Installation :: How To Create A Bootable USB Drive For Bare Metal Install
Aug 1, 2015
I have been trying to create a USB installation drive. I have the Windows10 .iso image. I have created a recovery USB drive but it doesn't allow me to access the image just the advanced options. I want to be able to do a clean install of Windows 10. So:I want to boot to the USB stick
I want to be able to format my drives.I want to be able to install a clean copy of Window 10.I have searched and searched online but can't seem to find a solution.
View 9 Replies
Similar Messages:
Nov 10, 2015
Tried looking this up online, but couldn't find any specific information. I'm running on Windows 10 Home, and I have a Windows 10 ISO I want to put in a flash drive so it's bootable. How do I do this?
View 3 Replies
Jan 2, 2016
I bought Windows 10 for my new build. I didn't put a DVD drive in the computer because I knew I could boot from USB. How do I create a bootable USB drive with the Windows 10 CD? (I have a new USB with 16 gbs of storage)
View 1 Replies
Sep 1, 2015
So my sister's Windows 8.1 laptop's hard drive is broken... with her OS on it. I'm getting her a new hard drive (internal) which I will fit, but it seems pointless to buy windows all over again when she still owns it. I was thinking I could create a recovery drive from my pc (Win10) and install it on her new hard drive when it's fitted.
View 8 Replies
Feb 10, 2016
Here is the issue I am currently at:
I have a Surface Pro 4 that I want to set up a Dual Boot on. I normally wouldn't have too much of an issue resolving this on my own, but due to the Surface Pro 4 not supporting Legacy flash drives, my standard way (Booting into a MBR Flash Drive w/ an Offline OS on it and doing the defrag/moving the files to the beginning of the drive) of solving this issue has left me baffled. I've attempted downloading Rufus and utilizing a MBR ISO (Which failed, since it didn't have the EFI boot sector on it), going back and forth amongst various methods of removing secure boot (which was a doozy at first, after having to go through recovering my BitLocker key) in order to boot from legacy, all to no avail.
Basically, I want to take my SSD, and move all the files to the beginning, which I can't do in Windows due to system files being in use (Ironically, a large portion being near the end of the drive). All I am looking for is a method to create a bootable UEFI flash drive that I can use to defrag/do this from. I've dug a little bit around on Linux and didn't find anything that seemed to be able to do it, as most options seemed only relevant to Windows PCs. Is there any options available to do this? Or would formatting and reinstalling it be the only option?
View 9 Replies
Aug 6, 2015
I've always wondered this, since people have told me that you can't copy the files from an .iso and do a clean install of windows, since it is not "Bootable", but I've actually done it many times. Maybe I just don't understand what they mean by bootable?
My understanding is that it means the USB drive can be chosen in the Bios or in the boot menu to be booted from, which is what you have to do to do a clean install of windows, which I have done many times by just extracting the files from the ISO with daemon tools and copying them to a USB.
To clarify, I am not "Upgrading" by running the USB while logged into windows, I am going into the bios and selecting the USB drive to boot too, and it automatically starts the windows installation, where I can then format the drive and install windows to it. Am I not really making the USB bootable?
View 1 Replies
Feb 28, 2016
I am going to be installing an ssd into my laptop in the coming days and I am planning on using the windows 10 set up program to create a boot-able usb for installation. My laptop came with Windows 8 pre-installed and I updated it to Windows 10. If I do a fresh install to the ssd, will Windows recognise my PC and activate itself?
View 1 Replies
Nov 21, 2015
Does the Media Creation Tool create a bootable USB or DVD. If not how can I make it bootable?
View 3 Replies
Sep 1, 2015
I am building a new PC with no internal storage. I am installing a 2.5" SATA dock in one 3.5" bay and one 3.5" SATA dock in a second 5.25" bay.
My intention is to have one SSD for my work PC on Windows 10, one SSD for my son for his gaming on Windows 7 (some of his games are not Win 10 compatible yet), and perhaps a third SSD for playing around with Linux installs, etc.
The 3.5" dock will have a 1TB HDD for backup.
From what I have read, since these drives will not technically be external. (plugged into the SATA on the mainboard through the dock, and not via USB or e-sata.), that their creation and use could be problematic if I use the UEFI boot system, or secure boot for that matter.
So.... I am looking for a methodology which I should use to setup these boot SSDs which will give me the least problems and management issues.
A side related question. I have a boot SSD with Win 7 home premium that is eligible for Win 10 upgrade. It currently resides in my Dell Alienware x-51 R1 system, but I want to move it to the new system as the drive my son will be using.
Will there be any issues in moving the drive to a new system architecture?If/when he can upgrade to Win 10, will there be any issues with that since the architecture has changed from the system of origin?Do I need to backup/reformat/restore the drive in order to get it to boot properly in the above mentioned docking bay system?Since only one drive could be used at any one time. In your opinion, do you think I need multiple Windows Licenses?
View 2 Replies
Aug 7, 2015
My computer has been upgraded to Windows 10 and activated. I have a non-bootable DVD Windows 10 ISO. Is it possible to do a clean install with that non-bootable DVD disk? Any alternative to do a clean install?
Heard imgburn can create a bootable DVD ISO, but after downloading the software then found it is infected, and decided not to install it.
View 9 Replies
Jan 5, 2016
I have a dell inspiron 7000 and recently reinstalled windows 10 into my laptop after I received a system thread exception not handled error with a bootable usb. After painstakingly spending a whole day (10 hours) I succeeded in restoring my laptop with windows 10. Nevertheless, I accidentally restarted my laptop while the bootable usb is still in the usb drive and now my laptop does not even load/boot. The screen just freeze trying to load up the OS as in the spinning dots when the windows first loaded up, after 3 dots loaded, the whole screen freezes. in addition, when I try to load up windows repair, it'll load up an extra dot and freezes at 4 loading dots; I can't even load into the hard-drive through BIOS. The good thing is that I can still access the BIOS and do diagnostic test and all the stuff from BIOS. Other than that, I'm unable to access my computer.
View 1 Replies
Jul 29, 2015
Since windows 10 has been launched and it has already been downloaded on my PC and installed. I wanted to know how to create a boot-able DVD so that I can also install it later, you know like doing a completely fresh installation and having the windows staying activated. Cuz windows was upgraded to 10 from 8.1 and Microsoft didn't gave me any key, so if I install it again on the same device will it remain activated?
View 1 Replies
Jan 3, 2016
Had tried to update the BIOS on my son's Alienware Aurora R4 so that we could install an upgraded graphics card (980 Ti).
Used the Dell Support site - and was upgrading from Bios 7 to Bios 9 - would eventually go up to current version 11 before swapping GPU.
Followed all the steps on the Dell site - but afterwards - it acts like my hard drive has died (doubting this - have fairly new Samsung 512GB SSD as the only hard drive).
Computer boots into Bios now - but says "inaccessible boot device". My son had done the update from Windows 8 that came on the machine to Windows 10 - but apparently did not create a boot disk or USB drive.
Can I create a "generic" bootable USB on another computer - WITHOUT REINSTALLING WINDOWS? I do not want to lose info/settings on his machine if at all possible.
Waiting on Alienware Tech support to respond - machine is about 2.5 years old and out of warranty
View 5 Replies
Jan 9, 2016
Possible to Create a Bootable USB for Win. 10 on OS X Yosemite?And if so, how?
View 1 Replies
Jan 7, 2016
I'm upgrading my mom's laptop from windows 7 to windows 10. Since my last upgrade I seem to have misplaced my USB Stick that has the UEFI Windows 10 install media on it. I do, however, have a few DVDs lying around that are large enough to make a Installation DVD. If I use the Microsoft Windows 10 Media Creation tool, will it create a UEFI Installation DVD?
View 4 Replies
Oct 30, 2015
When I attempt to create a recovery drive, I get this message.
Recovery Drive
We can't create recovery drive
A problem occurred while creating a recovery drive.
What is the answer, as I have tried this several times.
View 11 Replies
Dec 18, 2015
I already have my pc updated with windows 10, I recently upgraded my hard drive with a samsung 850 pro ssd but i discovered that my recovery partition no longer works and when i try to do a system image windows says it cannot do it because files are missing . I used the samsung data migration software that came with my ssd, when i go to disk management it shows my three partitions which are
500mb recovery partition
260mb efi system partition
windows c 476.18 gb ntfs , boot,page file, crash dump, primary partition
My question is if I do a clean install of windows 10 will these partitions be created again during the windows 10 installation automatically or will I loose some . I want to be able to recover my pc should I need to and have everything working. Someone suggested that I don't need a recovery partition and windows 10 does not create new partitions .
I don't know what the efi system partition is and don't know if i need it . i have watched some youtube videos of people doing clean installs of windows 10 and they all seem to differ . during installation when given the choice of where to install windows some people delete all the partitions on their hard drive while others pick which one .
View 9 Replies
Mar 19, 2015
I am having a problem trying to get Windows 10 Build 10041 installed on one of my computers. I am getting an error message(see screenshot) trying to create the account on install. I do not have this problem on build 9926.
View 9 Replies
Nov 30, 2015
Is there anyway to create Windows USB drive from another PC without knowing ADMIN password?
View 9 Replies
Feb 2, 2016
I want to clean install Windows 10, and I already did that before using the tutorial here. But last time I did not have Ubuntu install.
And in the tutorial, you must delete all partitions in order for Windows to create the special necessary partitions (Recovery, MSR, MBR etc..)
But now that I have a Linux partition that I don't want to delete, and according to the tutorial, Windows installation will not create these partitions.
How can I manually create them? Is it simply allocating a space for them and naming them the proper way and Windows will know how to use them? Or there's more than that? Also, What happens if I do not have these partitions?
View 3 Replies
Jul 30, 2015
I originally made a USB key which booted fine, but could not install on any partition on two different PCs and 4 different drives. It gave the error message "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files." Tried different hard drives/partitions even a completely blank drive.
Did the usual wipe all partitions (on the two drives that are blank). I re-ran the MediaCreationToolx64 to make an ISO and now it is installing correctly. Is there a US English location I can download somebody's image of their USB drive or just try the 2 hour download again?
AND is their an explantion other than something went wrong creating the USBKEY? It is a brand new key (it is 3.0 but the ports are 2.0).
View 3 Replies
Jan 25, 2016
GOAL: Create a dualboot system with a clean WIndows 10 installation on SSD while keeping my regular Windows XP for as long as I need it.
SITUATION: Monoboot system booting Windows XP from a regular HD. I already purchased an SSD for Windows 10, but need to install it.
QUESTION: Which steps (and in which order) should I take to make my goal as stated above achievable without (too much) hassle. I was advised by a friend to simply install the SSD, then start installing Windows 10 and everything would be ok as W10 would recognise the existing XP installation.
View 9 Replies
Nov 15, 2015
I am currently running Win7 Ultimate service pack 1 and am trying to create an installation of Win10 on a flash drive before I replace some parts inside my PC that will require an OS refresh. Unfortunately I am stuck at this screen.
I am sure my OS version is activated and I have extracted my windows key via Magical Jelly Bean finder but it rejected that key.
P.S. any PC stats linked to this account are a different piece of hardware
View 9 Replies
Oct 4, 2015
I bought the Windows 10 USB drive version for my new PC, my old one has the technical preview which has expired and I can't upgrade to 10 since my base windows 7 was Ultimate N, is it possible to use my windows 10 USB drive (full version) to install Ubuntu on an old pc? If so, will there be any risk, void warranty, just break it entirely?
View 1 Replies
Aug 29, 2015
When I am trying to bootcamp my mac using a windows 10 iso file, it gets about the third of the way and says "your bootable usb drive could not be created. an error occurred while copying the windows installation files". I have tried to unmount it in disk utility but there is nothing to unmount ...
I am runnning the latest version of yosemite and my mac is mid 2012
View 1 Replies
Mar 4, 2016
I have been using windows 7 ultimate for more than 2 years and now I want to upgrade to windows 10. My friend recommended a clean install, gave me an iso for windows 10 enterprise, tell me to use a program called rufus and referred me to this tutorial
My question is: Is it better do a clean install or simply upgrade from the built-in windows update tool? Then, if I should do a clean install, is rufus the suitable tool for making bootable usb?
View 2 Replies
