Installation :: Error 0xc0000135 - Windows Not Starting Loop
Jan 22, 2016
my computer which is a HP Envy 700, operating on windows 10. I think it's 64 bit but I'm not 100% sure.Everything has been fine until I switched it on this morning. I switched it on then went off somewhere, came back to see it was running a disc check and then I got a blue screen saying my computer had ran in to a problem and needed to restart.
It goes into a loop, of not being able to start up. It won't even load in safe mode. I've tried a system restore but the only date it will reset to is the day before. This fails, it says the restore file is damaged or something.
My housemate looked at it, only had him for an hr before he had to go out but he pressed a key as the computer was starting up, and set something so that the computer would start up using(?) a USB, on this USB he put an installation file for windows 10. He tried to run a repair off this USB and tried to run the repair (which would not delete my files). Annoyingly this didn't work, I've lost the page, but it said in order to do this, youd have to run windows normally. Which we can't do.He says the last thing he can try when he gets back is to install Linux and save the files I want to keep using that, and then format the computer. It didn't sound like he thought that would work though.
View 4 Replies
Similar Messages:
Aug 17, 2015
I want to do a clean install of Windows 10.But i have a problem,after the language screen when i press "install now" the cursor turns into a hourglass and the setup hangs.I still can move the cursor but the setup won't continue.
View 1 Replies
May 30, 2015
Win 7 user here, wanting to dual boot with Windows 10 preview (on a different partition).
So I made a Win 10 usb boot disc, and it installed it fine. Played around with the new Windows for a few mins, whilst it downloaded an update, and after installing the update, it said it needs to restart, naturally. So I did.
However, since then, the PC keeps restarting, showing a Windows 10 logo, and below that is the text, "preparing automatic repair". Then it just resets, and goes in this endless loop.
Why is this happening, and how do I resolve it?
View 9 Replies
Oct 20, 2015
i was updating my windows 7 to 10. it was updating smoothly but then my father hard reset the laptop and now my laptop is stuck, it goes to the booting menu. then the "windows error recovery" screen, and when i choose "start windows normally" it shows the logo and says "starting windows" and then it just restarts. how do i solve this? this loop has been going on for the last 2 hours.
View 1 Replies
Sep 22, 2015
Many BSOD's happened while I'm developing and testing a game. I'm using Intellij IDEA community edition. The game is using lwjgl 3, which in turn uses GLFW 3 and OpenGL. The BSOD always happened, while I was editing one of the source files, and quickly launched the game from the IDE. The game is configured to start in fullscreen. BSOD never happened when it launched in windowed mode.
The error code seems to be 0xD1, DRIVER_IRQL_NOT_LESS_OR_EQUAL
View 8 Replies
Sep 16, 2015
My problem is exactly as it says in the title, Cortana isn't starting up with windows 10, I can't use the speech or search functionality. The bar is still there, but I can't type anything into it, I click on the microphone icon and nothing happens, ''hey Cortana'' isn't working at all.
View 1 Replies
Mar 5, 2016
I recently decided to build my own computer, however to my horror, Windows 10 is still not working and has caused my computer to randomly cut to black screen, not turn on when the power button is pressed and to restart itself only to cut out 5-10 seconds after powering on.
View 4 Replies
Aug 12, 2015
Valid windows 7, sit back and relax message on the install, then blue screen of death and error loop, No support from Microsoft. Off to local computer store to see if they can get this fixed or off of my PC..... way to go Bill - no wonder the upgrade was free.
View 1 Replies
Oct 18, 2015
I installed Windows 10 on my Win 7 HP Envy 4 laptop recently. A week later, the computer began running very slowly and the start menu and notification center stopped working.
Finally, I decided to do a clean reinstall of Windows 10, using the media creation tool and a USB drive. I was able to get the installation started fine, but after 20 minutes it hung on "the computer restarted unexpectedly or encountered an unexpected error." Attempts to hit "OK" and start again bring up the same message and the same circling dots. I've tried the regedit fix described on various sites, but regedit also hangs before I'm able to exit. Now the computer hangs on a screen asking for the Win 10 product key. No way to enter it even if I had it.
I'm at a loss on what to do now. The computer won't boot to safe mode. I can access the BIOS screen, but only the two first keys are responsive; trying to change boot order, for example, just results in the same reinstall error message.
Have I hopelessly bricked this machine? I'm not worried about losing files, but I'd sure like to get this thing running again.
View 1 Replies
Nov 24, 2015
Blue screen and error 0xc000021a and the continuous repair loop
DESKTOP-9LUS32E-Mon_11_23_2015_225843_17.zip
systeminfo.txt
View 9 Replies
Jan 7, 2016
Upgraded to Windows 10. Was working fine now NTFS_FILE_SYSTEM error boot loop. How do I get a repair disc to repair windows?
View 1 Replies
Feb 10, 2016
I recently purchased an intel NUC6i5SYH kit PC and fitted it with the following RAM and HDD.
Samsung 500GB 850 EVO M.2 SSD: Amazon.co.uk: Computers Accessories
HyperX Impact 16 GB 2133 MHz DDR4 SODIMM Memory Kit (2 x 8 GB): Amazon.co.uk: Computers Accessories
I installed a copy of windows 8 that I owned and then upgraded it to windows 10. It was working fine for a couple of weeks, and suddenly it had and error and is stuck rebooting itself with a blue screen error.
The error appears to be different every time but the ones I have seen repeated are "WHEA_UNCORRECTABLE_ERROR" and "MACHINE_CHECK_EXCEPTION".
I can get into the BIOS and that's about it. I can't find a way to boot into safe mode and when I try and install a fresh copy of windows 10 via USB created from microsoft i still get a blue screen error after a couple of seconds.
View 1 Replies
Aug 13, 2015
I recently upgraded to Windows 10 without a problem, but after a while I thought; why not do a clean install? I went ahead and tried to perform a clean install from the windows 10 settings, and chose all drives, and a quick reset.
It then started the process, after which it crashed with a BSOD telling me something went wrong and that it would restart. After that it kept restarting, sometimes with a BSOD, sometimes just freezing on the windows 10 logo. There were different BSOD errors each time it would crash, I can't remember all of them.
Some of them were along the lines of a driver stack overrun, some were telling me system32/winload didn't exist.
We tried a system restore from USB, but there was no difference. We tried going into the BIOS menu, sometimes it worked, sometimes it froze, and we made sure that the USB would be the first the PC would boot from. Still no difference.
At this point the PC just froze on the windows logo, still trying to initialize the system reset I think. I unplugged the drives and plugged them into my laptop to check what was wrong, and both drives were wiped, with nothing left, no hidden files.
Only with both drives unplugged, the PC would give me something different, an error saying that there is no operating system, which is obvious, so I don't think it's the PC, but windows that is generating this problem.
I tried booting from USB multiple times, with a system restore on it, a windows 10 installation on it, and a windows 8.1 installation on it, since that is what my PC started with.
View 3 Replies
Aug 10, 2015
I recently tried to fresh install Windows 10. I ended up getting stuck in a install loop with the error INCOMPATIBLE_BOOT_DEVICE so I tried to use a USB instead. This resulted in an error saying my USB was formatted in NTFS instead of Fats32 (even though I had just formatted it to be fats32).
My first question would be how to fix this error? Now, while trying to download Windows, I accidentally deleted my Linux partition (woops). My second question is to just delete all partitions on my hard drive and restart from scratch? I'm attempting this on a Lenovo Ideapad y510p.
View 1 Replies
Oct 19, 2015
Just when I was happy with my installation I error checked my main C: drive with is a Samsung SSD, Windows reported that it had found some errors and it needed to be rebooted to correct them. I rebooted the PC and the check disk did it's repairs and it booted back in to Windows. I noticed straight away that the start menu had stopped working and when I opened Windows Explorer or did anything within it (like right click properties) or any settings windows like control panel it would take for ever. Opening programs like Internet Explorer work fine.
I have tried System Restoring to before I did the drive repair and sfc /scannow and Dism/Online/Cleanup-Image /RestoreHealth but I still have the problems. The SFC found errors and corrected them but still no Start Menu.
I do have a Trueimage backup from Last Friday which I will have to use if I cannot sort this out. Yesterday due to a on going occasional BSD I had fully uninstalled my Nvidia Geforce Video drivers using a utility that was recommended to me on this forum, I then reinstalled the drivers and it had been fine up until I did the Scan for errors so I don't think it's nothing to do with that.
View 9 Replies
Aug 9, 2015
I am using windows 10 from 1st of august by upgrading from win7ultimate,thought of clean install at a later time. After a day,the system stuttered while watching videos through vlc,or at youtube(maybe by just by watching).
After some days the desktop seemed to be refreshing again and again at startup, last night after refreshing loop, pc restarted itself,attempting automatic repair and restarts or boots again and again and error shows that [system thread exception not handled] and is on a boot loop.
I tried to use through installaton by usb for repair or clean install but the same problem is seen there too, what to do?
View 7 Replies
Aug 10, 2015
I have tried to download and install Windows 10 quite a few times. It freezes at the point where it has completed 75% of the installation and I think it is just about to 'Restart' once again to go into the final 'Settings' phase. The only way to get out of this that I've found is to power the machine off and then back on again, the system tries to recover the installation and then the previous version of Windows is restored. The unknown error C1900101-40017 is reported in Windows Update on each occasion.
View 20 Replies
Aug 4, 2015
I have tried to upgrade from win7 to win10 after copying the files and the system restarts, I will get the error 0xc000000f. I have both win7 and win10 disks and the automatic repair would not work.
Apparently this has to to with some bios settings, I have tried to follow the guide but I do not have all the options to described in the guide below.
[Solved] Error Code 0xc000000f Windows 8: A Required device isn’t connected or can’t be accessed
Specs:
Processor (CPU)Intel Core i7 Quad Core Mobile Processor i7-3630QM (2.40GHz) 6MB
Memory (RAM)8GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (2 x 4GB)
Graphics CardNVIDIA GeForce GTX 660M - 2.0GB DDR5 Video RAM - DirectX 11
2nd Graphics CardNONE
Memory - Hard Disk120GB KINGSTON V300 SSD, SATA 6 Gb (450MB/R, 450MB/W)
2nd Hard Disk1TB WD SCORPIO BLUE WD10JPVT, SATA 3 Gb/s, 8MB CACHE (5400 rpm)
View 9 Replies
Jul 31, 2015
I tried to update my Windows 8.1 installation on my Thinkpad T61p to Windows 10. It went smoothly until it finished copying the files (75% complete). It is now rebooting in an endless loop (reboot -> Windows logo with spinning circle -> black screen -> Windows logo with spinning circle -> 75% complete message -> reboot) and I don't know what is causing the problem. I have installed the latest BIOS and tried various changes to BIOS settings with no effect. Does the installer write any kind of diagnostic log that would tell me the reason for the reboot loop?
View 7 Replies
Oct 30, 2015
I have a booting problem with my Windows 10, after having it for two months. Few days ago after turning my PC on, I had a message Starting Windows Repair, after some time it shows me the same screen with text - Diagnosing your PC. Then after having a black background, a light blue screen appears with error 'Your PC did not start correctly', it gives me options to restart it again or to open on Advanced options. There are so many of them, I tried all except the one with Restarting PC and deleting files, all the others, including Safe Mode won't work. I am stuck now here and can't use my PC.
View 9 Replies
Jan 18, 2016
I have Windows 7 Home Premium (64-bit).
I finally decided to upgrade to Windows 10 yesterday (1/17/2016). It downloaded roughly 5.76 GB into a hidden folder : "C:$Windows.~BT"
Then it prompted me to restart my computer, so I did. Once restarted, nothing changed.
So I went into Windows Update, and it just tells me: "Restart your computer to install important updates" and it has a "Restart now" button. I've restarted roughly 40 times or so in the last 2 days after trying various fixes, and it doesn't make a difference.
I checked the update history, and there are a whole bunch of Pending and Successful updates with a "Date Installed" date of 1/15/2016. Nothing more recent either.
View 2 Replies
Aug 17, 2015
just got new pc and windows 10 with it when i install the windows and everything finishes and restarts. The pc just boots up back to the installation page. Stuck in loop the dam windows wont start up.
View 1 Replies
Aug 3, 2015
When downgrading to windows 7 from windows 10 computer goes into a infinite loop then hours later my computer goes into system repair. I have a hp compaq 6910p 32 gb 2000 MHz thats from 2009 with no disk. My pc will not start up every time I go to start windows normally i get the bdos, everytime i try to go into safe mode the Bdos comes up still. I tried some of the methods I've seen on this website all day, none of them worked.
View 1 Replies
Aug 26, 2015
I recently upgraded my Windows 7 PC to Windows 10 using Windows Update. The whole process was smooth. I never really ran into any problem. Because the PC is so relatively old, I decided to delete all files and reinstall windows 10 using the windows 10 feature 'Reset This PC' to start fresh and theoretically faster. During the reset when Windows is installing my drivers, I noticed that the screen is plain black - no mouse pointer and the amount of reset finished(in percentage) is not also shown. The screen is just plain black. I am pretty sure that both the monitor and CPU is on. I've tried waiting for atleast an hour. I turned my pc's monitor on and off - nothing happened. So I have to resort to hard reset/reboot coz I cannot really see anything on my screen.
When I turned the power of the CPU back, it gave me the error 'The computer restarted unexpectedly or encountered an unexpected error. To install Windows, click ok to restart the computer and restart the installation'. I pressed OK but after restarting, it gave me the same error over and over again. I tried the solution in this website ( during installation of windows | HERESJAKEN), and it got rid of the error. However, I am stuck yet again in a loop that continues to just restart my PC when they reach the screen that tells you how much of the reset is finished, in my case, im stuck at 64% of the reset. That screen is shown for like merely 2 seconds, then the PC will just restart again, then show the "Reset progress screen" again for 2 seconds then PC will just restart again, over and over. I think the only solution is to start the reset of the PC again, but I dont know how.
View 1 Replies
Jul 4, 2015
Have just installed 10 on a spare drive and installed that drive into my Sandy Bridge and the machine is now going through an endless loop of start up.
I can hear it make some sort of noise as if something wants to go and I have again tried the machine with the old 7 install drive and the same thing is happening.
The other thing is I am not getting a RAM beep or the BIOS to come up on the Gigabyte board (DEL) have jumpered the reset pins for the BIOS but still no BIOS or for that matter any graphics.
View 1 Replies
Aug 11, 2015
I have a acer aspire es1 laptop and i upgraded from 8.1 to 10 and when i switch on my computer from cold boot it loads up but when at the login screen it gives the spinning wheel saying hibernating above it but will not go any further.
View 2 Replies
