Installation :: How To Change Boot Options Permanently
Feb 10, 2016
I am trying to have my computer boot Linux by default, from an external hard drive, while my internal drive has Windows 10 on it. Unfortunately I cannot get it to work: Windows 10 boots automatically at every restart and cold start.
Steps I've taken so far:
The boot order I want is set and saved in BIOS. There's no uEFI on my computer.
Windows 10 fast startup option is disabled. I also disabled the hibernation option just in case.
Still, I can only get Linux to boot by going into BIOS every time and selecting the (already selected) external hard drive again. When I then try to mount the internal (Win 10) disk from within Linux, I get an error saying it cannot be mounted because Windows 10 is still using it.
how to solve this and give full boot control back to BIOS?
My laptop is running on Window10 efficiently. Sometimes in order to check the DVDs and USBs bootability of newly created OS or Recovery Disk etc I have to select the relative option in the the bios. But on Lenovo G 50 70 the selected option is not permanent. You have to select boot priority option repeatedly for each and every USB/DVD that I want to check. Can i set these option permanently like:-
1st priority USB
2nd priority DVD
3rd priority HDD
4th priority Network IPV4
5th priority Network IPV6
There is a novo key to access the bios in Lenovo Laptop G 50 70.
New Dell XPS8700. Upgraded from Win 8.1 to Windows 10 and worked fine for about a month.
On start-up, it now hangs on the Dell logo or when trying boot options to start from USB or recovery DVD go to blank black screen. Dell phone support sucked but they sent me a recovery USB drive (to factory set Win 8.1), however start-up would still hang at the Dell logo. Tried all different boot combinations from CD/DVD, USB, OS/Boot partition but cannot proceed beyond Dell logo or black/blank screen. I do not have a original Windows 10 OS disc, however did a download from
HTML Code: [URL] .... to USB and PC does not boot up from that media either.
Used an original Windows 7 Ultimate installation CD to start and get to command prompt to recover files from C: drive and can browse through all folders and files. Copied user data to USB drive. So HDD appears OK.
I have purchased two licenses of Windows 10 Pro x64. Everything works fine, except for one disturbing elements.
I have an unsigned driver to a program that I use every day, so I have to boot in the "Disable Driver Signature Enforcement" mode every time, for the program to work. Yes, I have activated the old fashioned F8 boot menu, which is disabled by default in Windows 10. This is no problem, but it seems impossible to get Windows 10 to boot in this mode as standard.
In Windows 7 I solved it easily with the programs "Driver Signature Enforcement Overrider" or "ReadyDriver Plus", but none of these programs seem to work in Windows 10.
So my question is simply, how do I configure Windows 10 so that my computer will boot in the "Disable Driver Signature Enforcement" mode PERMANENTLY? Alternatively, configure the boot setting so that the boot menu (F8) appears by default every time I boot, so I don't always need to be prepared to throw myself on the F8 key at every startup.
I installed windows 7 as a dual boot with windows 10 (as I was having some compatibility problems with some programs) but now the boot UI has gone back to the old black text based UI.
I was just wondering is there a way to get the modern blue boot UI back?
On my Win 10 Pro X 64 Laptop I go to Internet Options and would like to change the home page but the option to "use current" is grayed out. I use Firefox as my default browser and it opens the home page I want but in Edge I open the page I want to be the home page and the option to change it is grayed out. Everything I have tried this option is never available. So, How do I change this? Get the button to "use current" to be not grayed out?
I am the only owner of my computer. And all the proxy options are grayed out.. ! "Some settings are managed by your organization" . I am using Windows 10 Pro.
My pc was installed with windows 10 dual boot with windows 7. After I removed windows 7 from harddisk somehow the dual boot options were not removed. I am still able to log into windows 10 but it is kind of disturbing. How should I completely remove the dual boot screen and log into win10 directly?
I cannot get to the advanced boot options menu that I could with windows 7 by hitting the f8 key. You know the menu that has safe mode with Command prompt safe mode with network support startup repair and Just regular safe mode. Use some of those features but I can't get to them the f8 does not work anymore.
Every time I try to boot into safe mode or advanced options I get the same BSOD ERROR: CRITICAL_PROCESS_DIED.. Is there any other way for me to accomplish this?
Basically when i go to turn on the PC it turns on and gets stuck on the screen where it tells me to push DEL or f2 to go to the bios settings. The problem with that is it wont let me access the settings at all when i push either of those buttons. So then I turn my PC off and then on again and it boots fine. Then I check for updates to see if it's some bug and I'm up to date. So I restart to see if the problem has been fixed. And it gives me the same frozen screen of the BIOS options. Then i turn it off and it boots fine, wash and repeat.
Build:
CPU- i5 4790k GPU- MSI GTX 970 MOBO- Asus Z97 RAM- Corsair Vengeance 2X8 GB PSU- Corsair 650 watt Memory- Samsung SSD 120GB, Western Digital Black 2 TB
I have installed win10 on to my Brothers PC and kept getting the message `Inaccessible Boot Device` and was caught in a loop. I then downloaded the iso file on to a disc and re-installed successfully from there. However when we switch on the PC I get a screen which shows two boxes, One reads Win10 and the other Windows. When I click on Win10 the OS loads. How do I remove the other box?. I have installed Win10 on two other PC`s and have not seen this screen before.
Have been running Windows 10 on a Packard Bell laptop since August and suddenly the login screen password box is disabled on start up. None of the sign in screen options (power options, language, etc.) are enabled. I can't get to any safe mode boot options either so at the moment I'm stuck.
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
Have a Lenovo H420 desktop that was upgraded about 2 months ago. We backed up everything and want to reinstall Windows 7.
But I can find no way to get into the Setup screen. I've gone to Settings, Update & Security, Advanced Startup and Restart Now. But I have no option to Use a Device. If I choose Troubleshoot then Advanced Options, the subsequent screen has no option for UEFI Firmware Settings.
I've disabled Fast Boot through Power Options in the Control Panel, then tried F2 and the Delete key when starting. Nothing...
The fact that I can't do something that was so easy in Windows 7 is enough reason in itself to remove 10. Throw in the fact that the scanner part of my printer no longer works is just icing on the cake. I have the Windows 7 disk. I just can't figure out how to use it.
