Installation :: How To Revert Back To Windows 8.1 On A Dell Venue 8 Pro
Sep 20, 2015
So I made the mistake of upgrading my Dell Venue 8 Pro to Windows 10... It's very slow and buggy.
I tried using the built in "Revert back to Windows 8.1" option in the Settings "app", but it says that files have been deleted and it can no longer perform the uninstallation.
I also tried going into the tablet's built in Backup and Recovery from Dell, but that doesn't allow me to reinstall Windows 8. It's merely a diagnostic.
View 9 Replies
Similar Messages:
Aug 1, 2015
I installed the upgrade to W10 and I think I should have waited. Things are slow to open and lockups, frozen screens and streaming problems are happening all the time. I see there is a go back to Windows 7 option and I may take it for now, and do a clean install at a later date.
View 2 Replies
Sep 24, 2015
I have tried upgrading my Dell venue 8 Pro many times from GWX, installation media and direct download in normal and also after reset of tablet with secure boot and also removing secure boot, removing fast boot and with fast boot using all permutations and combinations. Still I am unsuccessful. I am not finding any way to get support from Dell also. It goes to upgrade 91% always and then says going to reboot. But it reboots to windows 8.1.
View 9 Replies
Aug 7, 2015
My Windows 7 was updating to Windows 10. When it appeared to almost be done configuring a message appeared stating the Windows 10 could not be installed and it was restoring the previous version of Windows.
Well that did not work. The pc will not boot up now. Instead I get: "Windows could not start because the following file is missing or corrupt: <windows root>system32hal.dll Please reinstall a copy of the above file"
I hope I can add the file using the win7 dvd. I know I was getting low on hard drive space, but had cleared enough to have 4 gig or so free. It was either not mentioned anywhere or I missed how much hd space would be needed. Of course I am assuming that the install bombed due to this?
View 1 Replies
Nov 13, 2015
I just downloaded the update and when rebooted to install it. It got stuck at 40%. Is it the problem with Dell Venue Pro 8 in general or just me?
View 2 Replies
Sep 19, 2015
I was updating my Dell Venue Pro 8 to Windows 10 Build 10547 and got a red error message that read. "Secure Boot Violation" "Invalid signature detected. Check Secure Boot Policy in Setup". There is an OK button at the bottom of the message, but nothing happens when I try to click on it. I can shut the tablet off, but when I start it I get the same message. I am stuck. Where to I go from here.
View 6 Replies
Nov 11, 2015
I installed the Windows 10 update on the twenty-fourth of October this year. The first thing that I saw was a Rundll32 error or something. Next, OneDrive stopped working. A few days later, GTA V stopped working. Now, the Start Menu doesn't work, meaning if I click the Windows logo, it'll prompt me to sign out to "fix" the problem. So, I tried to go back to Windows 8.1 (64-bit flavor) one week after the update-a quarter of the deadline to update. Instead, apparently "the files that were needed to take you back were deleted", even though they're in plain sight according to file explorer-$SysReset, $WINDOWS.~RT, and $Windows.~WS I believe. Is there anyway that I can go back, or do I have to cough up another $90 to go back?
View 1 Replies
Nov 28, 2015
I have an OEM Gateway computer and I recently bought a new desktop on Black Friday. I want to revert my Gateway desktop back to Windows 7 and do a factory restart so I may sell it. However, when I try to download the iso from Microsoft, it tells me my key is an OEM one and to contact the manufacturer.
So I went to Gateways website and it says to press F8 during boot and do a bunch of stuff but pressing F8 when it says to does nothing and Windows 10 boots like normal.
View 1 Replies
Aug 10, 2015
When I started the recovery process to revert back to Windows 7, I saw a warning that I would need to reinstall some programs after reverting. I aborted at that point. What programs I would need to reinstall?
View 1 Replies
Aug 10, 2015
Just installed my Win 10 from Microsoft. All went well on the Venue 8 pro. Win 10 worked well with the Dell VN8P but if you put it to sleep by pressing the power button or it enters sleep itself after the time you set, it WILL NOT start back up when you press the power button. LED back light on but screen remains black.
You need to hold down the power button > 10 sec to shut down completely. The you can reboot and all works fine.
This was unacceptable for my use so for now I back out of Win 10 to Win 8.1 which works fine. Tried all kinds of Windows power settings and options. Nothing works.
View 4 Replies
Aug 19, 2015
want to switch back to Windows 7. However, my Start menu doesn't work. This proves to be very problematic, because the Settings menu within the Start menu seems to be the only path to reverting back to Windows 7. I've tried a few times to get my start menu back in order to restore Windows 7, but nothing I've tried has worked. Here's what I've tried:
(1) Entering a special command in Windows PowerShell [URL]..... Didn't work.
(2) Creating a new account with administrator privileges. Start menu works, but I can't use it to revert to Windows 7. I'm prompted to delete all other accounts created after the upgrade before reverting back to Windows 7.
(3) Accessing the Settings menu from within the Control Panel. Settings menu doesn't seem to be accessible from the Control Panel.
Is there a way to go back to Windows 7 without using the Start menu? I would rather not have to go find my original product key for Windows 7 and reinstall it, but if that's the only way, so be it.
View 1 Replies
Jan 27, 2016
I accidentally deleted my system back up for windows 8.1, because of my antivirus program, now i can't revert back to windows 8.1 form windows 10?
Because of my antivirus when cleaning it accidentally deleted my system back up for windows 8.1 ....
my laptop says we're sorry but we cant revert to your old windows because the necessary files we're deleted.
View 1 Replies
Aug 10, 2015
How to be able to get to the login screen and actually log in by booting through a USB. But then when I try to revert, it restarts and when it reboots. It gets locked in a screen that has a blue Windows logo and a black screen with nothing else.
View 3 Replies
Apr 7, 2016
I have a Dell 11 venue Pro (7140) tablet and I upgraded to windows 10. My tablet comes with 128Gb and I found out that I have many recovery partition. I am not sure which one I can remove it using DISKPART. Below is what I seen on the Disk Management Screen. Only C drive has volume label of C.
1. 500MB healthy EFI system (100% free)
2. 40 MB Healthy OEM Partition (100% free)
3. 2.00GB Healthy Recovery partition (100% free)
4. 109.56GB Healthy Boot, Page File, Crash Dump, Primary partition (40% free) Volume OS (C:)
5. 450 MB Healthy Recovery Partition (100% free)
6. 6.59 GB Healthy Recovery Partition (100% free)
View 3 Replies
Jun 15, 2015
I installed the technical preview on my Surface Pro (gen 1), It's great and all. Gets smoother with each update, however, I'd like to revert back to 8.1 pro so I can reserve my copy of Windows 10.
I don't exactly know if the tech preview will auto-update to the full OS when Win10 releases July29 and I've tried to search for an answer to that question and the answers I find refer to Microsoft releasing "ISOs" when the full OS comes out and I don't know how to do those things so that's why I want to revert back and reserve.
This is my first time trying out OS preview builds. I made a USB recovery drive before I installed it though. I tried using it to refresh my SurfacePro back to windows 8.1 using my USB recovery drive, but the only option I get when it comes to choosing a target operating system to refresh is just windows 10.
View 2 Replies
Aug 11, 2015
Recently upgraded to w10 from w8.1 via the upgrade option, then proceeded to make a USB boot with w10 and performed a clean install.
However, something is fishy with my system and w10 so for now i want to revert back to w8.1 via a clean install of w8.1
When i installed w10 however i noticed i have an abundance of partitions, and preferably i would only like to have my SSD and HDD as optional storage spaces. I do of course not want to delete any necessary recovery or system partitions, but to me it seems like i currently have too many.
Which of the partitions in the picture below can i delete? Is it safe to delete all the recovery partitions when clean installing w8.1 from usb? meaning that will the installation create the necessary partitions required by windows?
See picture for info(gjenoppretting = recovery)
View 3 Replies
Dec 23, 2015
After upgrading my Surface Pro from W8.1 to W10, I have discovered the hard way that Windows 10, even in tablet mode, is not touch-centric. (I also think that the W10 UI is much more cluttered by comparison, but I realize that that is a matter of taste.)
How can I revert my Surface Pro from W10 back to W8.1?
View 1 Replies
Feb 10, 2016
When I try to customize my font size display settings (see attached), they revert back to default after a reboot.
I did a fresh install of Win 10, and this was the first thing I checked, just to make sure nothing was interfering with it.
View 6 Replies
Aug 12, 2015
Win 10 not working. Went to settings to revert to win 8. The settings screen will not pop up other than an instant flash.
Problems with 10- won't let me sign in to outlook (outlook wont respond). wont let me connect a monitor. typing delay. no settings screen. won't let me open downloads from internet. no email unless i sign in from chrome search engine.
How do i revert without a settings screen?
View 1 Replies
Aug 3, 2015
For a couple of days, I am trying every solution from this forum, for windows 10 upgrade on my laptop Dell 15 L502x (early 2011) with windows 7 Home Premium. I tryed via Windows upgrade system tray icon (after restart - black screen,mouse pointer), then I tryed wit ISO on dvd/USB, same problem. After that I have disable one graphic card, then another, in both cases, same problem. Every time(when black screen come) I tryed with CTRL and then type password - no result. I have updated all my drivers, all updates are downloaded,
View 9 Replies
Aug 2, 2015
I have attempted to download windows 10 around 4/5 times, the download completes and states that my computer needs to restart upon which it claims it is configuring the windows 10 upgrade. I would assume from this point it would restart into the windows 10 configuration however each time I have tried it it restarts back into windows 8 as if nothing had happened.
My laptop then opens up windows update and says I am able to download windows 10. This is really frustrating as I can't even seem to get into the windows 10 setup.
As you can see I am attempting to download again but there is no trace at all of it attempting to install windows other than this failed update that you can see here.
I am using an HP Pavillion 15-n268a laptop.
View 9 Replies
Oct 19, 2015
Its been more than a month that i have updated my Pc to windows 10, and i actually dont like it at all so i need to find a way to go back to windows 8.1 without losing data like Steam games and pictures and more.
View 8 Replies
Oct 8, 2015
I had just installed windows 10 on my pc. I just want to know,if i go back to windows 8.1 will the installed applications that I had on windows 8.1 still be installed if i revert back to my previous windows 8.1.
When I installed windows 10 I used an installation disk and not the upgrade option. The previous windows I had was windows Single Language and the one I have now is Windows Pro.
View 9 Replies
Aug 17, 2015
I have been running Windows 10 Pro on my HP desktop for overa week with no problems. Over theweekend Windows attempted installing an upgrade; not sure when, but during theupgrade process I received a Critical Process Died BSOD with no error code. All system restarts result in the same error, and I havebeen unable to use Repair, Recovery Mode, or Safe mode to isolate theproblem.
The only usable option seems tobe to do a System Restore where I have the choice of losing all installed apps,or losing both all installed apps and files. Is there any way to roll back to the Windows 8.1 that isstill located in the Windows.old folder from the command prompt?
View 6 Replies
Oct 10, 2015
When I try to install windows 10 into my newly built pc, everything goes normally... then it says that the pc need to reboot, and it does. After the reboot, the windows logo appears and it brings me back to the windows installation process.
View 1 Replies
Oct 10, 2015
I like Windows 10 but it caused too many problems, so I used the option to revert to Windows 7. This has also meant a return to getting insistent messages wanting me to install Windows 10 again (and on one occasion, an attempt to install it without my permission). My question is, if I do reinstall Windows 10 and run into the same problems, will I have the option to return to Windows 7 a second time?
View 3 Replies
