Upgrading an old PC from 7 to 10 last night but desperate to get to bed and it had got to asking me to name the computer and I didn't have a keyboard connected so shut down. Now it is hung at ' Just a moment' with stars circling?
View 9 Replies
I've been stuck here for about 30 minutes. I did set up the Win 10 preview on another laptop (this one) and I don't remember it taking so long. In fact I'm using that and Explorer to type this. What should I do next, try to reboot and use the Win ten preview USB to "Repair" the OS before trying to restart it - or just restart it, or just start over?
View 3 RepliesAm trying to install build 10074 on a freshly formatted (no dual boot) 256GB SSD in my Dell XPS 12 via USB. I get through the installation, reboot, do the initial setup, provide my MS account, then get stuck. White screen with frozen ball circle and "Just a moment..." displayed.
View 9 RepliesI've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor
last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
Code:
dism /apply-image /imagefile:g:Sourcesinstall.wim /index:1 /applydir:w:dism /image:w: /set-Timezone:"Central Europe Standard Time"md T:RecoveryWindowsREattrib w:WindowsSystem32RecoveryWinre.wim -h -s -rcopy w:WindowsSystem32RecoveryWinre.wim T:RecoveryWindowsREwinre.wimbcdboot w:windows /s s: /f UEFIw:WindowsSystem32
eagentc /setreimage /path T:RecoveryWindowsRE /target w:Windows
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
Upgrading from windows 7 to 10, started install at around 10:30am and left it....around 2:30pm it started the large circle with the % in the centre, and again left it for another hour or so and came back to a black screen, no cursor or anything.
I waited until about 7:30 and still nothing and did a reboot by holding the power button down. On restarting, I get the windows 10 logo with the spinning dots, and then it cuts to black with no cursor. The CPU light does what it would usually do on startup, and when it first cuts to black but then the screen seems to change to a different black (if that makes sense?!) and the light only blips extremely quickly with a long period before it blips again
i know this is another update gone wrong post but I can't seem to find any with the same problem, just similar ones. I've read it can take a long time, but it's been nearly 11 hours and is very frustrating!
i'm not mega pc savvy, I get 2 options when I boot, and I've looked and there's no option for me to do a safe boot, or to revert back go windows 7. If I leave it on black screen for too long it automatically goes into sleep mode.
Is it advisable to set the UEFI BIOS (Asus ROG Hero Maximus VI motherboard) to a factory default settings before installing Windows 10? Or should I at least set the memory "XMP" profile?
View 3 RepliesFor those people who CLEAN installed Win 10 using the Media Creation Tool, will it automatically update to Threshold-2 (version 1511 Build 10586.36) through Windows Update once installation had been completed? Or does that have to downloaded separately?
And what is the "KB" Number for version 1511 Threshold-2?
i'm having an issue with my laptop, i think it's something called a memory leak because my RAM won't go below 80% even when my laptop is idle. I've been searching the internet for answers on how to fix this problem but didn't find any luck. I've already wasted an entire day trying to figure out how to fix this, I even tried to do a system restore but i forgot to save any restore points. I'm hoping Resetting/Refreshing would be the answer but i'm facing another problem; My media installation tool or USB Bootable Drive (I don't know if they're the same. It's what i used when i installed Windows 10) is that of a previous Windows 10 version & build. Would it work If i use it to Reset my laptop? I'm currently using the latest version, build 10586.36.
View 1 RepliesI recently made a clean install of Windows 10. However when I reboot I noticed that the Wi-Fi tray icon wasn't showing any menu. I click it and nothing happened. No list was shown, the only way to connect was to go to This PC Configuration --- Internet & Networks --- Wi-Fi.
Wi-Fi tray icon, battery and volume don't work. I don't know what to do. I search about it and found something about resetting explorer.exe, I try that but didn't work.
I have 2 seperated (physically) SSD drives in my laptop.Previously I had windows 8.1 on one drive, and I installed windows 7 and upgraded it to windows 10 on the other SSD drive.I enjoyed windows 10, so I formatted the drive with the windows 8.1, but now suddenly my laptop says he can't find system drive, and I can't load the windows 10, althogh it was installed with no connection to the windows 8.1 and on another drive.
View 5 RepliesI have been trying for hours to install windows 10 home on my newly built PC but i can't because there is a problem. I bought the usb version since i don't have an optical drive bay.
The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.
I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!
I have made a video showing what happens (win 10): OS installation problem - YouTube
I also made a video that shows my BIOS: Gigabyte GA-Z170X-Gaming 3 BIOS - YouTube
The download of w10 got completed and the installation after 95% restarts and says restoring your previous version. now it is again downloading the 2700 MB.
View 1 RepliesI currently plan on doing a clean install on a new ssd of Windows 10. My current mobo is a ASUS P8z68-V which has UEFI so I plan on doing a UEFI installation of Windows 10. However, I plan on getting a new processor and motherboard sometime in the future, so would I have to do a reinstall of Windows 10 when I get my new motherboard, or could I expect it to boot up normally as would a traditional BIOS system would work?
View 4 RepliesI've a dual boot Windows 8 and Windows 10 pro 64 bit notebook. I've lost - after having installed an application Screencamera - the possibility to boot to Windows 10 (even in Safe node!) so in order to regain access to it I'd try to make a repair installation; the tutorial I've read here is for a repair from within windows; I wonder how to do the same (or how to fix) from outside it?
View 9 RepliesHow do I prevent Windows 10 automatically download and install the updates during its installation?
View 6 RepliesI just installed Windows 10 over my Windows 7 Pro installation. Everything seemed to go well. I can see most of my stuff migrated (background, start menu items, etc.). BUT one thing that I was sure should migrate didn't - my Internet Explorer Favorites are nowhere to be found in the Windows 10 installation.
It took some digging, but I discovered that IE is still installed in Windows 10. Clicking the ... button gives you the option to "open with Internet Explorer".
To migrate your favorites from IE to Edge, click the ... button in Edge and go to Settings. You will have an option to "Import favorites from another browser" - and IE is one of the "other browsers" available.
I have just downloaded Windows 10 and it says "preparing for Installation" and is taking too long.
View 5 RepliesIm not trying to do anything illegal or anything but i want to create a skipable installation iso. Ive been able to successfully do this with windows 8/8.1. The reason for me to do this is I work at a computer repair shop and we do a lot of installs. To keep up a fast pace i find it easier to skip the product key initially and activate it later. I cant seem to find the ei.efg file to edit. Perhaps they changed the format of the install.
[URL]
I am referring to this tool.
View 4 RepliesWhen I try to install Windows 10 update, the installation freezes at 91% Setting configuration. (67% overall). I do not get any error message. I have tried various ways, Clean boot, Media creation tool etc. I have left the computer 4 hours in case it was not frozen, even though I could not detect any HDD activity.
The machine does not revert back to windows 7 as it says it is doing, but instead I get a black scree telling me status 0xC000000e . "Info boot selection failed because a required device is inaccessible." Looking this up it would seem to indicate the winload exe is missing or corrupt. I do not have any problem booting up my machine, normally, but was wondering, if it could be that, there is something wrong with my MBR and that is why, perhaps ( I am clutching at straws) windows 10 will not install.
The windows rescue disk, does not get me back, as when asking for a repair, there is no C drive showing, so I revert to my good old Acronis software. Without which I would be in big trouble.
During the first three attempts at installing windows 10, the process has frozen at 32% total installation and 6% on the "drivers and features" section. The entire process freezes and no animations play. No errors, after reboot from the freeze it just puts my OS back to Win 7.
View 9 RepliesI have a Samsung laptop running windows 8.1 which I am trying to update to Windows 10. The update downloads fine, installs as it should and then reboots my machine as if it wants to start into Windows 10 for the first time.The problem I face is that the machine seems to lock up on the blue windows 10 logo, the hard drive stops spinning on the laptop and nothing happens.The only thing that you can do is crash the machine by switching off the power, the laptop then boots back into Windows 8.1 as if it was never upgraded
View 6 RepliesI have a desktop PC running 8.1 x64. I decided to upgrade using Windows Update to 10. The files are downloaded with no problems, and then it asks for reboot. And when installing the system, the process stuck at 12% (copying files 42%). It just stays there for hours. If I force a reboot, the operation starts to revert to 8.1, and when it finally boots, I see this error: C1900101-2000D.
I haven't found much information about the error, I've tried the installation for a couple of times now, and I'm getting a bit desperate.
Im having trouble with my Windows 10 clean install. Once it installs it says it is resetting to complete installation, after it resets it will not load to the windows screen. It just loads bios and hangs with a prompt flashing on a black screen. I then used DISKPART to clean the disks and tried a new install in MBR and again in GPT formats, still the same result. What am I doing wrong? Are the RAID drives causing the problem? The machine was running fine before. I had a free upgrade from 7 and did the process of upgrading to 10 first before the clean install to activate the product. That went fine. I ran the hardware diagnostics from the BIOS and it failed the boot test with error code BIOHD3. Warning: No active partitions.
The machine is a HP with a
HP: Cleveland-GL8 Motherboard
Intel H67 Chipset
Intel i7-2600
9GB DDR3-1333MHz SDRAM [3 DIMMs]
1TB RAID 0 (2 x 500GB SATA HDDs)
1GB DDR3 AMD Radeon HD 6570
Yes, Which installation method shall i use to evaluate?
I have 2 physical drives, a C: drive with my windows 7 and i have a D: storage drive.
I would like to try Win 10 without affecting AT ALL my beloved win 7. Shall i install Win 10 in the D: drive?
