I did a reset on my windows 10 laptop and since then when I turn on the computer, a blue screen appears which says inaccessible boot device and the computer restarts itself and the blue screen agin.. I tried to creat media creation on a memory stick and boot the computer from stick, but the memory stick is not recognised, the only option in the boot menu is windows boot manager.
View 5 Replies
I had a virus in my laptop so I reset my laptop to find that it's stuck in the INACCESIBLE_BOOT_DEVICE loop. I don't have any Windows disk to put into my laptop. My laptop is an Asus g750jx.
View 1 Repliesso I went from windows 7 to windows 10 reason behind it was because being new.. I thought I would reset everything as it was going slow and now it is just showing the
inaccessible boot device
I am trying to change the settings on the esc start up but it's not showing things I can change?
I upgraded from Windows 8.1 to Windows 10 a little over a week ago, and was experiencing a few issues, so I decided to do a reset, choosing the option to keep files yet remove apps and settings. The reset reached 100% and the PC restarted, but I got an "invalid boot device" error saying that the system must restart. After restarting, all that appears is a black screen, with no options available. I've tried numerous keys but nothing happens. The computer just sits on a blank screen.
I have a Gateway SX2110-UB25 that is merely two years old, that came with Windows 8 but upgraded to 8.1 prior to upgrading to 10.
CPU/GPU: AMD A10-7850K
MOBO: MSI A78M-E35
SSD: SanDisk Plus 120GB
RAM: EVGA 8GB 2133MHz
PSU: EVGA 80+ 430W
Monitor: Acer G237HL bi
I installed Windows 7 Home Basic and did all Windows updates; this went fine. Reserved Windows 10 and downloaded/installed it when it was ready; this went fine. Once in Windows 10, tried to "reset this pc" by choosing "remove everything" and "just remove my files"; this went fine until doing a restart after reaching 100%. This issue being the "inaccessible_boot_device" error that many others have gotten which causes the PC to enter a restart loop.
Well, during this loop I made the (apparent) mistake of turning off my PC. Now, I can't even boot my PC at all. I get a black screen. I can't use the Windows 7 disc, can't use my MOBO disc, can't even boot into bios... nothing. All I see when I turn on my PC is literally a black screen with nothing on it.
What can be done to fix this? I've read that putting Windows 10 on a USB by using the Microsoft media creation tool and booting from that to clean install works, but if I can't even boot from the Windows 7 disc, how can I boot from a USB? And I can't even enter BIOS to force a USB boot.
My PC will now boot into the "inaccessible_boot_device" error blue screen and does the restart loop. Not sure what I should do now. I'm afraid to power off my PC again.
Not sure why, but I was finally able to boot into BIOS. My only guess would be that, maybe when I tried(but failed) to remove my MOBO battery, just from me wiggling it caused it to reset? Idk.
Anyway, once in BIOS, I changed boot priority to DVD and was able to access reinstalling Windows 7. I am right now reinstalling Windows 7, on Disk 0 Partition 2(if that matters. wouldn't even allow me to install on partition 1 or 3).
So, from the looks of things, everything is back to normal? I should be able to finish reinstalling Windows 7, do the updates and redownload/reinstall Windows 10 without issue? Though, this time I will NOT attempt to "reset this pc".
I'm back into Windows 10. So, I'm still not sure why I was finally able to boot into BIOS, but once I was able to, I changed DVD boot drive to top priority and was able to reinstall Windows 7 from the disc. I then did all Windows Updates. I then downloaded the Windows 10 ISO and mounted/installed it with Virtual Clone Drive. I am now back inside Windows 10, hoping nothing else goes wrong.
I am converting an existing Windows 10 Pro laptop to RAID 0 - and I keep getting to the final boot where it says INACCESSIBLE_BOOT_DEVICE. What am I doing wrong? The laptop has two 1 TB Samsung 850 SSDs that are identical. Laptop is a HP Zbook 17.
Here are my steps:
1. Made a good System Image of C: drive on separate external SSD drive connected by USB. D: drive didn't have anything on it to be saved.
2. Used Win 10 Pro DVD to delete all partitions/format drives.
3. Went into BIOS and changed from AHCI to RAID, and also to turn on ability to do Control-I to get to Intel RST ROM.
4. Rebooted, did Control-I, created a RAID 0 of the two disks.
5. Rebooted, installed Windows 10 fresh. Verified it would reboot on its own.
6. Rebooted, went into Repair on Windows 10 DVD. Selected external SSD image to do image restore from.
7. Rebooted - verified on Control-I that the RAID 0 array is listed as "bootable"
8. Rebooted - get INACCESSIBLE_BOOT_DEVICE.
The place it dies - I see the little Windows 10 blue window, and the spinning circle at the bottom - then I get the blue screen with the message.
in windows 10 when I trying to safely eject the USB it says that the USB device is already in use (which is not )and if I'm removing it forcely the pc freeze and I'm getting the bsod with the error: inaccessible boot device and then my pc turning off I tried to format but it still happing I had no choice to go back to win 8.1 and there everything good (also it happing with some USB devices but some are working to but still .
View 1 RepliesOk recently my pc has been crashing like crazy and I got tired of it so I decided to reset my pc (I have windows 10) but after I did so it would try to restart and it kept saying it ran into a problem (INACCESSIBLE BOOT DEVICE) and it would reset again and it would keep doing that in an endless loop.
So I figured all the crashing before was because of motherboard. Gigabyte ATX Socket AM3+ AMD 970 Chipset. So I recently bought a new motherboard.A MSI 970 Gaming mother board. But its still keeps showing the screen that keeps saying it ran into a problem (INACCESSIBLE BOOT DEVICE) in a endless loop. Does this mean I need a brand new clean hard drive that doesn’t have windows installed on it so it can act like a brand new computer or what?
I recently purchased an SSD and installed it on my computer it is a Samsung 850 Pro. I used the Data Migration tool to clone my OS and then shutdown. I switched my current drive with it and turned the pc back on and got the INACCESSIBLE_BOOT_DEVICE error.
View 1 Repliesthe other day I realized I had a keylogger on my PC. I decided to use the windows 10 feature to wipe my HDD, deleting all the programs and installing win10 fresh again. After being finished with the restore, I booted my pc and was greeted to a message that said: something went wrong blah blah, with "INACCESSIBLE_BOOT_DEVICE" being the subtitle. I've tried rebooting my computer numerous times but no results. I've tried changing boot orders and shit in BIOS settings, to boot from USB but that didn't work either..
View 1 RepliesToday I tried to copy my windows 10 ssd to a new ssd I used macrium reflex 6 and image for windows the last version
After the boot, I disconnected my other drivers ,but i got inaccessible boot device I can't boot anymore...
Does restore an image of windows 10 to a new ssd ? I tried macrium bootloader fix without luck...
Quite frequently my Windows 10 Home dektop pc does not restart properly I get the blue screen and it says it will restart for me but generally does not but gives me the error message "Inaccessible Boot Device" It does not always do that but quite frequently.
I just restarted 3 times without a hitch but the fourth time it gave me the "Blue Screen Problem We Will Restart For You Error Inaccessible Boot Device" This time it actually went right ahead and restarted. It usually does not do that so readily.
My current hard drive is failing and, since I have two brand new identical hard drives lying around, I decided to do a RAID 0 set-up. I went into the BIOS and set SATA 1-4 as RAID and 5-6 as IDE. I left the Raid ROM as Legacy. I then went into the RAID set-up and turned both hdds into a RAID 0. I then inserted my usb stick with Windows 10 and started the installation process. The installer saw the raid without any issues, installed windows, and then rebooted. Unfortunately, it was at this time the error in the title appeared. No matter what I did, it would not stop producing the error. Even attempting to boot to my previous hdd (which was not included in the raid set), would produce the same error. The only way to stop it was to turn off the raid and completely remove all of the raid set partitions. This allowed me to boot into my old drive at least.
Specs:
Operating System Windows 10 Pro 64-bit
CPU AMD FX-812034 °C Zambezi 32nm Technology
RAM 32.0GB Dual-Channel DDR3 @ 2400MHz (11-11-11-28)
Motherboard ASUSTeK COMPUTER INC. CROSSHAIR V FORMULA-Z (Socket 942)28 °C
Graphics G276HL (1920x1080@60Hz) 2047MB NVIDIA GeForce GTX 750 Ti (EVGA)28 °C
Storage
465GB Seagate ST9500325AS (SATA)26 °C
1397GB Western Digital WDC WD15EARS-00Z5B1 (SATA)33 °C
465GB Seagate ST9500325AS (SATA)24 °C
298GB Seagate ST3320620AS (SATA)32 °C
232GB Maxtor 6L250S0 (SATA)35 °C
7GB Memorex TRAVELDRIVE 005B USB Device (USB)
Optical Drives HL-DT-ST BD-RE WH12LS30
I can not provide a crash log or a screen shot because I can not get past the Repair/Diagnose loop.
My Windows 10 pro has been running just fine until yesterday when I did an update. After the update and reboot, I get stuck in a loop stating the system cant start because of "Inaccessible boot device". It goes thru a process of restarting itself and self diagnostics and repair, but it keeps looping without fixing itself. I do get to select options such as boot up in safe mode but it wont, it goes back in that loop. I can boot into the Bios, I have an SSD that has always been set to ACHI mode, and it is. I just cant get out of this loop?
The only fortunate thing is that I have backup image files, so I do a quick secure erase of the SSD and reload the image fresh. All goes well until I do the Windows update, then reboot into this problem. I disabled Updates for the moment and spent a lot of hours on Google and YouTube, nothing I found so far has worked, so I figured I would try a fresh start here.
After upgrade to windows 10 it is not starting up ..it is in never ending loops of restart .it shows inaccessible boot device.. What to do now?
View 7 RepliesAfter resetting my Microsoft windows 10, an error - inaccessible boot device appeared
View 4 RepliesI had a pretty much faultless Win 10 setup with all the latest patches installed then this morning I connected an external USB hard drive which I had used several times before but this time Windows said it needed to install a new driver. I let the driver install and then Windows stated it needed a restart to complete the installation.
When restarting I received the "Inaccessible_Boot_Device error message - Windows will restart for you" message. On restarting again I got: "Your PC couldn't start properly. Error code 0xc0000001." Windows tried to automatically repair itself displaying the Diagnosing message first and then Attempting Repair message, and finally reporting it could not fix the problem. I'm not sure if the new driver being installed created the problem or whether it was just a coincidence and something else has caused the fault.
I was able to boot to Recovery using a USB stick created with Microsoft's MediaCreationTool. Safe boot and all the other startup options didn't do anything apart from resulting in yet another failed boot. Getting to the command line, I was able to view the file that Windows creates when it tries to repair itself: c:windowssystem32logfilessrtsrttail.txt. That file shows that all tests were completed successfully until:
"Root cause found. A patch is preventing the system from starting
Repair action system files integrity check and repair
Result failed error code 0x490"
I tried: sfc /scannow and got:
"Verification 100% complete, Windows resource protection could not perform the requested operation"
I then tried sfc /verifyonly and got:
"Windows resource protection found integrity violations. Details are included in the cbs.log. Note that logging is currently not supported in offline servicing scenarios."
As the message suggested, no cbs.log files were created.
I have tried:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
which all complete successfully but doesn't work.
Also tried chkdsk which didn't find any errors and:
bootsect /nt60 ALL
which again seems to complete successfully but doesn't work.
I managed to upgrade from 8.1 to 10 with no issues, but I wanted a clean install - so I went through the reset process.
Unfortunately now it is stuck on a restart loop.
I get the message
"Your PC ran into a problem and needs to restart, we will restart for you
if you need to know more you can search later for this error: Inaccessible_device_error
I'm going to create an 8.1 usb with the media creation tool (tried to do one for 10, but this failed during verification.
So, I wanted to reset my pc via windows 10 and everything was ok untill the resetting got stuck on 99% and I restarted my pc.
Now when i start my pc I cant press f8 and get into advanced boot options and when windows starts up It says INACCESSIBLE_BOOT_DEVICE. Your PC ran into a problem and needs to restart. and then windows keeps restarting my pc for no reason.
I do not have a windows CD. I can only get into my ASROCK Bios
I upgraded from windows 7 to windows 10. After experiencing some problems I thought the laptop might run faster if I simply reset it. I picked the option to remove all personal files since everything is backed up anyway. After resetting my PC boots up, goes to a blue screen where it says it can't start up with the error "INACCESSABLE_BOOT_DEVICE" then restarts and does this process again.
My laptop has pretty good specs so it should have been running faster than it was and I am now stuck as to what to do.
I have a laptop Asus n550jk cn015h with the original windows 8.1 license. I passed to windows 10 few weeks ago and I tried to completely reset it to fix some problems I had. I used the windows 10 reset function and there wasn't anything plugged. It took a couple of hours then it just turn off.when I tried to turn it on it appeared the blue screen page with inaccessible boot device but the laptop is not restarting as I learnt from people having the same problem,it just says that it's gonna restart but it turns off. Every time I try to restart the laptop it always appears the blue screen page and it turns off after a few seconds.
View 1 RepliesI tried to update my Windows 8.1 installation on my Thinkpad T61p to Windows 10. It went smoothly until it finished copying the files (75% complete). It is now rebooting in an endless loop (reboot -> Windows logo with spinning circle -> black screen -> Windows logo with spinning circle -> 75% complete message -> reboot) and I don't know what is causing the problem. I have installed the latest BIOS and tried various changes to BIOS settings with no effect. Does the installer write any kind of diagnostic log that would tell me the reason for the reboot loop?
View 7 RepliesOk so basically, after successfully installing windows 10 from windows 7, I decided to clean my hard drive and reset windows because I deleted my "edge" and thus my apps were not working. The problem then started, the reset went fine until it reached 64% and read "configuring settings" then it just restarted my PC and went in a loop like this;
>startup
>bios screen (Asus/Intel)
>monitor turns off
>monitor turns back on
>blue win10 logo and loading circle
>black screen for 5-10 secs
>install screen displaying 64%
>restarts and loops
How to be able to get to the login screen and actually log in by booting through a USB. But then when I try to revert, it restarts and when it reboots. It gets locked in a screen that has a blue Windows logo and a black screen with nothing else.
View 3 RepliesEarlier this afternoon I decided to reset Windows 10 as I had a problem with BSOD BAD_POOL_CALLING over and over again. I booted in Safe Mode, went to Advanced Options and so on. It wasn't a factory-new reset, just the one that removes all files, app data, etc. I left it for a while and came back to find it hadn't worked; there was an error message that read 'There was a problem whilst restarting your PC'. I tried again and the error message appeared again. Because of this, I decided to exit and continue to Windows 10 and see if it had done anything.
Now, when I try to boot my PC up, the circle that usually rotates on the 'Zoostorm' screen when loading doesn't appear. The PC then reboots and tries again, again and again, but with no success. I have tried turning off and on, and even unplugging everything, however nothing seems to work. My PC is now stuck in a continuous reboot loop and won't load. Unfortunately, I can't press F8 or Shift + F8 when booting to start Safe Mode. I have never made a recovery drive for Windows 10 and I don't think my computer came with a repair disk.
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
