Installation :: Dual Boot Windows With Linux?
Jan 31, 2016
how to be able to install both Linux and Windows 10 on my laptop's hard drive?So that when I restart my laptop I will be able to choose from either Windows 10 or Linux?
I did that once with Windows 7, and I remember I had 2 possibilities: Either to be able to choose through a Linux prompt at the startup, or through a Windows prompt. I tried both options. (It was either doing it via a Microsoft boot manager or via Linux boot manager or something like that, I just can't remember)
Edit: I remember there was some sort of Linux boot manager if you install Linux AFTER Windows, and if you then delete Linux completely, you had to repair Windows boot loader (Or it was the other way?i.e installing Windows AFTER Linux and then repairing Windows boot loader?)
View 9 Replies
Similar Messages:
Aug 18, 2015
Last week i upgraded my laptop from win 8.1 to win 10 pro, previously i was using kali linux and win 8.1 in the same laptop, but after the upgrade my laptop can no longer boot the linux os it keeps on saying os not found every time i try loading it up.. How to fix this without loosing a single data from my drives ...
View 1 Replies
Apr 14, 2016
Windows 10 currently installedUEFI (Legacy/BIOS is supported but I do not prefer using it as it may cause more problems in the future)1 Hard Disk Drive
Goals: Install Windows 7 on another partitionMaintain my current Windows 10 installationNOT have to switch to Legacy/BIOS mode
I found this: Windows 10 - Dual Boot with Windows 7 or Windows 8 But it assumes a Windows 7 installation and subsequently dual booting Windows 10 on it. What I would like is essentially the opposite.
View 7 Replies
Aug 24, 2015
So I've finally managed to install Windows 10 Pro x64 although with Windows 7 left over in dual boot. It created a "Windows.old" folder in the C: drive and Windows 7 doesn't boot anymore. How do I uninstall Windows 7 from my PC and will it affect any files?
View 7 Replies
Nov 17, 2015
I am dual booting Windows 10 and Windows 8.1. Each operating system is on a separate physical solid state drive. My default is Windows 10. The Windows 10 OS was installed on the drive that originally contained Windows 7 when I dual booted Windows 7 and Windows 8.1. I don't have drive partitions to deal with as each operating system is on a separate physical drive.
Now I would like to remove the dual boot by removing Windows 8.1, leaving just Windows 10. That will leave me with an unused SDD.
When I am in Windows 10, the default OS, the msconfig Boot section shows Windows 10 as the default, as it should. To remove the dual boot, can I just Delete Windows 8.1 from the Boot section of msconfig and make the setting permanent?
View 5 Replies
Sep 21, 2015
I just got my new MSI GE62 2QD that came installed with windows 10. Now I'm new-ish to computer systems but I used to have a dual boot of Windows 7 & Ubuntu using basic bios. Now I am lost with the new UEFI.
Here's my question: With my new pc using UEFI, how would I go about dual booting Windows 10 & Fedora 22 Without using grub. I wish to keep the default Windows boot loader.
View 1 Replies
Sep 3, 2015
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
View 2 Replies
Jan 27, 2016
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
View 3 Replies
Sep 24, 2015
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
View 3 Replies
Jun 15, 2015
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
View 9 Replies
Dec 19, 2015
I have win10 64 installed on my SSD and win10 32 bit on a HD. The SSD is GPT partitioned and the HD MBR. I can boot from the Windows boot loader in the BIOS into 64 bit windows on the SSD and, by selecting the appropriate HD in the BIOS into the 32 bit windows in the HD. I cannot figure out how to get that boot menu (either gui of text based) that I have read about in the forums. Do I need to convert the HD to GPT as well. Do I need to change anything to get this to work?
View 9 Replies
Mar 4, 2016
I have Windows 10 and 8.1 dual booted but I’m having trouble removing 8.1. 10 is on a Seagate 2TB HDD, and 10 is on a Samsung 2TB HDD. Both are SATA and my motherboard is BIOS. As long as the Samsung (8.1) is drive 0 and is boot’s first choice, all is well. I get the option to select either OS, and either one can be made default.
In attempting to remove 8.1 I have tried several things like making the Seagate drive O, removing power from the Samsung, swapping boot choice, but always fail and I continually get, “an operating system wasn’t found” no matter the disk or boot sequence, except the one above.
Included are jpg’s of disk management while in Windows 10, both disk and volume views. How to decouple 8.1?
View 14 Replies
Jan 3, 2016
I attempted to set up a dual boot configuration using my existing Win 7 Pro on a Samsung SSD drive, and a clean install of Win 10 Pro on a fresh Kingston SSD drive. I created bootable Windows 10 installation USB, reset the UEFI Bios boot order and proceeded with the install. Win 10 installed, however it would not recognize the Win 7 Pro drive. I checked the UEFI Bios again, and the Samsung SSD was no longer shown in the "Fixed Boot Order Priorities". However, it was listed under "Hard Drive BBS Priorities", and under "Boot Override". It also shows up in Win 7 in the drives listings.
My motherboard is a MSI Z97 Gaming 5, with Click Bios 4 v1.9.
I must also mention, my Samsung SSD with Win 7 Pro was set up not with UEFI but Legacy boot. This was my first mobo with UEFI, so I made that mistake due to my ignorance.
I reformatted the Kingston Win 10 drive. Rebooted, but got error message that boot device not found. I rebooted and hit F11 to get back into Bios. A popup box gave me a listing of bootable devices and the Samsung SSD appeared. Selected it and it booted into Win 7 no problem. I went back into the Bios, but the Samsung SSD still not listed. I shut down the system, unplugged the Kingston SSD, rebooted, went back into Bios, and the Samsung returned.
I then shut down the system, connected the Kingston into a different SATA port, rebooted the system, went back to Bios, and the Kingston remains unlisted in the "Fixed Boot Order Priorities" as before, but shows up in "Hard Drive BBS Priorities", and under "Boot Override". It also shows up in Win 7 in the drives listings. Remember that the Kingston is just formatted, no op system installed on it.
I set up the Win 10 install on the Kingston SSD as a legacy drive too. Another question I will ask is can you have one operating system on a legacy drive and one on a UEFI drive in the same PC?
View 9 Replies
Aug 4, 2015
I have Windows 7 and Windows 10 Enterprise Build 10240 set up in a dual boot configuration on the same hard drive. Windows 7 is the first partition on that drive and Windows 10 is the second. I have decided to keep Windows 10 as my main OS and want to remove Windows 7 and reclaim that space for the Windows 10 partition.
What is the easiest way to accomplish this without a complicated and long procedure? I have tried Easeus Partition Master 10.5, but am unable to format or delete this active partition. I tried to format and/or delete this through Windows 10 as well with no success.
View 5 Replies
Aug 2, 2015
I want to upgrade to Windows 10 to see how it works but... I also want to keep my Windows 7 in case anything goes wrong. So, how can I dual boot Win 10 with Win 7? It can be done when upgrading or I must download an .ISO file and burn it on a DVD? And I will also need some instructions about dual booting. By the way, I already backed up my files on my external hard disk if anything goes wrong.
View 1 Replies
Nov 27, 2015
I have Win 10 as the second of a dual boot with Vista. Each is on it's own hard drive. If I remove the Vista drive then win 10 won't boot as it is looking for winload.exe. Is there a way I can give it access to the winload.exe it is looking forand then uninstall Vista? If this cannot be done it isn't a big problem weaving Vista active, I just don't need it anymore.
View 1 Replies
Nov 16, 2015
I was running win 7 (64bit) pleasantly but decided to install Win10, did all the needed stuff for getting dual boot setup.Win10 booted fine, when selected from dual boot menu, but I have many issues on win10, Lenovo laptop is begging for mercy on win10 for many things, my android phone gets disconnected every few seconds if I use youtube, laptop becomes sluggish. USB3 will not install, which worked in win7 earlier.
Fed up with win10, even after disabling driver signature, making sure every driver is correct which I am installing, but this laptop hates win 10 as of now.Now if I choose to run win7, lappy reboots and thats a LOOP. my win7 installation is shown in Drive letter E: while windows 10 is shown in C: What would be the safest way of Re-installating win 7 on E: without loosing the following the crappy win 10 of c:/ dual mode option on win 7 +10
What I want is to run win7 setup which has SP1 integrated and still be able to boot in win10 if I needed later.I have activation keys for both provided by my office which is based on volume licensing.
View 3 Replies
Jan 12, 2016
I have a PC with win 10 x64 installed. It is a new PC with UEFI firmware and secure boot enabled, though I can disabled it very easily.
I want to installed Win 7 x86 (32bit) on a second hard drive and have it dual-boot config with the current Win 10. I know I have to disable secure boot for installing 32 bit, but Im concerned about the process of installing Win 7 AFTER the already installed Win 10.
How can I go about doing this without losing access to my Win 10? I need to install win 7 for compatibility reasons.
View 9 Replies
Oct 13, 2015
I am dual booting with Win7. I have not used 7 in a few months. I want to know if there is a way to delete and merge the partition that Win7 is on. Also I want to know how to get rid of the dual boot screen and just go with the reg Win10 boot screen.
View 5 Replies
Aug 5, 2015
I have a Acer Aspire XC-603G desktop upgraded to Windows 10 64bit Home (no Hyper-V). I want to run 16 bit software that is incompatible. I would like to dual boot with Vista x86 (gave away my XP). From what I understand, you must load the older version first due to Windows 10's MBR. Can I backup/clone Windows 10 partition, reformat and repartition the HDD, install Vista in first partition, then restore Windows 10 to the second partition? I'm thinking I'll need a fresh Windows 10 install. Or is there a simpler way? The only other way I see is to buy the Pro upgrade to get Hyper-V. And if I did the latter would it really be compatible with my Windows 95 16bit ImageReader Scanner software?
View 2 Replies
Feb 10, 2016
I recently (clean) installed Windows 10 on a new SSD. Windows 7 resides on my first drive.
1) I first set the USB to boot from;
2) Began to install Windows 10;
3) First snare: upon first reboot, after removing the USB, the system just started my old Windows 7 (!). (I expected a dual boot menu there.)
4) Rebooted, set SSD to first disk, and finished installing Windows 10;
5); Tried to add boot menu later (both in Windows 7 and Windows 10), using the Advanced System Settings, to no avail: neither OS sees another boot partition.
View 7 Replies
Jul 24, 2015
Can I have both a GPT and MBR formatted drives on a dual boot system?
I would like to retain my Win 7 installation as is with MBR formatted hard drive, and after the Win 8.1 to Win 10 upgrade, do a clean Win 10 install with GPT (UEFI) format.
View 8 Replies
Jul 30, 2015
I have a dual boot 7 and 8.1, which are on separate drives. I'd like to keep 7 and install 10 over 8.1, I have downloaded 10 on usb. My question is do I have to disconnect the windows 7 drive before I try to install 10?.
View 1 Replies
Aug 17, 2015
I have the Windows 10 Pro ISO with a Windows 10 key. (from MSDN)
I want to install Windows 10 as dual boot with Windows 8.1. Both are x64.
Is it possible to install Windows 10 from the ISO? I know you can upgrade that way. But I want to do a clean install AND install alongside Windows 8.1.
View 9 Replies
Sep 21, 2015
I just got my new MSI GE62 2QD that came installed with windows 10. Now I'm new-ish to computer systems but I used to have a dual boot of Windows 7 & Ubuntu using basic bios. Now I am lost with the new UEFI.
Here's my question: With my new pc using UEFI, how would I go about dual booting Windows 10 & Fedora 22 Without using grub. I wish to keep the default Windows boot loader.
View 2 Replies
Aug 3, 2015
I have both windows 7 and windows 10 installed on different ssd's but how can I get so I can pick what os to start when I start the computer? Now I have to go to bios and put as boot drive to start OS I want.
View 1 Replies
