Installation :: Existing Disks Not Recognised / Booting Of Old SDD

Feb 10, 2016

My nice new SDD arrived, I installed it into the PC and disconnected the other SATA drives bar the DVD, spun up my W10 DVD and fairly quickly had a new activated install of W10.

So I plugged in the old SDD (it has the old C: on it) and the HDDs and it booted off the old SDD.

Unplugged the old SDD, plugged in the new one plus the HDDs, it wouldn't boot.

Went back to just the new SDD installed, boots fine, hot-plugged the HDDs and it wouldn't see them.

So right now I'm back where I was with the old SDD and the two HDDs which are mirrored.

View 5 Replies


Similar Messages:


Installation :: Dual Booting 2 X OS Drives (Existing Installs)

Sep 27, 2015

I have 2 Windows 10 (7 Upgrades) Installed,

...I would like to set them up, so I can Dual Boot them, without re-installing them.

View 8 Replies

Dual Booting On Two Different Hard Disks

May 20, 2015

Okay, I have Windows 10, and Macbook. My PC, have 2 hard disks, one is of 500 GB ( Seagate ) and one is 3 TB Western Digital (Black).

Machine is loaded with:
CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler
Motherboard: Asus MAXIMUS VII HERO ATX LGA1150 Motherboard
Memory: Corsair Vengeance Pro 8GB (2 x 4GB) DDR3-1866 Memory
Storage: Seagate Barracuda 500GB 3.5" 7200RPM Internal Hard Drive
Storage: Western Digital Caviar Black 3 TB 3.5" 7200RPM Internal Hard Drive
Video Card: Asus GeForce GTX 770 2GB DirectCU II Video Card

I am planning to Install Mac OS X on 500 GB one and keep Windows 10 on 3 TB one. So is it okay if I will just remove the 3 TB Hard disk, and install Mac OS X on it ? 500 GB hard disk have files of Windows 8.1 already. But it is not my primary hard disk.

View 1 Replies

Installation :: What To Do About Existing Applications

Feb 10, 2016

I'm planning on moving from Win 7 to Win 10 via a new install (although it seems I should upgrade first - I'll read about that). My questions have to do with my Win 7 applications...

#1) Is there a list someplace of applications that need to be "de-registered" so they can be registered on the new Win 10 clean install? For example, I'm pretty sure the Adobe suite has to be deregistered - maybe MS Office too?

#2) Is there a way to move an application? By that I mean I either don't have the original install files anymore or in some cases I've found some useful software from [URL] .... where you download the install file but it has to be installed and registered that day. If you wait a day, you can't register it. Any way to "move" these programs? I realize generally you can't just move applications and then the added complication of going from Win 7 to Win 10.

View 9 Replies

Installation :: Is It Still Necessary To Remove Non - OS Disks During Installation

Dec 27, 2015

With Vista/7/8/8.1, having more than 1 HDD/SSD physically attached meant that the system partition(s) could potentially be on any disk. Is this still the case in 10, or has Microsoft finally fixed this bug?

View 3 Replies

Installation :: Could Not Create New Partition Or Locate Existing One

Jan 30, 2016

The error in the title appears when I try to format my C partition to install windows 10 there. This error does not appear when I install windows 7,I just formatted and installed 7 successfully however it doesn't work for Windows 10. Specs

2.9 GHZ xeon quad core
8 Gb Kingston hyperx
Nvidia GTX 750

I have two hard drives and 5 partitions in total but it just shows one big partition of 297 Gb.

View 3 Replies

Installation :: HP Pavilion DVT7 2200 / Reinstalling Windows 7 Using Recovery Disks?

Oct 10, 2015

Prior to doing my Windows 10 upgrade on my HP Pavillion DVT7 2200 Notebook, I successfully created the 3 Recovery disks. Prior to that I was receiving messages that a hard drive failure is eminent and I should back up my files and replace the hard drive. My Windows 10 upgrade went fine and for most part I'm happy with it. My issue now is my XP Mode is not supported and I have lost a VM that is use run legacy software.

My question is when I run my system recovery is it going to roll me back to where I was before creating the Recovery disks? Will I have to reinstall all my software? I have ordered a replace HDD from HP and it will be arriving on Wednesday.

View 6 Replies

Installation :: Error Couldn't Create A New Partition Or Locate Existing One

May 30, 2015

I am trying to install Windows 10 10130 onto my laptop's blank partition that is 400 GB. Upon installing I noticed it gives me an error that says "We couldn't create a new partition or locate an existing one." I'm not sure what this means, as I have repeatedly formatted and erased the partition to no avail. I do have another partition with Windows 8.1 installed, so I am trying to salvage that and get the Windows 10 installed onto the other one.

For some strange reason. On boot, It asks me to pick either Windows 8.1 or Windows 8, and Windows 8 isn't installed...

This laptop is a mess. I bought it used, and it has only given me issues. Luckily I have my Desktop so it's not like I rely on this laptop.

View 9 Replies

Installation :: Windows Couldn't Create A Partition Or Locate Existing One

Oct 31, 2015

I had a kali linux installed in my computer. Then I tried to install Windows 10 using a bootable USB drive. (I created it by downloading the windows 10 ISO and then creating USB drive using Rufus.) But when I was trying to install windows 10, it shows my hard drive, but it doesn't installing to it. Error message is the following:

Code:
We couldn't create a new partition or locate an existing one. For more information, see the Setup log files.
Then I checked for the log file (X:Windowspanthersetupact.log) It has this message:

Code:
LogReasons: [BLOCKING reason for disk 0: CanBeSystemVolume] The selected disk is not the computer's boot disk
I know that right ? USB disk is the boot disk here. Then I searched in the internet for a solution.

I came up with this: [URL]...

I followed all the instructions there. Cleaned my hard disk using DISKPART and formatting and stuff. Then I rebooted my machine. But, still it shows the same error.

View 5 Replies

Installation :: Create Dual Boot With Existing WinXP Install

Jan 25, 2016

GOAL: Create a dualboot system with a clean WIndows 10 installation on SSD while keeping my regular Windows XP for as long as I need it.

SITUATION: Monoboot system booting Windows XP from a regular HD. I already purchased an SSD for Windows 10, but need to install it.

QUESTION: Which steps (and in which order) should I take to make my goal as stated above achievable without (too much) hassle. I was advised by a friend to simply install the SSD, then start installing Windows 10 and everything would be ok as W10 would recognise the existing XP installation.

View 9 Replies

Drivers/Hardware :: Only One Of Two Optical Drives Recognised

Aug 6, 2015

Still checking out changes but most obvious is loss one of my drives. How to locate?

View 1 Replies

Drivers/Hardware :: HP LaserJet 5 With USB-Parallel Only Recognised After Replugging USB?

Nov 17, 2015

I have a very old but perfectly reliable HP LaserJet 5, which under Windows 7 worked perfectly using a USB-Parallel converter.

Under Windows 10 (Enterprise RTM, clean install, not yet Threshold 2), it is recognized (and prints fine) if its USB connection is plugged into the computer after switching on the printer.

However, once turned off, it is not recognized just by switching it back on. Although it appears in Windows Printers correctly, it won't print unless the USB wire is unplugged and then plugged back in again.

it's been perfect since 1997 under Windows 98, XP, and 7 (with the USB-Parallel converter).

View 9 Replies

Drivers/Hardware :: Samsung DVD Write SH224DB / RSMS Not Recognised

Aug 17, 2015

I have upgraded to window 10 about a week ago and I have Samsung DVD Write SH224DB/RSMS DVD supawriter, in my pc desk top pc and since upgrading to windows 10 I can't use it, it do's not even show in the devise manager or any online hardware dives programs.I do know it has power to the device but will not read and disc or film disc.

View 5 Replies

Installation :: New HDD With Windows Not Booting?

Oct 11, 2015

I installed windows on my new hdd (because current is starting to fail). But when i have only that drive connected it just skips it and starts PXE over ipv4. Is there anything i need to do to make it bootable? PS. I had to install it on legacy support

View 9 Replies

Installation :: Error After Booting VM After Sysprep

Sep 22, 2015

So we're trying to get our first Win10 VM up and running. I downloaded the latest ISo from the Volume License site and installed it on a VM just fine. I ran all Windows Updates as well.

After that I ran Sysprep and choose OOBE, Generalize, and Shutdown. I then copied the VHDX file to a new location for a new VM as we normally do.

That all seemed to work fine until I then attached that hard drive file to a new VM and fired it up. After clicking the through the timezone page I get an error stating:

Windows could not complete the installation. To install Windows on this computer, restart the installation.

I found some info online about changing the minimum password setting to 0 but that did not work. I then fired up my Template machine to see if that would setup fine and that now gets the same error so I'm kind of stuck.

I don't want to have to do manual steps on every VM we create

View 2 Replies

Installation :: Keeps Booting From USB After Clean Install

Aug 2, 2015

I got a HP Notebook yesterday that had Windows 8.1 on it. Today I decided I wanted to reinstall Windows 10 (not upgrade, but clean install) on it and I do have experience in reinstalling operating systems. I reinstalled Windows 10 from a USB stick and when the computer restarted after the installation was done, it would keep booting from the USB stick. I exited the installation screen and then went to the BIOS to change boot priority to "OS Manager", but all I got was an error which I don't remember what it said, and then it just restarted again.

So my question is, how can I get Windows 10 to boot after is has installed and restarted?This is my laptop: HP 15.6 Laptop - Black (Intel Celeron N3050 / 500GB HDD / 4GB RAM / Windows 8.1) : Laptops - Best Buy Canada

View 7 Replies

Installation :: Dual Booting With Ubuntu 15.04?

Oct 15, 2015

I've just built my desktop and I'm trying to dual boot Windows 10 and Ubuntu 15.04.

I've already partitioned my hard drive, and installed Windows 10 and Ubuntu 15.04, but I'm trying to get to a place where I can choose what OS to start whenever I turn on my computer.

At the moment, I can run both Windows 10 and Ubuntu 15.04 if I go into the BIOS and rearrange my boot priorities, but that's just a huge hassle. Is there a convenient way to choose at startup, similar to how Windows 8 had this?

View 9 Replies

Installation :: Dual Booting With Windows 8.1?

Jul 17, 2015

I have the ESD for Windows 10 built 10240 . I need to clean install it on a different drive and dual boot it with Windows 8.1. Can I simply boot with the 10 ISO (in UEFI boot) and clean install it on a different drive?

Would I then be able to dual boot it with my activated 8.1 copy?

View 2 Replies

Installation :: Booting From Thumb Drive?

Jan 31, 2016

I'm still running Vista. I recently purchased a thumb drive with Windows 10 from Microsoft (only because they don't sell them on disc anymore, which is easy and I've done a clean install of Vista half a dozen times from CD-Rom).

Anyway, I plug in the thumb drive, I reboot, go to BIOS, set to boot from USB-HDD. Exit that, and a screen comes up with the device (my USB with Windows 10) at the top and Verifying DMI Pool way down at the bottom. But then nothing. It just hangs there. As far as I can tell, it will hang there forever (but at the very least an hour).

View 9 Replies

Installation :: How To Install Win 7 On Second HD For Dual Booting

Feb 10, 2016

I have Windows 10 installed on HD1 (Samsung) and working will. I had a second HD2 (WD) with Win7 installed for a dual boot operation. For some reason, I could never successfully boot into Win7. Out of frustration I decided to format the Win7 drive and start over.

The problem now is I cannot install Win7 on the HD2 drive. When I choose F12 on boot up and select the WD disk, a screen appears saying "Windows Boot Manager" It instructs me to insert my Win7 install disk an reboot.

Next steps:

I insert the Win7 install disk and reboot using F12 to select the WD disk. The "Windows Boot Manager" screen appears again with the same instructions as above! If I reboot again and do nothing, the system will boot to Windows 10.

My question, how to install Win7 on the WD disk and then setup a dual boot operation?

View 7 Replies

Installation :: Dual Booting Restart To Other System

Aug 17, 2015

I have dual booting setup on my pc my main system and my development system but to get the development system my computer first boots the main one then asks me which os i would if the main one it goes right to as it already loaded but if it is the development system it will restart and load that, so my pc has to boot twice. Is there a way from the main system some how i can restart straight to the other one. Both os are windows.

View 1 Replies

Installation :: Dual Booting Set Up In System Configuration

Nov 5, 2015

Just getting to grips with W10 and noticed that dual booting can be set up in System Configuration-boot. This was the case in XP, I think or was a previous version. Bit late now as I have easybcd on W7 drive. Before you ask I have never had a successful install where W10 finds W7 and displays that fancy box on start up.

View 8 Replies

Installation :: Dual Booting - SSD Included In System

May 17, 2015

I've decided that I would like to dual boot Windows 10 TP (I know im late to the game)

Now ive done dual booting before, but I was wondering if its any different, as my system has change to include a SSD which just has windows 7 and a HDD with my files.

If I just partition my HDD to a smaller size and install windows 10 on the other half of that partition will that work and not affect windows 7

View 3 Replies

Installation :: Can't Get Rid Of Message Regarding Fast Booting On Samsung Notebook

Aug 8, 2015

Just upgraded a Samsung Notebook from Windows 7 to Windows 10, keep getting "This application does not support this version of Windows" message regarding Fast Booting, tried compatibility fixes and turning the application off but the messgae still keeps popping up?

View 3 Replies

Installation :: Dual Booting On Separate Hard Drives?

Aug 16, 2015

I want to dual boot windows 7 and windows 10 on 2 separate hard drives.

View 9 Replies

Installation :: SSD Migrated System Not Booting Unless Selected In Bios

Aug 23, 2015

My wife purchased a Dell 8700 XPS with i7 4790 processor,16GB ram. and Nvidia GeForce GTX 745 4GB and a 2 terabyte hard drive. She also purchased a Kingston HyperX 120 GB SSD. I used a popular software to migrated Windows 8.1 Home to the SSD from the HDD. This seemed to work well but on booting up the system the HDD boots unless I go into the bios and select the SSD in SATA 2 under the DVD reader/burner and select a {boot manager on Disk 1{ which was installed by migration software. I had hoped to format the HDD and use as data disk afterwards.

I noted that some threads mention I should have disconnected HDD when booting from SSD first time which I did not do.It also appears that the OEM partition is still on the HDD. I believe a clean install is required. Will this also remove the > boot manager on disk 1> line in the bios.

View 9 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved