to transfer the installed files to the SSD.I have looked at the tutorials for creating a system image and also how to create hardware independent image for installing win 10
View 9 RepliesI've tried using the "Create a Recovery Drive" and have tried making my own installation media using the "Media Creation Tool". Both seem to do nothing, just constantly search. The Media Creation Tool stays on the "getting a few things ready" screen for upwards of half an hour then I'll close it and it'll say "setup is cleaning up before it closes" and it'll stay on that screen forever. Even task manger won't close it - it will not show up as a process any longer, but still on the screen. EDIT: I have to shut down the computer to close the window.
Create a Recovery Drive, when choosing "Back up system files to the recovery drive", does pretty much the same thing, a screen with a green progress bar going left to right for hours. I'm trying to put it, either way, on a 32gb USB flash drive.
Its a new computer no software has been installed by me other than the MCT and a tool to find the windows product key. I'm very new to Windows 10 coming from XP.
Is it permitted to install the backup image of Windows 10 to a New bigger hard disk in the same PC. After that I will use the new hard disk only and format the old one.
View 5 RepliesLast night I wiped out my ASUS T100 tablet to clean install TH2. But there is a 7GB Recovery partition from Windows 8.1 that I can't get rid off using Diskpart.
View 9 RepliesTrying a Windows install on a Server box with 4 HDD's installed. This server also allows boot from a Micro SD card. I've got a 64GB micro SD card loaded as well.
Fails when trying to create any partition on any of the HDD's. Works if I temporarily remove one HDD or take out the 64GB internal micro SD card.
I Get a message "Windows cannot create partition on selected Disk" - even when totally empty. It doesn't matter if GPT or MBR disks either.
Seems that if you want to install a non server version of Windows (i.e Windows 10 Pro for example) 4 HDD's is the limit (a micro SD card counts as an HDD).
If I install Esxi on the SD card then no prob creating Windows VM's without removing HDD's.
I think after w10 is installed you can add more HDD's.
I got a new windows 10 laptop a few weeks ago and I'm belatedly getting around to creating a system recovery disk on usb. I'm intending to use the standard windows 10 option 'create a recovery drive'. Someone mentioned that among other things this would be useful if I ever wanted to sell the machine on further down the line and wanted to do a clean install.
My question is, does the standard recovery disk save personal data because I've already loaded some music, docs, notes vids and added a few browser bookmarks etc. Basically I'm hoping it doesn't because I wouldn't want to pass anything on. (I already do 2 separate backups of my personal stuff in case of failure, so that's not an issue)...
I am trying to restore a Windows 10 system image with no luck. Here is what led up to this situation:
1. Upgraded from Windows 8.1 to Windows 10 when it became available the end of July.
2. Made a System Image (ssd m.2 mounted on the motherboard) after I was to a point where everything seemed to be working fine on 8/12/15 and saved the image to a separate hard drive on my system (E: drive).
3. Updated the bios from 2012 to 2501 yesterday and I was no longer able to boot from the ssd drive. Windows would start to load and then give me an error that no operating system was available. Tried everything I could to get Windows 10 to boot from the ssd drive with no luck (after the initial boot manager reached the point where the operating system should begin to load, all drive activity stopped)
4. Performed a System Restore saving all personal data because I could not see the system image I had created or access the original ssd partition the had original Windows 10 on it in a command prompt from within Windows RE (the drive did not exist).
5. Windows 10 now loads less all the programs I had installed.
6. When I attempt to restore the system image from advanced options in Windows 10 RE, it gets to the point of showing me available images for which there are none showing. I copied the image from the original hard drive to a USB hard drive and to a network location. Windows does not recognize the image in any of the locations.
I read in a thread somewhere that in Windows 10, the only way to restore a system with a windows system image was with the actual OS that created it. Since I did the Restore from the original system image from the recovery partition and not the one I had made the image with I am assuming that is why Windows is not showing any image to restore.
I have a custom built system:
Asus P97 Pro mobo
Intel i7-4790 3.6GHz
32 GB RAM
64 bit Windows 10
SSD - Crucial CT500MX200SSD4
Hard Drives x2 - Toshiba DT01ACA300
How to get Windows 10 to recognize the image. I am going to give it about another hour of research and then do a clean install.
Windows 10 build 10586 x64. When I try to create a System Image I find that Windows 8.1 and Windows 10 are both selected. How Do I just create a system Image for Windows 10
View 1 RepliesI need to deploy 10+ new Surface Pro 4 Tablet in a matter of two working days.
practice to create golden image for Surface Pro 4 tablet running Microsoft Windows [Version 10.0.10586] ?
I have done the following steps but it failed (BSoD) this morning.
1. Straight out of the box it is Windows 10 Pro (10.10240)
2. Insert the SW_DVD5_WIN_ENT_10_1511_64BIT_English_MLF_X20-82288.ISO to bring it on to Windows 10 Enterprise (10.10586)
3. After the manual upgrade, I did the manual Windows Update check to apply the latest firmware & the rest of Windows Update. (Installed SurfacePro4_Win10_160128_0.msi firmware & win64_154014.4352.exe Intel graphics driver)
4. It was running perfectly fine yesterday evening on Version 1511 OS Build 10586.71 and then I manually update it again to 10.586.104
5. I ran Cleanmgr (Windows Disk Clean-up) followed by the freeware CCleaner64.exe to clean unwanted OS old updates to free up disk space.
6. I ran Sysprep to make the base line before capturing it as the base image for the rest of the tablet.
This morning when I'm about to hand it over to my CIO, it Blue Screen and crashed requiring me to reinstall Windows ?
Does Windows 10 cannot be sysprep-ed after fully updated to the latest ?
Before I upgrade to Windows 10 on my Windows 7 desktop I'd like to know whether or not there is a built in create a backup system image?
Once my Windows 10 upgrade is running properly and before adding in any new programs I wish to create a backup system image
--- I know I can use a 3rd party program and I am use to Macrium Reflect on my Windows 7 but I wish to know whether or not there is a built in create a backup system image utility
So far I have found which I will do while my Windows upgrade is in pristine condition
Recovery Drive - Create in Windows 10 [URL]
Windows 10 ISO Download [URL]
I'm using the line recimg -CreateImage C:Refreshimage or some variation of that and I get "recimg is not recognized as an internal or external command"
I'm using command prompt as an admin. I wanna refresh my pc with a custom refresh image so I can keep my programs. Does this mean windows 10 no longer has custom refresh images as a feature?
