I no longer have access to the old computer.
From my internet reading it would appear that virtualization might be invovled and I've managed to install a virtual machine on the new computer, however, I've now hit a brick wall ..
The vhdx image file is on an external HD together with bu's of my data files (just to be on the safe side)
If I use the iso I installed on my computer to install on my dad's pc will that be ok as long as he uses his key when official release comes out?
View 4 RepliesHow do I remove a file called install.vhdx, it is left over by some software I installed and it will not delete.
View 1 RepliesI just purchased a new Dell desktop which was pre-loaded with Windows 10. All I have done to this point is activate and update Windows. I want to install a Samsung 850 EVO SSD and then make the HDD a storage drive. Would it be better to migrate Windows to the SSD or perform a fresh install by using the media creation tool?
View 3 Replieslast few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
Code:
dism /apply-image /imagefile:g:Sourcesinstall.wim /index:1 /applydir:w:dism /image:w: /set-Timezone:"Central Europe Standard Time"md T:RecoveryWindowsREattrib w:WindowsSystem32RecoveryWinre.wim -h -s -rcopy w:WindowsSystem32RecoveryWinre.wim T:RecoveryWindowsREwinre.wimbcdboot w:windows /s s: /f UEFIw:WindowsSystem32
eagentc /setreimage /path T:RecoveryWindowsRE /target w:Windows
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
I currently have Windows 8.1 Pro installed on my laptop and in the process of doing a clean install of Windows 10 Pro. Unfortunately the Media Creation Tool used for creating a Windows 10 ISO doesn't provide me with the option to choose the Pro version of W10 the only two options being Windows 10 and Windows 10 (N).
From browsing about I've learned that the Media Creation Tool is supposed to detect what Windows version you have installed and give the proper options, but I've double checked and my computer does indeed have W8.1 Pro installed on it. What I must do to install the Pro version of W10?
Recently I've changed my Mobo, CPU and RAM. Installed Windows 8 Pro Retail and upgraded to Windows 10 Pro. Worked perfectly and no problems
But I've noticed that if I need to restart the system I will get the usual Blue screen saying "Restarting", this will then goto a Black screen.
Nothing happens after the black screen, I never see my BIOS image or any text whatsoever (Which I usually see on a normal boot). IF I then press and hold the power button to force shutdown the computer and then press it again it will perform a normal boot, I see the BIOS Image etc.
i have a new lenovo laptop G50-80 comes with windows 10 home single language but the problem is my laptop running slow and i want to format and clean install windows 10 my self without loosing my original windows 10 so i want an iso image of my windows 10 so how to make an iso image of windows 10 in laptop but don't tell me recover your windows,restore your windows or factory reset windows because i tried everything but nothing was happening.
View 1 RepliesI have several machine running Windows 7 Professional that I want to upgrade to Windows 10. Question is can I upgrade 1 machine add my other programs Office etc , take an image and then use that image to upgrade the other machines. Adding a new machine using Win7 image was easy, install the image changes the license number for Win7 & Office reboot and that was it.
View 5 Repliesi decided to reinstall everything starting with windows 7 then upgrading or using the free upgrade that i initialy used to get windows 10. but it seems that offer is no longer on the start menu bar task bar.
i have the img of windows 10 pro burned from media creation tool to a dvd.
can i use the dvd to simply just upgrade windows 7 to windows 10?
or do i need a serial key for windows 10?
i had some trouble with curse client and some audio stuttering in windows 10 when i used the free upgrade, but it didn't show until after i installed call of duty black ops III where it said i needed audio below 44000khz (sound blaster Z) to be able to open the game....... : and a bunch of bsod out of nowhere. i havent had a bsod on windows 7 for over a year so idk where that came from.
is there a upgrade function from the dvd (windows 10 pro; as in the free upgrade) or do i need a serial specifically for win 10?
Is it possible to restore a Windows 10 system image taken from a 60Gb SSD to a new 240gb SSD on the same computer?
I am thinking of using the windows 10 installation USB to boot then repair to recover the image onto the 240Gb SSD.
Would this work? Does partition size affect the new 240Gb SSD?
The system is already licenced for Windows 10 and nothing has changed other than the SSD volume size..
The VERY last resort is to install over again with all programs, tweaks, etc..but, I'd rather not.
How do I reinstall Windows 10 from a USB Disk Image
View 2 RepliesI am planning on installing Windows 10, and I'am thinking of doing a clean install. So my question is if I create a system image of my current OS i.e. Win 8.1 will I be able to restore it on Windows 10? Because I do not want to install every software again.
View 2 RepliesSecond device just got win10 logo in taskbar yesterday, but now windows says my hdd has bad sectors and I cannot access it properly. I have a saved Macrium image I made several days ago. Can I put it onto a new SSD and will my existing valid keys still work so that I can get the upgrade?
View 7 RepliesI've downloaded the ISO image and tried to burn it to DVD only to find that is too large 5.6 GIG and doesn't fit on a 4.7 : is there a way to get it to fit or can I extract it to desktop and run it from there?
View 9 RepliesI have upgraded directly from a Windows Ten Pro ISO downloaded directly from Microsoft, but both sfc /scannow and Dism "restore heallth" run from an elevated prompt report that they cannot repair the image errors. Windows support simply says to "reset" from Update and Security from the Settings menu, but this machine was running CLEAN Windows 8.1 (sfc /scannow or DISM commands reported no errors) and resetting as they suggest will (at a minimum) mean that all of my installed software will be entirely lost.
I am desperate for a person proficient in restoring the integrity of a Windows Ten Pro image (have tried BOTH reinstalling directly from the downloaded ISO (multiple times and from re-downloaded ISO's and doing in-place upgrades). Both methods report the same errors upon reinstallation or in-place upgrade methods.
The running image is corrupt, corrupt, corrupt. What are the command(s) to restore it to health, as was the case with the previous clean 8.1 that was running before the upgrade???
Both Sfc /scannow and DISM restorehealth report that the image is repairable, but it is beyond my understanding how to do do.
I have an unallocated 1Mb partition as the first partition (according to Easus) on my laptop drive, in addition to the recommended reserved, system and EFI partitions. Could this extraneous partition be the reason for my inability to restore from an image backup? (Restores fail after making my laptop unbootable)...
View 9 RepliesFirst of all, I upgraded to windows 10 from windows 7. My device is a ASUS K55vd notebook. When I was running on windows 7 I successfully created a factory image disk via ASUS ai recovery application (a five bootable disk). Then I decided to upgrade my hdd to ssd. My idea is to have a clean factory installation of windows 7 on ssd so I didn't clone my old hdd.
What I did was mount the ssd and ran my recovery disk and successfully installed a fresh windows 7, it is then when I update my windows 7 and went to windows 10. Currently I'm running on windows 10 and there is the notification of creating a factory disk which I would like to do but as soon as I start burning the disk it says that the recovery partition does not exist even though I have my recovery drive ( R: ).
Next, I tried creating system repair disc from Control Panel>System and security>Backup and restore (windows 7) then this prompt came. "The selected disc cannot be used. The selected disc does not contain a valid Windows installation."
Lastly I tried creating system image also from Control Panel too. However it failed and says that the mounted backup volume is inaccessible.
In my reagentc /info:
In my disk management:
I would like to ask for some solution regarding that and I'm wondering if the previous factory image disc that I have from before (win 7) is still usable if I decided to factory reset my pc? And can I make a bootable disc in which it reverts my windows to the point where I freshly upgraded to windows 10 so that I would relieve myself the hassle of upgrading again to windows 10 when the factory image disc work (in which it will surely reverts my windows to win 7).
I have created a disk image of the system disk, C: with the disk image software in Win 10 backup. The system disk was 70GB with 40GB of files. When I tried to write the image to the SSD the Win 10 install software said the disk (120GB= 110GB) was too small. I reinstalled the windows disk booted and shrank the system disk to just under 60 GB and retried the process with the same result. System is Win 10 32 bit on an old Acer netbook.I would like to be able to transfer the installed files to the SSD.I have looked at the tutorials for creating a system image and also how to create hardware independent image for installing win 10
View 9 RepliesI have managed to create a USB pen drive to apply WIM images using the DISM Apply-image command in 64bit so I know it can be done but how to create a pen to apply 32bit WIM images
View 6 RepliesI created ISO disks for both my 32 bit and 64 bit systems at the MS download site. If I use the ISO disk instead of the Windows Update method, does the install still create the W7 image in case I want to go back to W7 after installing W10?
Also, do I boot from the disk or do I go into the ISO disk and click on Setup?
Using Windows 10 ADK v1511, how do I capture an image directly by saving it in an esd file?
Also, how do I add an image volume, to an esd file?
I am in the process of creating an Image of HP Pavillion DVT7 2200 Notebook now. getting some steps to follow to restore it. The Laptop I have Macrium Reflect running on now will have the HD replaced as it on the verge of failing hence why I'm doing doing.
I have physically swapped out the old HD with new HD? I will have Macrium Reflect Image contained on the root of a brand new 1 TB External drive. start at the point of turning the PC on for the first time and if I should have the External drive plugged in before I attempt to boot the laptop for the first time.
Using the Dism command in Windows ADK for Windows 10 v1511, it is possible to change the name and description of a volume image saved to a wim file?
If not, you can tell me the method more proper to do this avoiding the use of the old imageX command?
I tried one again to use Macrium to backup only C:, clean install then restore only C:.
Once again it did more that I asked it to and removed the 16MB partition created by the clean install.
After clean install I had this, 4 partitions on Disk 0 (SSD):
After restore I had this, 3 partitions o n Disk 0 (SSD):
I did not run the Macrium fix boot option after the restore so when I rebooted Win 10 ran Auto repair then the system booted up normally.
Why is Macrium doing this?
Guess I'll ask in the Macrium forum and see what I can find out.
The reason I'm doing this is is Shift Restart from Power is not working, it just boots normally.
I just redid the steps in Brink's tutorial to setup Recimage, then ran reagentc /setosimage /path "locationResetRecoveryImage" /index 1
I'll try Shift restart again now and see what happens.
Is it permitted to install the backup image of Windows 10 to a New bigger hard disk in the same PC. After that I will use the new hard disk only and format the old one.
View 5 Replies