Installation :: How To Move OS To Another Drive
Jan 11, 2016How do you move your installation windows 10 to another drive? safest & easiest way?
Currently my OS win10 is on HDD, i want to move it into my new fresh SSD.
How do you move your installation windows 10 to another drive? safest & easiest way?
Currently my OS win10 is on HDD, i want to move it into my new fresh SSD.
Is it possible to move the entire "Users" directory from C drive to D drive and have it be recognized without doing anything special?
I do a system image of my C drive regularly but my D drive is continuously backed up to a local NAS and I would like my user information backed up the same way.
I'm trying to move all of my documents to a new hard drive and I successfully did it with all of them except for the "Music" folder; each time I try to move it to a new location I get this error message:
View 4 RepliesI've newly installed W10 Pro and am constantly being pestered with permission nags (see attached) while attempting to reorganise files within the Local Disk.
I've tried changing the User permissions via "Properties>Security" but encounter nothing but a load of error messages.
I upgraded from Windows 7, bypassing 8 entirely so I've never had to tackle this issue before. I'd like full access without annoying UAC-related notifications every two minutes!
I created the USB recovery drive successfully with the option "Back up system files to the recovery drive".
Since I needed the USB for another purpose, I transferred the files from the USB to a separate partition on an external HDD and made this drive bootable using YUMI.
So now, on the same laptop, I am able to boot to this new partition on my external HDD where windows recovery environment comes up just fine. I did not want to test the reset or refresh part. Out of curiosity, I clicked on the "System Restore" option on the advanced options screen. I got an error message "To use system restore, you must specify which Windows installation to restore. Restart this computer, select an operating system and then select System Restore"
is there a way to move the browsing cache from Microsoft Edge to a secondary drive?
View 3 RepliesIts a common issue, but a long time ago I have fixed this issue but i forgot how. I have already tried all the fixes I could find on the internet. I disabled "Allow the computer to turn off this device to save power" on every port, I also went to power settings and disabled use selective suspend setting on EVERY POWER PROFILE.
And i also updated the usb 3.0 extensible drivers and the intel series 8 intel chipset drivers. but everytime i plug my external HDD to my new laptop the first 3.0 port sometimes just keep connecting and disconnecting instantly, and on the second port it connects and stay connected but if i move a big file it will start flickering on and off ( small files i can move) and yes i know about the radiation that 3.0 devices output and i have moved the drive away from the laptop. last step is to disable wifi and try again.didnt work.
USB 2.0 ports work fine
I recently got an SSD, with my old HDD set as a storage. I was trying to move the quick navigation folders on the left of Windows Explorer from the SSD to the D: drive (HDD).
However, with the 'My Music' shortcut, I accidently moved it to just the D: drive, rather than a folder within the D: Drive. This means the 'My Music' now directs me to straight to the D: drive, and when I try and move it, Windows says access is denied.
Second PC with Win 7 Pro 32 bit was a struggle...but succeeded in Brinks clean install and activation of 10...but was a real struggle.
Now...how can I transfer the new 10 install on an HDD to a new Sata SSD in the same box ? So far haven't figured out how to make the SSD with an installed image of the new 10 install from HDD to boot from the Sata at PC startup ?
What am I doing wrong...and how do I get the SSD image of my new 10 clean install to boot from the SSD ?
I think it has to do with partitions and active Windows partition but don't remember what/how to change the boot disk to the new SSD....
I am looking forward to replace my laptop HDD with a SSD. My laptop is the Toshiba Satellite l70 pro 17.3". I have a basic idea of doing transferring windows 8 to an SSD but apparently it is harder to transfer Windows 10 to a SSD when compared to Windows 8 and 7.
View 9 RepliesI have a brand new Dell XPS 8700 with Win 8.1 Home installed, 1 TB hdd.
I want to update to Windows 10.
I have a 120GB SSD that I would like to use for the system.
Are there updates to 8.1 and related that should be done before upgrading to 10?
Should 8.1 be installed on the SSD before upgrading to 10? I have ordered the 8.1 install/re-install disks from Dell and they should be here in a few days if needed for this exercise.
Or if it is better to upgrade to 10 on the existing hdd, how do I re-install it on the SSD...
I am trying to make space on an empty partition as a temp backup before I install a fresh copy of 8.1 to upgrade to 10.
I'm using Mini Tools Partition Wizard 9 Free Edition. What I have looking at the partitions are, a C partition (700 gigs capacity), then a System Reserved partition (350 mb's) then a F drive with 100 gigs of unallocated space. Here is an illustration.
Disk 1 - { [700 gig C] [System Reserved] [100 gig F] }
I want to shrink my C drive by 100 gigs and then resize my 100 gig F partition so I will have 200 gigs of usable space for the backup - But I can't because somehow my System Reserved Partition is on the right side of the C partition between the C and the F. Normally this system reserved partition is on the left of the C partition.
I do not know how this partition got moved. I did have another partition set up after the C drive that I used to install the Win 10 preview on but I since have deleted that partition and edited the boot menu to reflect this in MsConfig. Perhaps Win 10 moved my System Reserved partition over?
When I had Windows 7, I had literally every single thing in My Documents. Every song, every file, every tax record, every picture...literally everything. That way, when I backed up my hard drive, I just plugged in the My Passport Ultra drive, synced it with My Documents, and everything backed up.
But in Windows 10, I'm seeing Frequent Folders that include ThisPCMusic and ThisPCDocuments. So I figured I would just drag the music folder into the Documents folder, and it would just create yet another subfolder within Documents (other subfolders within Documents include "Resume", "Travel Info," etc. So I figured "Music" would just be another subfolder, as was the case with my Windows 7 setup.
Instead, it made a copy of the music folder, which is not what I want. I want to actually migrate the Music folder into Documents as a subfolder. I thought that maybe I could just copy it over and delete the original Music folder, but what if the copy doesn't work because the original version has been wiped out.
So I recently formatted my Windows 8.1 system and installed Windows 10. But it seems that the setup decided to set my System parition to a separate HDD (G: ) and put the bootmgr and all the boot files there, instead of using the left-over 350MB System Reserved partition on my primary SSD that Windows 8.1 had used. So of course now if I removed that disk, I wouldn't be able to boot anymore.
So what'll be the best way to move all of the boot files and system partition setting back to my old 350MB System Reserved partition? Will I need to disconnect all the other drives and do a repair install of Windows 10? Or can I manually move the files and partition settings over? The old partition is still marked as Active, so maybe I can just move all the Boot related files from G: to the 350MB partition and it'll just work? Maybe mark G: as INACTIVE too
I upgraded my Bootcamp version of Windows 7 Ultimate to Windows 10 on my MacBook Air. The screen is cracked on my MacBook Air so I am trying to move Bootcamp to a new MacBook Pro. When I run Sysprep I am getting an error message that says Sysprep cannot run on an upgraded version of Windows.
My question is: If I purchase new Windows 10 Pro operating system, can I replace the upgraded Windows 10 product key with the new key and will it change the upgrade to a new installation of Windows 10. If it will do this, I can then run Sysprep and move Bootcamp to my new MacBook Pro.
I'm about to build my first desktop, and I have a laptop with Windows 10 (upgraded from 7 which it came with). I don't plan on using the laptop anymore, so is it possible to install the laptop's hard drive into the desktop then move the Windows install to an SSD? If not, should I just buy a Win10 key or would it be possible to contact Microsoft about transferring the OS over?
View 1 RepliesI have a Lenovo flex 2 laptop that is brand new and used to run windows 8.1 until earlier today.
I opted for the recommended win 10 upgrade, and things went smoothly until it was time to reboot.
The laptop begins to boot, I get to see the Lenovo start screen for a few seconds, and then it turns off before starting over again.
This loop has been going on for 8 hours, as of right now.
All attempts to access the boot menu via the F2, F8, F11, and F12 keys have failed, and the novo key has had no effect.
I am desperate at this point- the laptop is brand new. And now it is next to useless. No actual customer support is available in the country I live in. I just want a way to go back to win8.1.
I have 2 seperated (physically) SSD drives in my laptop.Previously I had windows 8.1 on one drive, and I installed windows 7 and upgraded it to windows 10 on the other SSD drive.I enjoyed windows 10, so I formatted the drive with the windows 8.1, but now suddenly my laptop says he can't find system drive, and I can't load the windows 10, althogh it was installed with no connection to the windows 8.1 and on another drive.
View 5 Replies I'm pretty sure I'll be upgrading my desktop this week while I'm on vacation. I've done my laptop with no problems at all, it's a Dell Latitude E6400 with Win7 Pro bought refurbished from Newegg. The laptop was a mid 2008 model and W10 works great on it.
My question is about my desktop drives, my OS drive is an SSD and my backup drive is an HDD. There is nothing but the backups and system image on the HDD, it is an inside the box drive connected to the second SATA on the MB. Is there a chance the W10 upgrade will put it's boot loader/manager on the backup drive?
I have seen posts where for best results, all drives except the one being upgraded/clean installed on should be disconnected to avoid the boot loader/manager showing up on another drive. I can do this but it's sort of a PIA due to pulling the tower out, disconnecting cables, and opening it up. Then repeating after the upgrade to put things back.
My backup drive is an HDD with nothing on it other than backups which are done every Sunday night. There is no OS on the backup HDD.
Background is, I created another partition on my 120G SSD (30G) where I've been dual booting 7 and the W10 TP's, the plan is to delete that partition and recover the space for the W10 upgrade. Then have a single partition with W10 on my 120G SSD C drive and to continue to use the WD 500G for backup and system image. I will create another partition on the backup HDD for the W10 backups (right now I'm using a 100G partition on the HDD for Win7) and keep the Win7 backup and image until I'm fully on and comfortable with W10.
I have windows 7 on a 750GB drive at the moment, but I want to install 10 on my SSD which only has 30 GB of space. Of course, I don't want to have to re-install all my data. If I go the upgrade route, will I have an option to choose which drive I install the windows files to?
View 8 RepliesMy laptop was upgraded from Win 7 to Win 10 in Dec 2015. The drive crashed last week and I am going to put a new one in. Will Win 10 find the COA from the previous install??
View 2 RepliesI have Windows 8.1 on a small hard drive, I am wondering can I upgrade my current installation to windows 10 on a larger hard drive and how would I do it.
View 1 RepliesI have a HP Pavilion 23 all in one PC (23-f221ea) and the 1TB hard disk is getting rather full.. I want to change for say a 4TB drive, I know that I can't clone my 1TB drive to the 4TB drive using something like Acronis as max is 2TB and the new 4TB drive will have to be GPT formatted. I have already updated my PC to W10 with the ISO disk I made from MS update.. Can I install the larger disk GPT formatted and install with the ISO disk I made??? Or will I have to start all again and install with Win8/8.1 first..??
View 9 RepliesI have windows 10 build 1511 on a USB stick made by windows media creation tool now when install windows the drive has zero partitions.
When i install the copy from the USB stick i end up with 3 partitions one is 450MB (recovery partition) and another partition at 100MB called (EFI System partition) and last partition is windows 10.
Now if i delete all the partitions and install windows 10 from the USB drive again i get two partitions one at 500MB called (System Reserved) and the windows 10 partition.
Why if i install windows 10 multiple times i get different partitions being made?
I would like it to only make the two partitions every time.
I am running Windows 7 Home Premium, yet I do NOT have a CD or DVD drive. Is it possible for me to upgrade to W10?
My W7 is not asking me to upgrade, how come?
So i have the latest windows 10 version, but i cannot seem to install apps to any where except the C drive. And the option to change is disabled. See image attached.
Why is it disabled? How do I get it to work ?
I am on windows 10 pro if that matters.