Just getting to grips with W10 and noticed that dual booting can be set up in System Configuration-boot. This was the case in XP, I think or was a previous version. Bit late now as I have easybcd on W7 drive. Before you ask I have never had a successful install where W10 finds W7 and displays that fancy box on start up.
View 8 RepliesI have dual booting setup on my pc my main system and my development system but to get the development system my computer first boots the main one then asks me which os i would if the main one it goes right to as it already loaded but if it is the development system it will restart and load that, so my pc has to boot twice. Is there a way from the main system some how i can restart straight to the other one. Both os are windows.
View 1 RepliesI've decided that I would like to dual boot Windows 10 TP (I know im late to the game)
Now ive done dual booting before, but I was wondering if its any different, as my system has change to include a SSD which just has windows 7 and a HDD with my files.
If I just partition my HDD to a smaller size and install windows 10 on the other half of that partition will that work and not affect windows 7
I've just built my desktop and I'm trying to dual boot Windows 10 and Ubuntu 15.04.
I've already partitioned my hard drive, and installed Windows 10 and Ubuntu 15.04, but I'm trying to get to a place where I can choose what OS to start whenever I turn on my computer.
At the moment, I can run both Windows 10 and Ubuntu 15.04 if I go into the BIOS and rearrange my boot priorities, but that's just a huge hassle. Is there a convenient way to choose at startup, similar to how Windows 8 had this?
I have the ESD for Windows 10 built 10240 . I need to clean install it on a different drive and dual boot it with Windows 8.1. Can I simply boot with the 10 ISO (in UEFI boot) and clean install it on a different drive?
Would I then be able to dual boot it with my activated 8.1 copy?
I have Windows 10 installed on HD1 (Samsung) and working will. I had a second HD2 (WD) with Win7 installed for a dual boot operation. For some reason, I could never successfully boot into Win7. Out of frustration I decided to format the Win7 drive and start over.
The problem now is I cannot install Win7 on the HD2 drive. When I choose F12 on boot up and select the WD disk, a screen appears saying "Windows Boot Manager" It instructs me to insert my Win7 install disk an reboot.
Next steps:
I insert the Win7 install disk and reboot using F12 to select the WD disk. The "Windows Boot Manager" screen appears again with the same instructions as above! If I reboot again and do nothing, the system will boot to Windows 10.
My question, how to install Win7 on the WD disk and then setup a dual boot operation?
I want to dual boot windows 7 and windows 10 on 2 separate hard drives.
View 9 RepliesI have 2 Windows 10 (7 Upgrades) Installed,
...I would like to set them up, so I can Dual Boot them, without re-installing them.
I have upgraded from Win8.1... It seems all is workin +10, but just a few days ago I see this thing. I set the screensaver to 10 minutes delay, I choosse the 3D animation and bingo . nice like in y old Win 8.1. The problem is simple. When I shutoff my pc and start again the screensaver settings change again to 1 minute( default) and no 3D sacreensavere any more !! I must set again to X minutes, select the animation , apply and save and this over and over . Never problems before with my Win 8.1. I use the same hardware and apps. Everything is the same on my PC than before.
View 10 RepliesOn the bottom of windows 7 there is a icon to upgrade to windows 10. However, is there/will there be a way to upgrade to windows 10 and keep windows 7 in a dual boot configuration.
View 1 RepliesMy wife purchased a Dell 8700 XPS with i7 4790 processor,16GB ram. and Nvidia GeForce GTX 745 4GB and a 2 terabyte hard drive. She also purchased a Kingston HyperX 120 GB SSD. I used a popular software to migrated Windows 8.1 Home to the SSD from the HDD. This seemed to work well but on booting up the system the HDD boots unless I go into the bios and select the SSD in SATA 2 under the DVD reader/burner and select a {boot manager on Disk 1{ which was installed by migration software. I had hoped to format the HDD and use as data disk afterwards.
I noted that some threads mention I should have disconnected HDD when booting from SSD first time which I did not do.It also appears that the OEM partition is still on the HDD. I believe a clean install is required. Will this also remove the > boot manager on disk 1> line in the bios.
I have two systems.System 1 is a desktop running W7 Premium SP1. I did clean install of W10 from iso on separate partition. W10 will not activate using W7 numbers. I suspect that is because I moved W7 to an SSD 6 mos. ago and W10 expects the old HDD. BTW, installed W10 to partition on the SSD
System 2 is dual boot laptop (Dell Inspiron) with W7 SP1 and W8.1. I want to keep W7, and I could try W10 install either by upgrading 8.1 or clean install to the 8.1 partition. Reccomendations? I don't want to risk losing the W7. I do have disk image backups of both W7 and W8.1.
I created a dual boot system quite some time ago and all was well until.RTM partition was completely up-to-date. I had recently updated to Windows 10 Build 10251 on the Insider partition.I turned the machine off on Sunday January 31, left town, and returned Saturday February 6. All was well with the dual boot when I turned the system off before leaving. When I turned the system on last night, it booted directly into the Insider Partition. There seems to be no option to boot into the RTM partition.
View 9 RepliesI have a dual boot system in the following configuration:
HDD-0 = Win7 OS, HDD-1 = Win7 OS, WinXP OS. I have successfully booted into each of these operating systems - and the Win7 OS on HDD-1 is an exact clone of the primary OS on HDD-0.
I just upgraded the Win7 OS on HDD-0 to Windows 10 using the "Get Windows 10" process. I now get the new blue Boot Manger screen with all three OS's listed and I can successfully boot into Windows 10 and Windows XP. But I cannot boot into the Win7 OS on HDD-1 (which I could before the Windows 10 upgrade). How the upgrade even knew about the other copy of Windows 7, since it was not active and lives on another HDD is beyond me.
One strange thing - if I do a cold startup (power on) I get the new Boot Manger screen. But if I do a Restart from Windows 10, I get the old, black & white boot manger screen - and it does list all three OS's correctly, too.
The error message I get when trying to open (boot) the Windows 7 OS is: "LogonUI.exc - Entry point not found. RtlReleasePath could not be located in the ntdll.dll" And, like others, I now get the black screen with "Windows 7, Build 7601 This copy of Windows is not genuine (but it was yesterday before the Windows 10 upgrade on the other HDD).
And like others, I can start the Crtl+Alt+Del to get the screen with users, Task Manger, etc. And, I can run all my applications by manually starting them in a New Task and browsing to the exe file - like Firefox.exe or Word.exe So, it looks like Windows 7 started and may be running. I just can't get into it.
I think both issues, the LogOn and the "Not Genuine" are both related to the Entry Point no located in the ntdll.dll.
At this point I really don't want to reload Windows 7 since it appears to be running and all the apps can be run manually.
All this happened after the upgrade of the other Win7 on HDD-0.
Okay, I have Windows 10, and Macbook. My PC, have 2 hard disks, one is of 500 GB ( Seagate ) and one is 3 TB Western Digital (Black).
Machine is loaded with:
CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler
Motherboard: Asus MAXIMUS VII HERO ATX LGA1150 Motherboard
Memory: Corsair Vengeance Pro 8GB (2 x 4GB) DDR3-1866 Memory
Storage: Seagate Barracuda 500GB 3.5" 7200RPM Internal Hard Drive
Storage: Western Digital Caviar Black 3 TB 3.5" 7200RPM Internal Hard Drive
Video Card: Asus GeForce GTX 770 2GB DirectCU II Video Card
I am planning to Install Mac OS X on 500 GB one and keep Windows 10 on 3 TB one. So is it okay if I will just remove the 3 TB Hard disk, and install Mac OS X on it ? 500 GB hard disk have files of Windows 8.1 already. But it is not my primary hard disk.
At some point in the future I aim to upgrade from Windows 7 to Windows 10, but I'd like to keep Windows 7 on a dual boot or something similar (if possible) for convenience and in case of compatibility issues. However I also want to get a new motherboard and CPU, and from my limited understanding of operating systems that would cause problems for my OS and stored data and such. So I have decided to ask some questions.
1. Is a dual boot with Windows 10 and earlier versions of Windows actually possible, and how would I go about setting it up?
2. Would it be possible to dual boot the OS's across separate SSDs?
3. Is it possible to synchronise the desktop across both OS's?
4. If I have to do so, would deactivating and reinstalling a copy of Windows 7 as simple as following most of the steps in this guide?
5. If I have to deactivate and do a clean install of Windows 7, would it wipe all the files on that drive?
6. Would reinstalling Windows 7 be as simple as installing as normal and then entering my product key with no complications?
7. Is there anything else I should know or do before I start uninstalling and clean installing stuff?
Whenever booting my pc I get a "operating system wasn't found error". I've checked to make sure my hard drive was set to the boot drive and I've tried reinstalling but that doesn't work either.
View 1 RepliesIn my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
My Windows 10 home-64b works flawlessly, but I've realized that the system configuration stubbornly continues to initiate under "Selective Startup" instead of "Normal Startup" which makes me wonder which "services" cannot be loaded. I've tried to change it but it continues to be the same "selective Startup". This makes me uncomfortable cause possible future problems.
View 8 RepliesI have the very latest Build of Windows 10 Pro, but recently I have experienced problems with my PC’s general performance – I therefore decided to Run msconfig to then uncheck some 3rd party programs under services within the System Configuration Hiding All window services first.
What is happening is that when I disable all and then go about checking the 3rd party progs one by one, the 1st attempt to tick one of the programmes the system config freezes. I have to then reboot the PC but the same thing happens if I try and attempt to do this again.
if I try the same thing but booting within Safe mode the PC does not freeze – so my question is .. can this action only be carried out in Safe mode ??
I have searched the internet for a few days now but cannot come up with an answer to this .. if you are supposed to be able to do this under normal windows start up then I have a big problem with my OS but if this is a procedure that can only be carried out within safe mode then all is well.
Attached Files : Pic.jpg 61.71KB
I can't make it Windows 10....
View 6 RepliesWhen I try to install Windows 10 update, the installation freezes at 91% Setting configuration. (67% overall). I do not get any error message. I have tried various ways, Clean boot, Media creation tool etc. I have left the computer 4 hours in case it was not frozen, even though I could not detect any HDD activity.
The machine does not revert back to windows 7 as it says it is doing, but instead I get a black scree telling me status 0xC000000e . "Info boot selection failed because a required device is inaccessible." Looking this up it would seem to indicate the winload exe is missing or corrupt. I do not have any problem booting up my machine, normally, but was wondering, if it could be that, there is something wrong with my MBR and that is why, perhaps ( I am clutching at straws) windows 10 will not install.
The windows rescue disk, does not get me back, as when asking for a repair, there is no C drive showing, so I revert to my good old Acronis software. Without which I would be in big trouble.
First of all i was just cleaning my pc, ran a disk cleanup. I came across this program called driver booster from Clean, Optimize, Speed Up and Secure PC - Freeware Download - IObit, along with some of there other programs from it, i ran a norton scan, the driver booster, there defragging program and a full clean up program they offered. It was getting pretty late and the defrag program was on 40% and the driver booster kept prompting me to reboot after it had installed some drivers. I turned my pc off by accident and decided to go a bed. I woke up with the error bad_system_config_info, i had this problem before so didnt panic, i restarted, did startup repair which did not work, then booted up into safe mode which did not work, i tried some bootrec commands that some people over on reddit told a guy with the same error to do.
No fix, bootrec scannow and scanos did not find any windows installations which was odd and then i decided it was time to just give up and reset however it got to 30-40% and stopped, it said it could not reset and ran into a problem. I burned a windows10.iso to a disc and booted the pc with it and tried to reset with that, still stops at 30-40%. So im now here with little to no hope on getting my pc to boot and im posting this to hopefully get answers as my problem is very different from any others on reddit.
What im thinking is either it was the drivers that the program installed. The cleanup program also did a registry clean up which may have screwed things up in the BCD which ive heard is a cause of this error.
P.S i have windows 10, maker of the pc is zoostorm.
I had Win7 and did the free upgrade to Win10.
Before the upgrade I was smart enough to do a complete system image of Win7.
1. If I disconnect the Drive that Win10 is installed on and reinstall Win7 on a different drive, can I use the system image to recover Win7 back to the state it was before the upgrade?
2. Reconnect the Win10 drive and and boot up the system, will system ask which OS I want to boot up with at that point or will there be a conflict?
It's not that I don't like Win10 given I just upgraded on Thursday, September 17th and I need time to fully go thur all the operations and functions. I want to get a reasonable working knowledge and understanding of the Win7 OS, till I do I want the ability to keep and use Win7.
It took me quite some time to migrate from XP Pro to Win7 because I created a dual boot system for that purpose and I do not want to be FORCED cold turkey to switch to a new OS till I am ready to do so.
I've just bought a little Gigabyte Brix 1900, but when installing Windows 10 I got an error saying:
"Windows could not update the computer's boot configuration. Installation cannot proceed"
It turns out that the unit needs a BIOS update to the latest version before Windows 10 can be installed. I just wanted to post this information here, as I imagine this will be a frustration to many others!
With a few workarounds, you can update the BIOS from within the Repair > Tools > Command Prompt options. Just be sure to download the DOS BIOS zip from the gigabyte website (which won't run properly, but contains the ROM), plus the Windows BIOS tool which you can then run from the command prompt.
I recently upgraded my windows 7 to windows 10. I have had everything activate properly. I then decided to do a fresh install of windows 10. I loaded boot media on my pc and everything went fine. Now with the fresh install of windows 10, at boot up, I get the option to choose windows 10 or windows 7. How to I change this so it ALWAYS defaults and boots windows 10? Considering I wiped my hard drive clean windows 7 shouldn't even be an option.
View 4 Replies