Installation :: Explorer Crash Loop After Update On Fresh Upgrade
Aug 18, 2015
I did an in place upgrade of Windows 7 using a USB key made with the tool Microsoft put out. I chose not to download updates during the install, so after the initial boot, Windows started downloading updates. I reinstalled the latest nVidia drivers/Geforce Experience as well. During the next boot cycle, at some point explorer crashed and the screen flashed black, at which point that process repeats forever. I let it go over an hour just to see what would happen. URL...
The suggestion on that site is to disable 2 Windows Services: Problem Reports and Solution Control Panel Support and Windows Error Report Service. This didn't work for me, though it appears to have worked for many others.The culprit for me was Apple's iCloud service. As the taskbar was being populated, this task would load and throw an error message about logging in, at which point the crash loop began. Uninstalling this program solved the issue for me.
View 1 Replies
Similar Messages:
Dec 10, 2015
I just had to re-install W10 using the latest build offered by the Microsoft Setup Tool because W10 on one machine became corrupted somewhere along the multiple update path! No problems, except it seems that a few of the default settings are a little different than they were in previous downloads. Most are for the better. But...I can't seem to figure out how to turn off the display of all the disk drives in the Navigation Pane of File Explorer. I have five other systems that have migrated successfully along the update path and they don't look like the screen shot attached. What or where is the setting to turn off the display of the disk drives when the "This PC" is collapsed.
View 9 Replies
Aug 4, 2015
I have Windows 7 Pro on a Dell 5420 laptop. I've tried the upgrade multiple times and it always gets to 84% and then the screen goes black/blank. It sits there for upwards of a couple hours. After that it reboots and says Restoring previous version of Windows and I end up back at Windows 7.
I don't know if there's any logs somewhere I could check to try to figure out what the problem is.
Do I have any options for upgrading this laptop if the update from 7 to 10 won't work? From what I've read I need to get the in place update to work in order to get a valid Win 10 key so I might be screwed...?
View 6 Replies
Dec 6, 2015
So basically, I've been dealing with this issue ever since I've upgraded to windows 10 months ago. I've done disk checks sata port checks almost everything under the sun and still have not found a solution to my problem.
Months ago, anytime my computer was shut down for more than an hour or 2 I would encounter an interesting unique problem. After booting and loading the bios screen, the next screen would be black and would hang there and I would have to hard reset and try again. I would keep having to hard reset until it would boot into the Windows Boot Manager and from there I would hit the Reset button or go to the advanced settings, and hit continue to windows 10 and it would from there boot into windows successfully.
Now you must be thinking "Simple work around! Simply boot into the Windows Boot Manager every time you shut down your computer and easily but annoyingly bootleg boot into windows 10 everytime using the Boot Manager options" and I thought the same. Unfortunately unless I let my computer get to the boot manager by hard resets at that black screen I cant get windows 10 to boot.
I've reinstalled windows 10 again for the 2nd time on a new ssd in hopes that it was a drive issue but that does not seem to be the case, This is my second install of windows 10 on this ssd. This time I've installed windows HOME instead of Pro.
I do NOT boot into a black screen with a cursor
There is now something I'm going to call "The Event" After a fresh install my windows 10 will freeze however i can move my mouse but no keyboard commands work and I from this point have to force reset my computer, AFTER i FORCE RESET when my computer is shut down for a couple of hours i encounter the boot problem. so this "EVENT" has something to do with whats causing this issue.
The Event was different when windows 10 was installed on my 1TB HDD, everything would lock up rather then being able to use my mouse and it would force reset on its own.
View 1 Replies
Jul 31, 2015
Anyhow I am currently using windows 7 (not a fan of windows 8). Since windows 10 is released I wanted to install and try it. Initially I installed windows 8.1 in my D: drive (works normally as far as I can tell), and upgrade it to windows 10. I am keeping my windows 7 in drive C: as I do not have any other working computer if the installation failed.
So halfway upgrading from windows 8.1 to windows 10, the upgrade failed and a restart is needed. When restarting I tried to reset the installation but even that is failed. When restarted again there is no operating system in that drive (drive D: ) ??
Currently I tried to reformat my drive D: (windows 10) with my current windows 7 (installed in drive C) but it says the volume is in use by another process but it refused.
Summary
Drive C: - windows 7, still functioning properly
Drive D - where windows 8.1 is located and upgraded to windows 10 but failed, currently cannot detect any os when I boot from drive D: , and cant format the drive.
I know its really complicated the way i installed my windows 8.1 with my windows 7 intact, but I'm worried if the installation failed, I have no backup computer to fall back.
View 1 Replies
Aug 1, 2015
My installation is stuck in a reset loop. The Win 10 Ready to Install came up, so I clicked Start and it rebooted, back to the login screen, and then Windows Update came up saying it needed to Restart Now. After a couple of minutes the Win 10 Ready screen comes up again. I've rebooted about 20 times and get to the same point every time.
View 2 Replies
Aug 6, 2015
My windows 7 PC was hard to start and restart and I needed to try 10 times or more before it worked (then I didn't restart it for days).
I managed to upgrade it to Windows 10 hoping that it will cure the problem BUT still it is a problem to start.
I checked everything and used every tool possible on windows 7 and windows 10 but nothing worked. (ccleaner and others failed)
So now I have a windows 10 PC that doesn't want to start easily.
After upgrade to windows 10 I GUESS that all driver files have been changed ?what else could it be ?
View 5 Replies
Aug 8, 2015
Lenovo ThinkCentre, 32bit was running fine on Windows 7 Home. The upgrade to Win 10 downloaded fine and started installing until the final bit Settings etc when there was a brief error "KMODE EXCEPTION NOT HANDLED" without any further info. No codes, numbers or anything else. Installation continued until 97% and then started rebooting in a loop for several hours already.
I'd prefer to finish the installation properly, but otherwise would like to roll back to Win 7 and have a usable machine with all data and programs intact.
View 2 Replies
Jan 5, 2016
These are my issues:
When I create a New Folder and try naming it, it freezes, then Explorer will restart. The folder will be made but if I try to rename it, it will do the same thing.
When I try deleting that empty folder, the Moving to Recycle bin takes over 30 sec long, there is nothing inside it. I can delete a big regular file instantly.
The Context menu also has very black thicker separator lines compared to what it should be a faint light grey color. That was the first thing I noticed that was off.
View 9 Replies
Feb 10, 2016
I have encountered this problem (in thread line) for the past 3-5 days and I have come no closer to any solution during that period of time.Basically, as soon as I left click or right click on a file in Windows Explorer it will crash. My Windows icon in the bottom left has also stopped working and I cannot ask Cortana anything (not that I did anyway...).
None of the advanced boot options work either (system restore, clean install etc...).
View 9 Replies
Jan 30, 2016
if i open any folder and try to resize it, the file explorer instead resize into a small window then the contents kept blinking until it crashes.
View 1 Replies
Aug 8, 2015
I would like to upgrade my Windows 7 to Windows 10. I have so many files and games installed on windows 7. I am afraid of compatibility issue and might lose the save file.
Does any of here a Windows 7 Ultimate users and upgrade their OS to Windows 10? What happen does it affect any program and lost game save file? I want to know cause there's no turning back after I update my OS.
View 1 Replies
Oct 21, 2015
I am a video director. I have numerous 1TB drives, USB 3. They are formatted with ExFAT. Files are typically large: 50Gig and better. Worked and readable fine in windows 7. Could read, write, edit with them. But not in Win10. Plug it drive, it is recognized. But once you start to click files, computer freezes. Happens in at least 2 different different Win10 computers, one upgraded, one original install. If I open an application first, like quicktime player, can see files, run them, rename them, copy them. But in Explorer: freeze/crash.
View 4 Replies
Jul 28, 2015
i have windows 8.1 and already reserved windows 10 , but windows update doesn't work always stuck at checking for updates i tried all fixes on the internet and it didn't work . so how do i get windows 10?
View 9 Replies
Aug 5, 2015
I restarted Windows 10, and it started installing updates. The computer restarted a couple times saying it was installing updates, and eventually it said that there was a problem installing the updates, and that it was reverting changes. It hung on this is screen for about five minutes, and then (my arm touched the keyboard in this instant, not sure if any buttons were pressed) I got a blue screen, with the error code disappearing too fast for me to read and remember it. Now when my computer attempts to start up, it shows the gigabyte 3d bios splash screen, goes to a black screen with a command prompt-esque cursor blinking, maybe five or so lines from the top. At this point it seems the only input it will accept is ctrl-alt-del, which restarts it and leads to the same outcome.
View 1 Replies
Dec 6, 2015
So basically, I've been dealing with this issue ever since I've upgraded to windows 10 months ago. I've done disk checks sata port checks almost everything under the sun
Months ago, anytime my computer was shut down for more than an hour or 2 I would encounter an interesting unique problem. After booting and loading the bios screen, the next screen would be black and would hang there and I would have to hard reset and try again. I would keep having to hard reset until it would boot into the Windows Boot Manager and from there I would hit the Reset button or go to the advanced settings, and hit continue to windows 10 and it would from there boot into windows successfully. AHA! now you must be thinking "Simple work around! Simply boot into the Windows Boot Manager every time you shut down your computer and easily but annoyingly bootleg boot into windows 10 everytime using the Boot Manager options" and I thought the same. Unfortunately unless I let my computer get to the boot manager by hard resets at that black screen I cant get windows 10 to boot.
I've reinstalled windows 10 again for the 2nd time on a new ssd in hopes that it was a drive issue but that does not seem to be the case, This is my second install of windows 10 on this ssd. This time I've installed windows HOME instead of Pro.
Do I've wasted a write cycle on this new Samsung 850 evo? I just received it in the mail and would rather not waste its lifespan on trouble shooting
View 3 Replies
Sep 5, 2015
Hardware consisted of z87pro, 16gb ram, sandisk 250gbssd. Purely for office work and was fine. Upgraded to windows 10 initially and all seemed fine. Few weeks later being yesterday the pc would boot but got stuck on the windows 10 loader screen with the dots going round and never getting past it. Anyway in the end I had all my data so I formatted the disk and started again. Following fresh install of windows 10 as soon as the initial updates were applied the machine would appear to shut down but would not go off. Manual restart would lead to the machine getting stuck on the white dots going round and round.
I have also tried another SSD drive and a windows 7 to windows 10 upgrade and the same problem repeats. It seems as soon as the latest updates are applied and machine is rebooted it then fails to load the OS..I now have an image of windows 10 following install without the updates but soon as those initial updates go on the os fails on the white dots going round and round... The os shuts down with no updates and re-loads..
View 1 Replies
Oct 2, 2015
Installed the windows 10 preview on my IMac a while back and was upgrading fine and then it stopped updating as the updates would fail constantly, and now my IMac is still on build 10162. It was running fine but the time has come and my computer will be rendered useless in a matter of days(your pc will restart every few hours and will eventually fail to start if you don't upgrade to the latest version)... Windows update doesn't detect any updates, the preview builds option in settings is completely GONE and there is no way at all to update (at least not without losing everything i guess ) How can I upgrade my computer to the final version of windows 10 and keep all my data?
View 2 Replies
Aug 6, 2015
I am using Windows 7 SP1 [ Genuine ]. My upgrade to windows 10 is ready via windows update but i don't want to install it. how to remove this option so that normal system updates can be install.
View 2 Replies
Feb 10, 2016
Current build: Intel Core i7-5820K, EVGA GeForce GTX 980 Ti, Fractal Design Define R5 (Black) - xnaasDT - xnaas's Saved Part List - PCPartPicker
Old build (until I update my site): Desktop Specs
Dump files:
[URL]
How this started So I was running on my old build just fine. I wanted to upgrade from an i7 to make streaming hurt a bit less and maybe experiment around with some server stuff. Anyway, I went to Fry's on Sunday(?) and bought everything. I got Windows installed and everything the following day (Feb 1, where the first BSOD occurs). When I installed Windows, I completely wiped my SSD and did a new install of Windows 10 Pro via USB. Installed all my drivers and thought everything would be good to go. BSOD on day 1. I thought it couldn't be too big of a deal and went on.
Where we are now Now, I've gotten 3 BSODs. I cannot get another one to happen. I ran memtest overnight and my RAM completed 48 passes with 0 errors. I know this isn't a 100% sure way to know that the RAM is fine, but it seems like a pretty good indicator. Granted, it's Patriot, which is like the lowest tier of RAM, so it's very likely I just have faulty RAM.
I've attached SSD and RAM support lists. Technically neither is on the list, but it seems unlikely that this is the cause. Other, similar, Patriot memory is supported and the smaller version of my SSD is supported.
All of my drivers are up to date from Nvidia, Intel, and Gigabyte. SSD firmware is up to date. Periphels have up-to-date drivers as well. I can't see an out-of-date driver being the issue here, although my BSODs would seem to indicate that is the case unless there is an obvious hardware failure.
What to do? I have 30 days from Sunday to take anything in for a full refund or swap. If this is a hardware issue, I'd like to go in and get it remedied immediately. If this is a driver issue...I'm not really sure what I can do. I can't get the BSODs to happen, they just happen when they do. All of my drivers, firmware, BIOS, etc. are up-to-date.
Should I do a fresh install of Windows again and work from there?
View 4 Replies
Apr 14, 2016
I'm currently running Windows 7 Pro on a Lenovo ThinkPad.
I have the Get Windows 10 icon showing. When I click it, it takes me to the Upgrade Now button. So far so good.
When I click the Upgrade Now button, I get the starting to download screen with the circle dots. After a few seconds, it then takes me to the Windows 7 'Windows Update' page in the control panel, where it says that 'windows is up to date'. And that's it.
How to get Windows 10 to upgrade? I've done other laptops without issue.
View 2 Replies
Nov 22, 2015
Office (2016) worked fine until I upgraded windows 10 to TH2 then stopped working and now crashes on startup. I have tried the quick repair and the online repair and even clean installing the program finding out that it still crashes.
View 2 Replies
Aug 17, 2015
I upgrades to Win 10 the the above network/wireless printer worked fine. I've now done a fresh install and it doesn't!
The scanning function works but trying to print produces an error. I've been advised by Samsung support that their driver doesn't support Win 10 and that they don't know when a new version will be released. They said it would still function under the upgrade as it still had access to the old Win 7 drivers there.
Any way of making the Win 7 drivers available on a fresh Win 10 install?
View 5 Replies
Feb 10, 2016
Is there a way to install fresh windows 10 without .ISO, usb and dvd? I updated my windows 7 to windows 10, but now I want fresh install, is it possible to do it? Like just to start setup.exe and install it ... I've seen some yt video here: URL... so I was wondering is this even legit, will it work like that?
View 1 Replies
Jul 29, 2015
So i currently have 8.1 and i would like to reformat my Partition and do a clean install of windows 10. I have downloaded the windows 10 CD boot from here Windows 10 i have windows 8.1 home so i downloaded windows 10 home. And when i was doing the installation. it was asking me for my Product key. I typed in my Product key but it said " it did not recognize my Product key" So i quit the installation. I was wondering why it did not recognize my product key when we have the upgrade for free. Is there any other way to do a fresh install on windows 10? because i really would like to reformat my main partition and then do the installation of windows 10
View 4 Replies
Aug 22, 2015
I have successfully upgraded from win 7 to win 10 but i would like to do a fresh install as its been years since i have and would like to start from fresh.
I made the x64 DVD from the MS installation media creation tool.
I run the setup.exe from the disc and it starts downloading updates goes through the processes but after 1 hour or so a message comes up saying installation has failed.
I looked at you 'Clean install' guide and this relates to USB not DVD or is the process the same?
Should i be booting from the DVD rather then running the setup.exe
I did try but my pc restarts and just loads normally with out actually booting via DVD
View 9 Replies
