When I got on my computer this morning, I was notified of updates. I used the restart button on the notification page thinking this would start downloading the updates. However, the computer has been stuck in Restart for 3 hours. Microsoft... can you access my IP and stop this loop? Is there anything I can do to stop this loop?
Last night I was watching a dvd on my desktop when all of a sudden a blue screen came up with a frowning face and said that "Your computer ran into a problem and needs to restart, its collecting info and will restart." It happened quickly so I didn't see what the error was but now my PC is stuck in a loop where it restarts and loads into an empty blue screen. It stays on that blue screen for a minute or so and then restarts again. I tried going into my BIOS or starting in safe mode but my PC won't go into them.
On start up I get the computer needs to restart and then goes into the loop of restarting from a blue screen, I can get F2 which is the Bios screen but thats all, I can see reboot on this but do not have anything to reboot with as I upgraded from win 7.
I recently upgraded my Windows 7 PC to Windows 10 using Windows Update. The whole process was smooth. I never really ran into any problem. Because the PC is so relatively old, I decided to delete all files and reinstall windows 10 using the windows 10 feature 'Reset This PC' to start fresh and theoretically faster. During the reset when Windows is installing my drivers, I noticed that the screen is plain black - no mouse pointer and the amount of reset finished(in percentage) is not also shown. The screen is just plain black. I am pretty sure that both the monitor and CPU is on. I've tried waiting for atleast an hour. I turned my pc's monitor on and off - nothing happened. So I have to resort to hard reset/reboot coz I cannot really see anything on my screen.
When I turned the power of the CPU back, it gave me the error 'The computer restarted unexpectedly or encountered an unexpected error. To install Windows, click ok to restart the computer and restart the installation'. I pressed OK but after restarting, it gave me the same error over and over again. I tried the solution in this website ( during installation of windows | HERESJAKEN), and it got rid of the error. However, I am stuck yet again in a loop that continues to just restart my PC when they reach the screen that tells you how much of the reset is finished, in my case, im stuck at 64% of the reset. That screen is shown for like merely 2 seconds, then the PC will just restart again, then show the "Reset progress screen" again for 2 seconds then PC will just restart again, over and over. I think the only solution is to start the reset of the PC again, but I dont know how.
My installation is stuck in a reset loop. The Win 10 Ready to Install came up, so I clicked Start and it rebooted, back to the login screen, and then Windows Update came up saying it needed to Restart Now. After a couple of minutes the Win 10 Ready screen comes up again. I've rebooted about 20 times and get to the same point every time.
Earlier this afternoon I decided to reset Windows 10 as I had a problem with BSOD BAD_POOL_CALLING over and over again. I booted in Safe Mode, went to Advanced Options and so on. It wasn't a factory-new reset, just the one that removes all files, app data, etc. I left it for a while and came back to find it hadn't worked; there was an error message that read 'There was a problem whilst restarting your PC'. I tried again and the error message appeared again. Because of this, I decided to exit and continue to Windows 10 and see if it had done anything.
Now, when I try to boot my PC up, the circle that usually rotates on the 'Zoostorm' screen when loading doesn't appear. The PC then reboots and tries again, again and again, but with no success. I have tried turning off and on, and even unplugging everything, however nothing seems to work. My PC is now stuck in a continuous reboot loop and won't load. Unfortunately, I can't press F8 or Shift + F8 when booting to start Safe Mode. I have never made a recovery drive for Windows 10 and I don't think my computer came with a repair disk.
Recently, I purchased a Microsoft Surface 3. From the day I got the tablet, it has been having freezing problems that seem to progressively get worse and worse. Today, I couldn't go two minutes on my Surface without having to restart it.
I would prefer to return the product, but since I can't, I decided to first try to update it. The update kept getting frozen, encountered an error or would just be stuck at 0%.
After exhausting all the other options I knew off, I quickly moved what little files that I had off of my tablet and then performed a factory reset.
The factory reset got stuck at 99%. And I don't mean that it just was there for a few hours--no, the screen literally froze. So I restarted the tablet again, which brought me to a screen that says, "Choose an Operating System" that has two options. Both options are "Windows 10 on volume 3." There seems to be no distinction between them. But the problem is that if I click one, and it doesn't matter which one, or if I just let the tablet automatically run on one of them, it loads for a few seconds with the "Surface" screen, and then immediately loops back to the same "Choose an Operating System."
I ran the window 10 installation last night on my Lenovo Y50 laptop. Today it is stuck in an endless loop of trying to Preparing Automatic Repair, diagnosing PCs and wanting to restart. I can't get past the limited choice of options to actually do anything useful. I just want to get rid of the thing and go back to Window 8. I am to computer stupid to know how do this. I only recently got the laptop. I don't have a recovery disk.
I'm using windows 8.1 on ASUS N series laptop 64 bit, my windows got problem and after i updated to windows 10 and try to factory reset it, it got to 99% and say that the window has a problem, it cannot reset my windows and stuck in restart loops.
I've spam F9 and try to reset the pc again, but the problem still persist and i even try to solve it with the advanced options ( startup repair, system restore, system image recovery setting - all end up with this pc require administration account, and somehow my account is lost due to reset earlier) i even try to reinstall windows with CD but it doesn't detected.
It seems like i lost both my windows 8 and windows 10 on the laptop.
I did an in place upgrade of Windows 7 using a USB key made with the tool Microsoft put out. I chose not to download updates during the install, so after the initial boot, Windows started downloading updates. I reinstalled the latest nVidia drivers/Geforce Experience as well. During the next boot cycle, at some point explorer crashed and the screen flashed black, at which point that process repeats forever. I let it go over an hour just to see what would happen. URL...
The suggestion on that site is to disable 2 Windows Services: Problem Reports and Solution Control Panel Support and Windows Error Report Service. This didn't work for me, though it appears to have worked for many others.The culprit for me was Apple's iCloud service. As the taskbar was being populated, this task would load and throw an error message about logging in, at which point the crash loop began. Uninstalling this program solved the issue for me.
Lenovo ThinkCentre, 32bit was running fine on Windows 7 Home. The upgrade to Win 10 downloaded fine and started installing until the final bit Settings etc when there was a brief error "KMODE EXCEPTION NOT HANDLED" without any further info. No codes, numbers or anything else. Installation continued until 97% and then started rebooting in a loop for several hours already.
I'd prefer to finish the installation properly, but otherwise would like to roll back to Win 7 and have a usable machine with all data and programs intact.
I am upgrading a computer from Windows 7 to Windows 10. I completed the download, and got a message that the computer needed to restart to continue the installation. However, when I restart and the computer comes back up, the same message appears and the installation does not progress. When I go to check Windows updates in the control panel, it says it can't check for updates because another installation is in progress. I have restarted the machine multiple times with no progress - can't go forward, can't go back.
I recently started trying out Windows 10. It's buggy and frustrating, but it's still in preview mode, so... That's expected.
Nothing was working when I installed build 10074 off disc, so I installed build 9926 off a disc (I got the iso from MSDNAA, I'm a programming student) then upgraded via settings to 10074.
During the upgrade, my laptop started resetting, normal. But halfway through, the resets stopped working.
The screen switches off, the cd drive switches off and the hdd activity light switches off, but the power stays on, and the fan keeps running. It also doesn't switch off on shutdown either.
I finally have a working version of Windows 10, minus Cortana and Spartan (I'm in Aus), but now my laptop won't shut down.
Could it be drivers? Is it OS interference? Is there a way to fix it without uninstalling and re installing Win 10? I really cbf going through all that again...
Bit of background: Was getting 8024601 errors when attempting to upgrade with the Windows Update method. It would start installing, get to 85% before stopping for a while. Then it would finally reset, only to boot up win 8.1 and Windows update would have the above error code for the attempt.
So I decided to try the Media Creation Tool instead. I select the option to upgrade this PC, it downloads fine, and everything goes okay until it wants to reboot my machine. Tried it twice, first time it sat there waiting to restart. It never did, no programs exited, didn't log off or anything. Second time it gets to the same stage, but locked up my computer instead.
So every since wednesday i updated my windows (automatically when shutdown) and when i turn the pc back on it goes into repair and will keep restarting and repairing... I have to keep restoring to be able to even use the pc but windows needs updating and will keep doing this everytime, resorting in me having to restore AGAIN! This also happens when i try to upgrade to windows 10 .
I was fresh reinstalling my windows 10 onto my HDD as I encountered an error preventing me from booting the computer up, in the end I found it was my new GPU causing this error (a dead GPU?). So now my computer shows an error message: "The computer restarted unexpectedly or encountered an error during installation of windows". I looked this error up and it told me to press shift f10 to open a console and to type regedit in and to find status on local machine, changing the number from 1 to 3. I did this supposed fix, however, now my computer is in a infinite restart loop, displaying the windows 10 installation at 64% and then restarting again...?
I have done the update once, waited around 2/3 hours. i then reset my PC. i then did the update again, waited at least 5 hours. still stuck at 32% if there is a fix for this, i will do anything. i have a brother who did this update. My laptop is a pavilion 15 8gb ram radeon hd 7600g win 8.1
I upgraded from Windows 7 to Windows 10 at the first opportunity on July 30 after registering with Microsoft. The upgrade appeared to progress smoothly and I was able to boot the computer to see the new desktop screen. However, very soon after this first boot, the computer asked me to restart to finish the upgrade. This I did and my computer has since been rendered unusable. Every time I boot, the computer gets stuck on the welcome screen. It displays the generic circular user icon, with my name written underneath and the word "Welcome" written underneath this. The animated "computer working" icon (the little dots which rotate again and again) is displayed next to this. However, it never goes away. I left the computer for 12 hours and nothing changed (the little dots kept on rotating all the while). The computer otherwise appears fine (ie. the multimedia buttons at the top of the keyboard work fine) but the OS cannot get past this screen, no matter what I do.
I have unplugged all USB devices. I have tried booting with the power cable in and out. I have gone into the Advanced tab of the setup menu and disabled (and re-enabled) things like Bluetooth and Wi-Fi top test if this makes a difference. Nothing does. As things currently stand, I am completely unable to use my computer and all my files are stranded. Several of them are desperately needed.
I have tried pressing F8 to boot the computer in safe mode, but this doesn't seem to work (it results in a back lit but otherwise black screen).
Downloaded the iso and all seemed good , the compatible report said all was good . But now on the upgrade it has been stuck at 34 % for around 1 hr . I do have the circle with the little circles spinning ?
I have three computers in family that were given upgrades on the win7 family plan. One was just informed it was eligible for win10 upgrade. I think I made the mistake of custom install (for a clean install) instead of an upgrade and, related to other problems with windows update, I might have lost my activation on win7. Long story short, when I got to the point where win10 was installed and asking for a key I knew I had done a no no as, if I had done it correctly, I should not have been asked for a key. Of course I have no key but the win7 key and the install just sits there with no options but to input the key, which I don't have.
For a couple of days, I am trying every solution from this forum, for windows 10 upgrade on my laptop Dell 15 L502x (early 2011) with windows 7 Home Premium. I tryed via Windows upgrade system tray icon (after restart - black screen,mouse pointer), then I tryed wit ISO on dvd/USB, same problem. After that I have disable one graphic card, then another, in both cases, same problem. Every time(when black screen come) I tryed with CTRL and then type password - no result. I have updated all my drivers, all updates are downloaded,
Just downloaded the newest update for Windows 10, I was asked to restart my PC to install it, that was over 30 minutes ago, since then my PC reaches the Microsoft logo and under it, it says Preparing Automatic Repair and then it restarts and does that all over again, what am I suppose to do? I can't even get past it.
I finally decided to upgrade to Windows 10 yesterday (1/17/2016). It downloaded roughly 5.76 GB into a hidden folder : "C:$Windows.~BT"
Then it prompted me to restart my computer, so I did. Once restarted, nothing changed.
So I went into Windows Update, and it just tells me: "Restart your computer to install important updates" and it has a "Restart now" button. I've restarted roughly 40 times or so in the last 2 days after trying various fixes, and it doesn't make a difference.
I checked the update history, and there are a whole bunch of Pending and Successful updates with a "Date Installed" date of 1/15/2016. Nothing more recent either.
Last night I was trying to watch some good ole' dragon ball z. When this site gave me a virus. I tried system restore and was denied. So I hard reset my PC which I just upgraded from 7 to 10.
The reset was stuck at 50% for about an hour so I turned off my PC and flipped it back on to see if it'd retry the installation.
To my surprise I'm stuck in this loop where my computer shows the boot up dell xps screen and then restarts. F8, F9, F11. NOTHING WORKS. I can't get to any recovery screen like I could with Windows 7. I don't have a disk because it was of course the free upgrade on July, 29th. Also can't burn one due to not being able to get to my Desktop.
