I recently updated from Win7 to Win10. Initially when updating I was encountering an error, which I resolved by splitting my SSD into 2 partitions using CMD (I found this information through other posts).
Now the SSD is in 2 partitions, one being the boot partition (C) and the other system partition (Y). Is it possible that these 2 partitions can be merged together?
While inslating Win10 i my new computer i made two partitions on the SSD, but this is giving me some problems of space, so i want to merge the C: disk with the F: disk (the D: disk is a hdd), in the C: disk i have the IOS and some other apps and the F: is empty. How to do this?
View 1 RepliesI have two partitions that I'd like to merge into one.
First, none of them has OS on it. I have Windows 10 and all software on SSD disk which is partition C. Partition E is for games and it's around 300 GB, while partition F is for other files and it's 700 GB. 1 TB drive in total.
I'd like to merge E and F partitions and keep the data on both. First I tried to keep both of them but shrink the F and extend E with unlocalized space, but for some reason Windows default software isn't allowing me to extend E with unlocalized space.
I'd like to know if there's any good and reliable software to merge those partitions and keep the data on merged partition. Shrinking F and extending E is also an option.
I have upgraded to Windows 10 a few months earlier from Windows 8.1, I have not checked my HDD arrangement after the upgrade. Now I can see that there are two partitions the "system reserved" and "recovery". Where these partitions came from? and Can I get red of them?
View 5 RepliesOn my laptop I have a 1 TB HDD and on that drive the usable space was formatted into 2 separate partitions. This doesn't work well for me and I would prefer to have just one partition with all of the usable space. So I've tried everything I can think of and for some reason I just can't get the partitions to merge or even delete the secondary partition and expand the one I want to use. I have some pictures below to show what's going on.
This one shows the two partitions that I want merged.
This next one shows that I cannot extend the partition even if the other partition was deleted and is unpartitioned space
This last one shows that even with a 3rd party software I get the same result as EaseUS Partition Master doesn't give me the option to merge or move/re-size the partition
So at this point I'm stumped and I don't understand why this won't work as I've done the same thing with many other computers easily in disk management.
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
I used MicroTool partition manager to delete the extra partitions on an OS drive with win10 (leaving just the main C partition on the drive), and now the laptop will not recognize the SSD with the OS on it, and obviously cannot boot. I also tried using the bootable partition recovery tool from MicroTool, but restoring the partitions also does not work, it will only allow one of the two partitions to be restored.
View 9 RepliesSo, currently, we're trying to dual-boot Windows 10 Technical Preview on a Toshiba laptop with Windows 8.1. We already got the partitioning set up and everything, but when trying to install, it says we can't install to a GBT partition, or something along the lines of that.
We went to try to install it the same way that you do for Windows 7 and everything else, but upon setting the disk drive to the boot device, it still loaded into Windows 8. After a little Google work, I found that Secure Boot must be turned off, and that the BIOS option has to be changed from UEFI to CSM. After doing that, we could boot into the Windows 10 disk. However, when trying to install it, it says "Windows cannot be installed on this disk. The selected disk is of the GPT partition style"
We would like to fix it, and I found a way to do so on a Microsoft forum, and that's as follows:
1. Boot up to installation DVD/CD.
2. Click install but don't follow through.
3. Press SHIFT-F10 to bring up console.
4. Type "diskpart"
5. Once inside diskpart type:
-> list disk (find the one you want to convert)
-> select disk 0 (select the one you want from the list)
-> convert mbr (should take a second or two)
-> quit
6. Continue with install
But I need to know if it will format the entire hard drive, as I'd prefer not to lose the data on the primary partition. If we can do it while only formatting the partition for Windows 10, that would be fine (as that's empty already anyway).
I have two systems.System 1 is a desktop running W7 Premium SP1. I did clean install of W10 from iso on separate partition. W10 will not activate using W7 numbers. I suspect that is because I moved W7 to an SSD 6 mos. ago and W10 expects the old HDD. BTW, installed W10 to partition on the SSD
System 2 is dual boot laptop (Dell Inspiron) with W7 SP1 and W8.1. I want to keep W7, and I could try W10 install either by upgrading 8.1 or clean install to the 8.1 partition. Reccomendations? I don't want to risk losing the W7. I do have disk image backups of both W7 and W8.1.
I currently dual boot win10 and win7, first time I have ever done a dual boot, and I am wondering if there is any way to hide drives in explorer to clean it up. it shows the system reserved drive and the windows drive for my other OS on both systems and I just want to clean it up, having 7 drives listed just looks cluttered
View 1 RepliesI installed Win 10 Enterprise Tech next to my main play of Win 8.1 Pro w/ WMC in a simplistic Dual Boot by slpitting my Intel X-25M 160GB SSD into two equal Partitions, C and D. I do realize that W10 is gonna be a bit rough around the edges and I've noticed that I( have the same Wallpaper fixed to both Start Screens no matter what I do to indivualize them. It would seem as if both Partitions are linked together, perhaps because I'm using only one (1) SSD to split the Partitions apart. Certainly not a biggie, but it's gotta be one of the damndest things I've seen on my Dell inspiron 1545 in some time. My guess is that this is a simple glitch of some sort.
View 6 RepliesI created a dual boot system quite some time ago and all was well until.RTM partition was completely up-to-date. I had recently updated to Windows 10 Build 10251 on the Insider partition.I turned the machine off on Sunday January 31, left town, and returned Saturday February 6. All was well with the dual boot when I turned the system off before leaving. When I turned the system on last night, it booted directly into the Insider Partition. There seems to be no option to boot into the RTM partition.
View 9 RepliesI have two hard drives (C: and E. Normally I have windows 10 installed on C: and just my documents on E: drive.
I had to reinstall windows. The reinstall put the Boot on C: and the System on E: drive. (See image.)
Is there any way of putting the system back on C: drive? (I didn't want to reformat both drives and reinstall windows again if I can avoid it.)
I have a dual boot system in the following configuration:
HDD-0 = Win7 OS, HDD-1 = Win7 OS, WinXP OS. I have successfully booted into each of these operating systems - and the Win7 OS on HDD-1 is an exact clone of the primary OS on HDD-0.
I just upgraded the Win7 OS on HDD-0 to Windows 10 using the "Get Windows 10" process. I now get the new blue Boot Manger screen with all three OS's listed and I can successfully boot into Windows 10 and Windows XP. But I cannot boot into the Win7 OS on HDD-1 (which I could before the Windows 10 upgrade). How the upgrade even knew about the other copy of Windows 7, since it was not active and lives on another HDD is beyond me.
One strange thing - if I do a cold startup (power on) I get the new Boot Manger screen. But if I do a Restart from Windows 10, I get the old, black & white boot manger screen - and it does list all three OS's correctly, too.
The error message I get when trying to open (boot) the Windows 7 OS is: "LogonUI.exc - Entry point not found. RtlReleasePath could not be located in the ntdll.dll" And, like others, I now get the black screen with "Windows 7, Build 7601 This copy of Windows is not genuine (but it was yesterday before the Windows 10 upgrade on the other HDD).
And like others, I can start the Crtl+Alt+Del to get the screen with users, Task Manger, etc. And, I can run all my applications by manually starting them in a New Task and browsing to the exe file - like Firefox.exe or Word.exe So, it looks like Windows 7 started and may be running. I just can't get into it.
I think both issues, the LogOn and the "Not Genuine" are both related to the Entry Point no located in the ntdll.dll.
At this point I really don't want to reload Windows 7 since it appears to be running and all the apps can be run manually.
All this happened after the upgrade of the other Win7 on HDD-0.
I'm wanting to reinstall Windows 10 on my SSD. Before I do I'll unplug the additional drives I have inside my PC for storage (E: onwards), to isolate the SSD. However, C: (disk1 in the screenshot below) has several partitions and unlabelled volumes that I'm guessing Windows created. Do I remove all of them during the install process?
View 4 RepliesI purchased a Dell Inspiron 15 7000 with a 120GB SSD and a 1TB hard disk. I have the OS on the SSD (C:) together with the programs. So far I have installed Office 365 and little else. I have moved the data directories from C:Users to the D: drive.
The laptop came with no CDs or OS disks and Dell tell me none are available so I have created a recovery USB disk. At the end of that process it informed me that I could now delete any recovery partitions on the boot drive to create extra disk space. On trying this the option failed "Unable to delete partition". The reason for doing this is to recover the drive space used by 3 of the 5 partitions on the SSD. They take up over 32GB of the 120GB I bought. I've never needed to use a recovery partition and would have no issue with having to do a full install from CD or USB in future.
Disk Management does not have a "Delete partition" option for any of the SSD partitions. Would a re-install from the recovery USB stick allow me to delete all partitions on the SSD before re-installing or would they just get created again?
I have windows 10 build 1511 on a USB stick made by windows media creation tool now when install windows the drive has zero partitions.
When i install the copy from the USB stick i end up with 3 partitions one is 450MB (recovery partition) and another partition at 100MB called (EFI System partition) and last partition is windows 10.
Now if i delete all the partitions and install windows 10 from the USB drive again i get two partitions one at 500MB called (System Reserved) and the windows 10 partition.
Why if i install windows 10 multiple times i get different partitions being made?
I would like it to only make the two partitions every time.
I have attached an image of my Disk Management screen. Disk 0 doesn't look right to me. Is there a problem here? if there is, how do I correct this? I am running W10 and the C drive is a Samsung SSD drive.
View 9 Repliesmy question is about Partitions in Windows 10.
I have three-
100MB (created from Windows 7, which I knew was needed for booting)
C Partition (Windows instllation)
450MB (created after upgrade)
So, do I still need the 100MB? and what is this new 450MB used for? Disk Management says that is empty. I don't want to delete anything for risk of making my system unbootable.
My single ssd has the partitions shown in the attached file. This notebook was converted to win 10 from 8.1. I want to merge C: and D: into one volume. However to do that it appears that I need to have them adjacent. I tried to move the two offending small partitions but can't. Better yet I would feel better about just deleting them . Is there a way to tell what is in them? I don't care about recovering to win 8.1.
View 6 RepliesI've upgraded from windows 8.1 with uefi bios, so basically now i can do clean install 10 without product key? But the real question is: My pc have 8 partitions, the primary one, 5 of recovery, 1 oem and 1 efi. Can i delete all partitions and create only one?
View 6 RepliesWindows 10 Pro
Biostar TZ77XE4
I have been able to "successfully" boot the CD Drive into UEFI mode to install Windows 10 onto my new 4TB SSHD, but I run into the error were it stats that the partitions are not in the recommended order, when the ONLY partitions on the disk are the primary and the "protective MBR" before it at slot 0. Now, when I am in windows for the first time everything seems fine, but as soon as I restart after doing basic setup, I run into an issue where I cannot browse any partitions (I try to open "This PC", but it acts like it is indexing indefinitely and I never see the drive listing).
It looks like Windows 10 may not be appropriately setting the order for the partitions. the moment I left my original installation on my 1TB HHD intact, so that I can still have an operating PC, and find out some info on this.
I have upgraded my Windows 8.1 system to Windows 10 through the Windows update app and have created an installation media USB stick. I want to clean install, something I am very familiar with, but not since the new uefi, gpt, legacy etc. that I'm not familiar with. If I do a clean install and delete the entire disk, Windows will create the partitions and install the necessary "data" to run the computer correctly? I don't need to save the data on the hidden partitions that are present now?
View 9 RepliesAs the title say, is there any workaround to avoid creating 4 different partitions during a clean install of Windows 10?
Here is a sample of what I mean:
[URL] ....
I think one is necessary and unavoidable (the MSR one), but the other ones should be used for optional services that you may not require, like restore etc.
I couldn't find a work around yesterday and in the end I gave up and accepted those 4 partitions...
I have a top spec HP Envy DV6 i7 laptop which had Windows 7 on it then upgraded to windows 8 then Windows 10. I have noticed that recently the machine has become really sluggish and Cortana is not working not matter what I try.
I have decided to clean install Windows 10 which I have on a USB stick but before I do that I noticed I have 8 partitions
See below:
What I want is to have just one partition and clean install Windows 10
So, how do I boot Windows from USB drive. How can I delete all the partitions and leave one...
After finishing the installation of the Threshold 2 update 10586.3, I seem to have grown an additional Recovery Partition.
How many of these do I need?
Will the excess one be deleted along with Windows.old after thirty days (or if I run Cleanmgr earlier)?