Installation :: Fails To Boot After Update?

Oct 25, 2015

After a critical update on the 20th, my computer will no longer boot. I have tried using this method to reset, i have also tried using the repair tools to return to windows 7, which fails as well. System restore also fails. My computer didnt come with recovery disks. I called tech support and they transferred me to sales so i could buy a clean copy of windows 10. get back to windows 7. I was a fool to upgrade. 

View 2 Replies


Similar Messages:


Update Fails During Second Boot It Stops At 93% And Goes To Black Screen For A While

Aug 4, 2015

I reserved my copy of windows 10. I have tried to update it plenty of time but every time i do it fails during the second boot, it stops at 93% and goes to a black screen for a while, than it says "restoring back to your previous version of windows" I dont know what to do. I tried mostly everything. I deleted all the files in the software distribution and went into command prompt and put in wuauclt.exe /updatenow that didnt work. I downloaded the windows tool directly from windows that didnt work.

View 7 Replies

Installation :: Update Fails Around 80 - 90% And BSOD Shows Up

Aug 13, 2015

So I've been trying to update to WIN 10 a lot of times since it came out. Unfortunately the update fails around 80-90% and a BSOD shows up. The BSOD says something like Kernel Inpage Error. I've tried to update from Windows Update, the media creator tool and from the "Get Windows 10" program.

View 2 Replies

Installation :: Update Fails Numerous Times

Aug 2, 2015

17 to be exact so far today. I have cleared the software dist. folder numerous times...ran wuauclt.exe/updatenow and everytime it fails.

View 2 Replies

Installation :: Upgrade Fails - Second Boot Error On Migrate Data

Aug 8, 2015

I have tried and tried to upgrade from WIN 8.1 to 10 with no success.

The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."

I have removed all 3rd party antivirus, and a bunch of other fixes. A

View 1 Replies

Recovery Drive Boot Fails With Missing Boot Configuration Data

Feb 2, 2016

When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.

The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.

I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.

View 3 Replies

Fails To Update

Sep 14, 2015

3 times ive tried to upgrade my windows 7 pro to windows 10 pro and 3 times it has failed at 57% ( installing drivers and software middle portion). results in bluescreen then reboots says trying to recover install and blue screen again then it goes back to windows 7 and boots right up.If I try to clean install to windows 10 it says key not valid ( using my win 7 pro key)

Ive tried to install from the little icon on the bottom of my screen, from a usb 3.0 made with windows 10 usb maker tool, and a usb 2.0 from the same tool ALL FAIL!ive got an 8350 1tb ssd, 16gb ram 7970 gpu fully loaded system top end from 2012 and it wont go!

View 1 Replies

Installation :: Gigabyte Brix - Windows Could Not Update Computer Boot Configuration

Sep 16, 2015

I've just bought a little Gigabyte Brix 1900, but when installing Windows 10 I got an error saying:

"Windows could not update the computer's boot configuration. Installation cannot proceed"

It turns out that the unit needs a BIOS update to the latest version before Windows 10 can be installed. I just wanted to post this information here, as I imagine this will be a frustration to many others!

With a few workarounds, you can update the BIOS from within the Repair > Tools > Command Prompt options. Just be sure to download the DOS BIOS zip from the gigabyte website (which won't run properly, but contains the ROM), plus the Windows BIOS tool which you can then run from the command prompt. 

View 8 Replies

Windows Fails To Boot After Shutdown

Jan 1, 2016

I have just built a new gaming PC and everything works fine, windows installed correctly, all drives are recognized programs are installed etc.

But I have a small problem... When I shut down, power off and leave my PC for a while, upon startup, windows wont boot. It goes onto the motherboard screen and then says ''starting automatic repair''. It gives me a list of options, and the only option which gets me back to windows is to restore to a windows recovery backup which I created. Every time I shut down, I have to restore and then add a few programs that got removed which is very annoying.

The PC is stable and all my programs which are installed are working fine, but for some reason, it enters this recovery mode when I start up from a shutdown.

I am running windows 10 64bit, my motherboard is an Asus VII Hero and I have installed all the drivers which are needed along with a few programs. I am thinking I may need to do a re-installation of windows, would that fix the problem?

View 1 Replies

UEFI Fails To Boot From USB Stick

Oct 22, 2015

Downloaded Windows 10 ISO, created a bootable flash drive using "Windows 7 USB DVD download tool" which I also got from Microsoft.

Set first boot device to USB in BIOS.

Saved changes and turned laptop off.

Turned it back on, with the flash drive plugged in, but computer boots to Windows 8.1 instead of the Windows 10 installation.

Restarted again, and pressed F9 to show a list of boot devices, it just shows OS boot manager, and DVD drive, not the flash drive.

Tried with Windows 8.1 USB installer, same thing happens.

Went back to BIOS, enabled "Legacy Mode" and turned off "Secure Boot", restarted, the computer can now boot to the USB stick.. for both Windows 8.1, and Windows 10.

Disabled Legacy Support, the computer fails to boot to USB devices again.

So, I cannot boot to a USB device if I have Legacy Mode disabled in my BIOS.And if I boot using Legacy Mode, Windows wants to convert my GPT HDD to MBR.

How do I boot to USB using UEFI instead of Legacy?

View 1 Replies

Updates :: Fails To Update To Version 1511 / Always Gets Stuck

Jan 3, 2016

I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.

View 4 Replies

NVidia GeForce GT 620 Fails To Update - Error 0x80070002

Jul 30, 2015

NVIDIA driver update for NVIDIA GeForce GT 620 fails to update in Windows 10 - Error 0x80070002 - After upgrading, I lost my 2nd monitor.

View 2 Replies

Update Downloads And Tried To Install But Repeatedly Fails At Around 70-80% Each Time

Jul 1, 2015

I have recently been trying to update an old hp laptop running windows 7. The 10130 update is showing ready to download, it downloads and tried to install but repeatedly fails at around 70-80% each time. It gives an error code of 800703f1 each time.

I have tried disabling all security features and firewalls etc. The laptop will not let me restore or reset to factory settings. I am not able to download the bios file as i have no flash drive to put it onto.

View 1 Replies

Updates :: Update Fails For Version Of Office That No Longer Exists

Dec 18, 2015

At one time, I had Windows 2013 on my desktop computer. At some point I upgraded to Office 2016 and uninstalled Office 2013. However, every day for weeks now, Windows Update has tried (unsuccessfully) to install the following:

Security Update for Microsoft Office 2013 (KB2956151) 64-Bit Edition
Update for Microsoft Lync 2013 (KB2956174) 64-Bit Edition
Update for Microsoft Office 2013 (KB2899522) 64-Bit Edition
Update for Microsoft Office 2013 (KB2881001) 64-Bit Edition
Security Update for Microsoft Lync 2013 (KB2881013) 64-Bit Edition
Service Pack 1 for Microsoft Office 2013 (KB2850036) 64-Bit Edition

I don't know if other updates are being blocked because these can't be installed. Plus, there appears no way to tell Windows Update NOT to try to install these again, as previous versions of Windows had.

View 5 Replies

Drivers/Hardware :: SteelSeries Driver Update Continuous Attempts / Fails

Oct 16, 2015

I have a SteelSeries Sensei mouse and a Razer BlackWidow keyboard. Windows 10 daily attempts to install a "SteelSeries ApS - Keyboard - SteelSeries Sensei [RAW]" update. The update fails within seconds of starting with error 0x80240016. The initial failure message darkens my screen (even when another program is full-screened) and shows a simple message, I don't currently have the verbiage and can't reproduce until Windows attempts automatically.

The update says keyboard in the name, but also says my mouse model. I'm sure it probably pertains to my mouse, but my mouse is working fine and this update fails regardless.

I've rebooted. I've attempted to install while a different mouse was plugged in. I've tried updating mouse and keyboard drivers automatically through the Device Manager ("device driver is already up to date"). I've installed keyboard and mouse drivers from the vendor sites.

Is there anyway to get Windows 10 to forget about this update and stop trying to install it?

View 1 Replies

Installation :: Cannot Install Windows Update And Install DVD Won't Boot (to Repair)

Nov 14, 2015

My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.

All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.

View 11 Replies

Installation :: HP Envy 120 Fails To Communicate

Sep 5, 2015

Since updating Windows 7 to Windows 10, if I try to" scan to computer" I get a message on the printer touch screen " No Connection No computer is connected" How can this be corrected?

View 1 Replies

Installation :: Upgrade From Windows 8 Fails?

Sep 8, 2015

I've successfully updated to Windows 10 on my two Surfaces, but there is some kind of issue on my desktop PC. The upgrade process from Windows 8 fails at about 71% total (Installing features and drivers at 91%), and the error I get is:

C1900101-40017 Windows Update ran into a problem.

When I click on "Get help with this error" I'm directed to a page with some general troubleshooting with Windows Update. I've run Windows update repair tool and it fixed some issues, but the installation failed again.

I have now tried freeing up more disk space which I admit was a bit tight and I'm preparing to run the update again. Still, I'd prefer if there was a more detailed error message or a log file where I could see what exactly went wrong, but there are no indications where I might find one (either in the error message, the troubleshooter, or Google). As it is, I'm shooting blind here and this will now be my fifth upgrade attempt.

View 9 Replies

Installation :: ISO File Downloading Fails At 98%

Jul 31, 2015

I have a problem with downloading Windows 10 Pro .ISO file. I tried to download it two times but every time media creation tool exits suddenly when it gets 98% without any error message or something! and the process in task manager is killed automatically,

View 3 Replies

Installation :: Upgrade From Win 7 Fails With No Error

Jul 30, 2015

I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears

I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.

View 2 Replies

Installation :: Clean Install Fails Activation

Dec 5, 2015

I have a HP desktop with W-7 that the HD is failing. (Almost failed)

I can't do a clone or a system image.

I installed a new HD and booted from my latest USB Upgrade from the Windows Media Creation tool.

I skipped the activation as it installed.

Now when I use the original product key, it fails to activate.

View 8 Replies

Installation :: Media Creation Tool Fails?

Aug 3, 2015

My laptop was upgraded to Windows 10 two days ago but my desktop has not received the green light yet. I was reading that if you downloaded the Media Creation Tool from Microsoft's web site that it had an option that would allow up to upgrade your PC or create an ISO install disk. I downloaded the app on my laptop and created an ISO disk as a backup in case I need to do a clean install on that platform but when I tried to run the app on my desktop it brings up the UAC prompt asking if I want to run this program and when I click Yes, nothing happens.

I read some thread somewhere that if you're having problems with this app you need to do a selective startup where you don't run any startups and you disable all of the services and after restarting, I tried this and after restarting my PC running the Media Creation app again failed to do anything .

If I run Windows Update it says I have no updates pending but it was interesting that every time I've run the Media Creation Tool it puts an entry in my update log that says the update failed. The fact is the upgrade has not failed in the normal sense only the Media Creation Tool failed.

My concern is that I have a reservation for the upgrade but that too might fail so I'd like to get my desktop upgraded to Windows 10 asap.

View 4 Replies

Installation :: Upgrade Stops At 24% Fails With 0xc0000f

Aug 2, 2015

Upgrade of Win7 HP laptop -- not usual failure code. Upgrade done through Windows Update (copy was reserved). Gets to 24%, restarts, bring up Recovery screen, fails with 0xc0000f -- a required device isn't connected.

Only one physical drive in the laptop -- works fine under Win7.

Have seen threads about problems with System Reserved being too small for Win10 (200MB for Win7 vs. 450MB for Win8). Tried shrinking C: and resizing System Reserved.

Repeats above problems -- plus, leaves laptop in weird mode with Win10 partially installed, a new Recovery partition, and nothing working (meaning, Win7 won't boot anymore).

Am now trying option of installing from DVD, after merging boot stuff into C: partition and removing System Reserved -- figuring that if Win10 requires a System Reserved partition, it knows how to create one the right size.

View 2 Replies

Installation :: Upgrade From 8.1 Fails At Copying Files (23%)

Jul 30, 2015

I tried updating my Win8.1 to Win10 twice.

The first time, it hung at 26% total, 89% copying files. Then it bricked my system completely so I made a clean install of Windows 8.1. There was nothing else installed than Windows & Updates.

Tried to update it with a stick made by the Media Creation Tool --> Stuck at 23%, 77% copying files.

I tried everything: Disabled Network Adapter, pulled all Cables (only mouse left) out, I also detached my second HDD.

I am trying to install Win10 on my SSD (Samsung 830 Pro, 130GB). I am running a Z77 Chipset.

I'd love to install completely new with the Image but that doesn't work because of the activation later on..

I'm stuck with a fresh Windows 8.1 install now, that's not really what I wanted. I'd love to update to 10 since I had it as a Insider too.

View 1 Replies

Installation :: Find Every Time It Gets To 32% Upgrade Fails

Aug 3, 2015

Have followed instructions & downloaded upgrade only to find every time it gets to 32% it fails & will not go any further, have done this four times outcome always the same, I have 74gb of hard drive free so there should be enough to accommodate the upgrade.

View 9 Replies

Installation :: Upgrade Fails At 38% Configure Devices

Aug 1, 2015

I have made 3 attempts at upgrading my Toshiba Satellite notebook from Windows 7 home premium to windows 10. Have tried both the upgrade sent via the Microsoft message and using the media creation tool. All 3 times it stopped in configuring devices at 38%, 47% overall progress. The setuperrlog.txt is:

2015-08-01 11:36:02, Error MOUPG CInstallUI::GetDefaultLanguage(1527): Result = 0x80070002[gle=0x00000002]
2015-08-01 11:36:02, Error MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
2015-08-01 12:34:18, Error MOUPG CSetupManager::GetDUSetupResults(4955): Result = 0x80070490
2015-08-01 12:34:19, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

[Code] .....

How I should try to proceed?

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved