Installation :: How To Install Win 7 On Second HD For Dual Booting
Feb 10, 2016
I have Windows 10 installed on HD1 (Samsung) and working will. I had a second HD2 (WD) with Win7 installed for a dual boot operation. For some reason, I could never successfully boot into Win7. Out of frustration I decided to format the Win7 drive and start over.
The problem now is I cannot install Win7 on the HD2 drive. When I choose F12 on boot up and select the WD disk, a screen appears saying "Windows Boot Manager" It instructs me to insert my Win7 install disk an reboot.
Next steps:
I insert the Win7 install disk and reboot using F12 to select the WD disk. The "Windows Boot Manager" screen appears again with the same instructions as above! If I reboot again and do nothing, the system will boot to Windows 10.
My question, how to install Win7 on the WD disk and then setup a dual boot operation?
View 7 Replies
Similar Messages:
Oct 15, 2015
I've just built my desktop and I'm trying to dual boot Windows 10 and Ubuntu 15.04.
I've already partitioned my hard drive, and installed Windows 10 and Ubuntu 15.04, but I'm trying to get to a place where I can choose what OS to start whenever I turn on my computer.
At the moment, I can run both Windows 10 and Ubuntu 15.04 if I go into the BIOS and rearrange my boot priorities, but that's just a huge hassle. Is there a convenient way to choose at startup, similar to how Windows 8 had this?
View 9 Replies
Jul 17, 2015
I have the ESD for Windows 10 built 10240 . I need to clean install it on a different drive and dual boot it with Windows 8.1. Can I simply boot with the 10 ISO (in UEFI boot) and clean install it on a different drive?
Would I then be able to dual boot it with my activated 8.1 copy?
View 2 Replies
Aug 17, 2015
I have dual booting setup on my pc my main system and my development system but to get the development system my computer first boots the main one then asks me which os i would if the main one it goes right to as it already loaded but if it is the development system it will restart and load that, so my pc has to boot twice. Is there a way from the main system some how i can restart straight to the other one. Both os are windows.
View 1 Replies
Nov 5, 2015
Just getting to grips with W10 and noticed that dual booting can be set up in System Configuration-boot. This was the case in XP, I think or was a previous version. Bit late now as I have easybcd on W7 drive. Before you ask I have never had a successful install where W10 finds W7 and displays that fancy box on start up.
View 8 Replies
May 17, 2015
I've decided that I would like to dual boot Windows 10 TP (I know im late to the game)
Now ive done dual booting before, but I was wondering if its any different, as my system has change to include a SSD which just has windows 7 and a HDD with my files.
If I just partition my HDD to a smaller size and install windows 10 on the other half of that partition will that work and not affect windows 7
View 3 Replies
Aug 16, 2015
I want to dual boot windows 7 and windows 10 on 2 separate hard drives.
View 9 Replies
Sep 27, 2015
I have 2 Windows 10 (7 Upgrades) Installed,
...I would like to set them up, so I can Dual Boot them, without re-installing them.
View 8 Replies
Aug 2, 2015
I got a HP Notebook yesterday that had Windows 8.1 on it. Today I decided I wanted to reinstall Windows 10 (not upgrade, but clean install) on it and I do have experience in reinstalling operating systems. I reinstalled Windows 10 from a USB stick and when the computer restarted after the installation was done, it would keep booting from the USB stick. I exited the installation screen and then went to the BIOS to change boot priority to "OS Manager", but all I got was an error which I don't remember what it said, and then it just restarted again.
So my question is, how can I get Windows 10 to boot after is has installed and restarted?This is my laptop: HP 15.6 Laptop - Black (Intel Celeron N3050 / 500GB HDD / 4GB RAM / Windows 8.1) : Laptops - Best Buy Canada
View 7 Replies
Sep 1, 2015
How do I set my BIOS to have the DVD boot and install Windows 10 in UEFI mode? I do see a setting on my Asus motherboard UEFI "CSM Compatability" and in there are three options:
UEFI and Legacy OPROM
Legacy OPROM only
UEFI only
Do I select UEFI only option here?
What is the benefit of installing in UEFI vs Legacy? All I understand is that the system sets up more partitions.
View 9 Replies
Aug 17, 2015
I have the Windows 10 Pro ISO with a Windows 10 key. (from MSDN)
I want to install Windows 10 as dual boot with Windows 8.1. Both are x64.
Is it possible to install Windows 10 from the ISO? I know you can upgrade that way. But I want to do a clean install AND install alongside Windows 8.1.
View 9 Replies
Aug 13, 2015
I have two systems.System 1 is a desktop running W7 Premium SP1. I did clean install of W10 from iso on separate partition. W10 will not activate using W7 numbers. I suspect that is because I moved W7 to an SSD 6 mos. ago and W10 expects the old HDD. BTW, installed W10 to partition on the SSD
System 2 is dual boot laptop (Dell Inspiron) with W7 SP1 and W8.1. I want to keep W7, and I could try W10 install either by upgrading 8.1 or clean install to the 8.1 partition. Reccomendations? I don't want to risk losing the W7. I do have disk image backups of both W7 and W8.1.
View 6 Replies
Dec 13, 2015
Read the tutorials but still not sure... I want to use my new SSD Win 10 Pro 64bit upgrade clean install via Brink's USB tutorial (when done setting everything up) and would like possibility to be able to dual boot with/to my old Win 7 Pro 64 SSD in same box.
Can this be done this way and what's the way to get the bios to play nice with the two Windows SSD operating systems ?
View 5 Replies
Aug 10, 2015
Just a few final comments about the free upgrade.
1. Upgrading does not allow an installation with dual boot option.
2. Windows 7 is gone after one month. If you don't like it, too bad.
3. My "legacy" Dell colour laser printer will not function with Windows 10. It works flawlessly with Windows 7 and getting a new printer gets rid of the saving plus a lot more than the savings of a free W10. I will pass on the "free" upgrade.
View 6 Replies
Sep 3, 2015
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
View 2 Replies
Jan 25, 2016
GOAL: Create a dualboot system with a clean WIndows 10 installation on SSD while keeping my regular Windows XP for as long as I need it.
SITUATION: Monoboot system booting Windows XP from a regular HD. I already purchased an SSD for Windows 10, but need to install it.
QUESTION: Which steps (and in which order) should I take to make my goal as stated above achievable without (too much) hassle. I was advised by a friend to simply install the SSD, then start installing Windows 10 and everything would be ok as W10 would recognise the existing XP installation.
View 9 Replies
Jun 17, 2015
I've installed W10 in my laptop in a dual boot configuration with W7 successfully. I used this tutorial Windows 10 - Dual Boot with Windows 7 or Windows 8 I'm setting up to do the same thing in my desktop and have a couple questions about drive letter designation after doing it. I created a 30G partition on the C drive of my desktop for the W10 install.
My laptop has one drive, the OS "C" drive, I created a another partition for W10, after installing W10 using the USB ISO "boot from USB" instruction when I'm in W10 it shows as the C drive, and the W7 partition is inactive D drive. Just the opposite when I'm in W7, it shows as the active C partition and W10 is the inactive D partition.
On my desktop I have the 120G C drive for W7, a 500G D drive for backups, a fixed CD-ROM E drive, and a virtual CD-ROM F drive. I've made a 30G partition on the C drive to install W10 on for the dual boot. The question is when the auto backup runs (I have it backup & image every Sunday at 7:00pm) it backs up the C drive to the D drive. Will the W10 dual boot install change my backup drive letter to something other than D, or will the non OS physical drives keep the same drive letter? I will have to remember to be in W7 for it to be the C drive when it backs up, but my concern was if the dual boot was going to change my backup drive to something other than D. That would affect the backup.
I've attached disk mgmt. below, FYI the G drive is the USB with the W10 ISO
View 1 Replies
May 20, 2015
Okay, I have Windows 10, and Macbook. My PC, have 2 hard disks, one is of 500 GB ( Seagate ) and one is 3 TB Western Digital (Black).
Machine is loaded with:
CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler
Motherboard: Asus MAXIMUS VII HERO ATX LGA1150 Motherboard
Memory: Corsair Vengeance Pro 8GB (2 x 4GB) DDR3-1866 Memory
Storage: Seagate Barracuda 500GB 3.5" 7200RPM Internal Hard Drive
Storage: Western Digital Caviar Black 3 TB 3.5" 7200RPM Internal Hard Drive
Video Card: Asus GeForce GTX 770 2GB DirectCU II Video Card
I am planning to Install Mac OS X on 500 GB one and keep Windows 10 on 3 TB one. So is it okay if I will just remove the 3 TB Hard disk, and install Mac OS X on it ? 500 GB hard disk have files of Windows 8.1 already. But it is not my primary hard disk.
View 1 Replies
Sep 16, 2015
At some point in the future I aim to upgrade from Windows 7 to Windows 10, but I'd like to keep Windows 7 on a dual boot or something similar (if possible) for convenience and in case of compatibility issues. However I also want to get a new motherboard and CPU, and from my limited understanding of operating systems that would cause problems for my OS and stored data and such. So I have decided to ask some questions.
1. Is a dual boot with Windows 10 and earlier versions of Windows actually possible, and how would I go about setting it up?
2. Would it be possible to dual boot the OS's across separate SSDs?
3. Is it possible to synchronise the desktop across both OS's?
4. If I have to do so, would deactivating and reinstalling a copy of Windows 7 as simple as following most of the steps in this guide?
5. If I have to deactivate and do a clean install of Windows 7, would it wipe all the files on that drive?
6. Would reinstalling Windows 7 be as simple as installing as normal and then entering my product key with no complications?
7. Is there anything else I should know or do before I start uninstalling and clean installing stuff?
View 1 Replies
Jun 15, 2015
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
View 9 Replies
Aug 24, 2015
I recently purchased G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBXL for my computer. I ran a memory test with memtest86+ and my old memory had 175 errors, which is not good. So I purchased the new ram, but when I installed it in my computer, the system turns on but Windows 10 will not boot.
Does this mean that the RAM is bad? I know that it's compatible because I narrowed my search down on NewEgg to RAM that was compatible with my motherboard. The one thing that I did notice is that my motherboard's manual says that it's compatible with 2 sticks of DRAM and the RAM that I purchased is SDRAM.
View 9 Replies
Feb 3, 2016
I did an update a week ago and after that Windows 10 will boot to black screen without cursor.
When booting I get sometimes "Automatic repairs", I see the initial logo. After some minutes the screen goes back and that's it.
When I try to boot from an USB the same happens - I cannot get even to re-install Windows. The USB works on another PC just fine.
I booted from Linux and deleted the hiberfil.sys file, checked all the partitions of the disk (in this case SSD) with GParted- no issues.
I really don't know how to get even to the advanced options and try to reset or run command prompt.
View 8 Replies
Sep 4, 2015
I built myself a new computer recently and it boots fine if I am booting into the bios. However when booting off my thumbdrive to install windows 10 it boot loops, getting the the windows symbol and then restarting.
My setup specs:
b85m-ds3h-a mobo
pentium g3258 cpu
msi 4gb gtx 960 gpu
hyperx fury 8gb 1866mhz kit
corsair cx500 psu
wd blu 1tb hdd
View 1 Replies
Oct 15, 2015
I am booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
Here are my specs
CPU: i7 6700K
MOBO: ASROCK Z170 K6
RAM: 2x8 DDR4
GPU: RADEON R290x
All that's plugged in is the ssd, monitor, ram, and keyboard/mouse ...
View 1 Replies
May 26, 2015
I want to purchase a copy of Windows 10 Pro. I currently own Windows 7 Ultimate. I do not want to lose Windows 7 Ultimate because I have games and other files that I am concerned will be incompatible with Windows 10 in the same way that they are incompatible with Windows 8.
My system specs:
Intel Core i7-4790K
Asus ROG Maximus VII HERO
Club3D R9 290
Samsung 840 EVO 250GB SSD
Western Digital Black 1TB WD1003FZEX
Asus DRW-24B1ST DVD-RW
G.Skill Trident X DDR3-1600 CL7
The 840 EVO has Windows 7 Ultimate installed on it. There are many basic programs installed to this drive, such as Microsoft Office, my Daemon Tools, Fraps, and other "mission-critical" things that I want to access quickly and reliably.
My mass storage drive is the Western Digital Black drive. All my games are stored there, as Steam has a folder it reads most of its games from. A few other large programs are stored there. It only has one partition.
What I've been thinking of doing is when Windows 10 comes out, I want to grab a 256GB Samsung SM951 M.2 drive for my Maximus VII Hero and install Windows 10 onto that. I'm hoping that way, I can access my games via either Windows 7 or Windows 10, so that if there's compatibility issues, I can boot to either Windows 7 or Windows 10 and not have to worry about being able to play my games. I don't really want to do the free upgrade path because I'm concerned that it will replace Windows 7. I don't want that.
I'm also wondering if I can still run the games on the WD Black from Windows 10 using Steam launching from the SM951, as I currently do with Windows 7 on the 840 EVO.
I'm pretty certain that I won't be able to access Microsoft Office, which is on the 840 EVO imbedded into Windows 7's Program files. Or will I?
View 1 Replies
Oct 11, 2015
I installed windows on my new hdd (because current is starting to fail). But when i have only that drive connected it just skips it and starts PXE over ipv4. Is there anything i need to do to make it bootable? PS. I had to install it on legacy support
View 9 Replies
