failed to make a boot drive before downloading and installing Windows 10. I have tried going to the Windows media site but it won't let me do it. making a boot drive?
View 1 RepliesSo I have a 128gb 840 evo ssd as my C drive and then a WD caviar Blue as a mass storage drive . So with windows 10 just coming out and it being free I thought I would duel boot it with windows 7(currently running) and went and cleared out a bunch of old games and programs and ended up the 47 gb free so I would have space to make a partition and have a little room after that. then once I tried to shrink the volume it says the maximum i can shrink it is 129mb. so I tried on my HDD and it worked just fine being able to shrink it 600GB(the remaining storage).
System Specs
i5 4570k
EVGA GTX 760
128gb 840evo ssd
1tb WD Caviar Blue
EVGA supernova G2 750 watt
16gb corsair vengeance 1600 ddr3
I was going to make a USB Flash Drive to install windows 10 as described in tutorial by Brink. But I find that ISO has been removed?? Can I still make Flash Drive / How?:
View 2 RepliesI have a dell xps desktop. It came with a standard HDD with windows 10. I added an SSD when I bought it and have used that for the OS and applications, I was able to set it to boot to that drive, I formatted the HDD that came with the computer and used it as storage. This has been the case for around 3 months. Yesterday, the storage drive (the one that came with the OS and whatnot) was wiped with killdisk, not just re-formatted.
Once the kill disk was completed I was still using the internet as usual with the SSD, since I had it as primary. I noticed I didn't see the storage drive listed under computer, so I rebooted. Now, It wouldn't boot to the ssd because I assume the original HDD has the boot manager on it, but the whole disk was zero'd. I installed 8.1 onto the HDD. I can now see my 224gb SSD in disk management. I just want to know how to make the ssd the exclusive drive that runs the os, boot manager etc on this computer. Here is a pic of my disk management ....
I have just upgraded a machine from windows 8.1 to windows 10 and I can't make a rescue disk that will boot.
The creation of the disk goes perfectly, right to the end. And when I reboot the machine it says the disk is not bootable.
I tried other boot disks I have here and they all work. What am I missing on this Windows 10 system?
If I use Windows USB/DVD tool or Rufus to burn the Windows 10 ISO to my USB drive, would I be able to use the USB drive anymore, i.e. deleting files and putting other ones?
View 3 RepliesIn my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 RepliesI just bought a new 850 EVO and i am trying to make a clean install of windows 10 pro through my optical drive, not a usb drive. I turned bios to AHCI and everything seems fine. At least everything worked fine with windows 7. So the problem is that after the installation asked me for first time to restart my pc and i removed the DVD, then bios showed me that there is no Hard drive in my system, after making the AHCI checks.
View 1 RepliesI have just installed the free windows 10 upgrade from Windows 7 home premium. I have used the file history program to create a USB and a DVD recovery disk prior to creating a system image ( not done yet ) I tried to test the recovery but it does not boot the system. The system just continues to boot the Win 10 update. I have changed the boot order by using advanced options to get into the bios. I have put USB key in position 1 and USB cd/dvd in position 2. my System is a Samsung lap top RC530 with Legacy Bios. How can I check my recovery disks USB and DVD. The system just continues to boot as normal. The recovery disks completed ok with no error messages when creating.
when I press esc after pressing the power button all I see is the choice of the 2 internal devices CD/DVD and HDD.
I have set all my usb devices in boot order above these two but the USB is shown as NA.
I am using 64 GB USB 3.0 drive. Note though my computer only has USB 2 ports no USB 3.
I have also used Media Creation tool to create a Windows 10 installation media. It still failed to recognise the drive as a boot device. The Lap top can read the USB drive ok though just not boot from it.
How do I boot from dvd drive on HP laptop? According to Google it says press esc repeatedly and then f9. I did this and it did not work so I went into the BIOS and changed boot order to cd/dvd drive at the top but it will not boot do I have to press another key?
View 2 RepliesWhenever I try to install a 64 bit Windows 10 copy from a flash drive, I get stuck on the 4 blue squares, with no white dots spinning. Then after about 10 seconds the PC restarts. I have tried the official way with the media creation tool, I have tried just downloading the ISO and using a third party bootable USB maker, I have tried ISO's from pirate sites (yes, I know, not the best solution) but none of those worked. Every time I tried a different method I always fully formatted the USB drive. Oddly enough the 32 bit version worked once or twice but even that doesn't work anymore. My PC specs are quite good so I really don't know what's the issue. Btw im running a 120 GB AData SSD and a 1 TB Seagate hard drive.
View 5 RepliesAfter upgrade Dell Inspiron 580 to win 10 the system boot option F12 seems disabled and the box will not boot from the alternate drives (cd then USB) enabled on the motherboard. F2 still brings up the system motherboard edit.
The failure to boot from cd defeats my drive imaging backup software.
I am unable to find a secure boot option on the motherboard, so I suspect the issue is something else.
I've installed W10 in my laptop in a dual boot configuration with W7 successfully. I used this tutorial Windows 10 - Dual Boot with Windows 7 or Windows 8 I'm setting up to do the same thing in my desktop and have a couple questions about drive letter designation after doing it. I created a 30G partition on the C drive of my desktop for the W10 install.
My laptop has one drive, the OS "C" drive, I created a another partition for W10, after installing W10 using the USB ISO "boot from USB" instruction when I'm in W10 it shows as the C drive, and the W7 partition is inactive D drive. Just the opposite when I'm in W7, it shows as the active C partition and W10 is the inactive D partition.
On my desktop I have the 120G C drive for W7, a 500G D drive for backups, a fixed CD-ROM E drive, and a virtual CD-ROM F drive. I've made a 30G partition on the C drive to install W10 on for the dual boot. The question is when the auto backup runs (I have it backup & image every Sunday at 7:00pm) it backs up the C drive to the D drive. Will the W10 dual boot install change my backup drive letter to something other than D, or will the non OS physical drives keep the same drive letter? I will have to remember to be in W7 for it to be the C drive when it backs up, but my concern was if the dual boot was going to change my backup drive to something other than D. That would affect the backup.
I've attached disk mgmt. below, FYI the G drive is the USB with the W10 ISO
I have a dell inspiron 7000 and recently reinstalled windows 10 into my laptop after I received a system thread exception not handled error with a bootable usb. After painstakingly spending a whole day (10 hours) I succeeded in restoring my laptop with windows 10. Nevertheless, I accidentally restarted my laptop while the bootable usb is still in the usb drive and now my laptop does not even load/boot. The screen just freeze trying to load up the OS as in the spinning dots when the windows first loaded up, after 3 dots loaded, the whole screen freezes. in addition, when I try to load up windows repair, it'll load up an extra dot and freezes at 4 loading dots; I can't even load into the hard-drive through BIOS. The good thing is that I can still access the BIOS and do diagnostic test and all the stuff from BIOS. Other than that, I'm unable to access my computer.
View 1 RepliesOk so when i upgraded from Windows 10 my boot time was 23 seconds so that was fast, but after downloading the new nvidia driver for my GTX 970 my boot time is now really slow, i just turned on my PC right now and got my phone to see how fast it boots up and it booted up in 1 minute and 50 seconds and im like wtf why is it so slow and when i turn off my PC it usally takes 10 seconds but now its 20 seconds to turn it off. I want to know whats up with my PC...
View 1 RepliesI just built my first computer for gaming last night. Everything is perfect and up to date and things are running smoothly. I have a 250gb ssd as my primary drive and i would like to use my 2nd drive which is a 1tb hdd as my storage. I only want to use the ssd for my os.
The 2 drives are Samsung 850 EVO 250gb
Western Digital Black 1tb.
Windows 10 only makes USB recovery drives. How do I make a DVD repair or recovery drive?
View 1 RepliesHow do I prevent Windows 10 automatically download and install the updates during its installation?
View 6 RepliesI have two drives. One is an SDD, which is where my windows installation is. The other is an HDD, which is where I keep a lot of large files. Whenever I delete something on my HDD, Windows copies it onto my SSD before deleting it (by moving it to the recycle bin). I do not want this to happen. I want it to either move the recycle bin to my HDD or don't copy it into a recycle bin at all. How can I do this?
View 1 RepliesThe problem is when i installed my OS the reserved partition of OS automatically get created in different drive. I want to remove that drive(Drive 0) from my pc but without reserved partition im unable to boot my OS.
i want to remove the 750HDD(Disk 0) drive and want a make a reserved partition on my Disk 2. So i can boot my OS without Disk 0.
I am using Ubuntu Linux, and would like to use Windows 10 on a virtual machine using Virtualbox. My computer originally had Windows 8.1, which I upgraded to 10. I then installed Ubuntu Linux, so I currently have a dual boot setup. I would like to use Windows 10 on a virtual machine in Ubuntu. Is there any way to obtain the ISO without downloading it? I tried following the instructions on this site:
How to turn your Windows 10 upgrade files into an ISO disk image | ZDNet
After I followed these steps:
1. Go into "C:WindowsSoftwareDistributionDownload" and delete everything in that folder.
2. Now, run the command prompt as an administrator. Type in "wuauclt.exe /updatenow".
3. Go to your Control Panel > Windows Update and your Windows 10 should start re-downloading from scratch
Windows Update is stuck at 98% download of 2,085.1MB and won't stop downloading as I have task manager on. It's been over 4.2GB download and I'm afraid to stop it.
I have a problem with downloading Windows 10 Pro .ISO file. I tried to download it two times but every time media creation tool exits suddenly when it gets 98% without any error message or something! and the process in task manager is killed automatically,
View 3 RepliesI was downloading Windows 10 32-bit using the Media Creation Tool to my 16 GB pendrive which is empty. Right when it reached 100% it displayed "Something Happened". I found the temp file which I believe it downloaded, its called BIT52D1.
View 3 Replies