I am using Sony VGN-150J with Windows 7, I tried to install windows 10 through online update but it was stuck @ installing featured and Drivers after completing 6%, I wait for more than 8hrs and then restarted my laptop.
I tried with ISO image as well and get the same result it stuck @ installing featured and Drivers
I have a desktop PC running 8.1 x64. I decided to upgrade using Windows Update to 10. The files are downloaded with no problems, and then it asks for reboot. And when installing the system, the process stuck at 12% (copying files 42%). It just stays there for hours. If I force a reboot, the operation starts to revert to 8.1, and when it finally boots, I see this error: C1900101-2000D.
I haven't found much information about the error, I've tried the installation for a couple of times now, and I'm getting a bit desperate.
I downloaded Windows 10 on July 29th, and decided to upgrade instead of doing a fresh install of Windows 10. However, I realized that many of my old programs from Windows 7 are not compatible, so today I decided to finally do a fresh install of Windows. The reset was stuck at 1% for about 20 minutes, and now it's been stuck at 2% for over an hour.
View 3 RepliesI downloaded Windows 10 on July 29th, and decided to upgrade instead of doing a fresh install of Windows 10. However, I realized that many of my old programs from Windows 7 are not compatible, so today I decided to finally do a fresh install of Windows. The reset was stuck at 1% for about 20 minutes, and now it's been stuck at 2% for over an hour.
View 3 RepliesI think my windows 10 upgrade gets stuck at 92% with configuring windows at 69%. It's been at this screen for over 24 hours already. I'm a bit concerned now.
I'm wondering if I shut it down by pressing and holding the power button, would I get myself into another problem?
I've tried installing a few times, and every time it gets to 75% with 1% in configuring settings. It'll stay like that for hours, so I've forced shutdown and restarted. It reverts to Win8.1, and in Windows Update it says there was an important update that didn't complete, error code: "WindowsUpdate_C1900101 OR WindowsUpdate_dt000". It starts downloading Windows 10 and we go around again.
View 9 RepliesI got my free upgrade to Windows 10 and I tried installing it. But it got stuck at 24%, copying new files 83%.
View 2 RepliesI have done the update once, waited around 2/3 hours. i then reset my PC. i then did the update again, waited at least 5 hours. still stuck at 32% if there is a fix for this, i will do anything. i have a brother who did this update. My laptop is a pavilion 15 8gb ram radeon hd 7600g win 8.1
View 1 RepliesI upgraded from Windows 7 to Windows 10 at the first opportunity on July 30 after registering with Microsoft. The upgrade appeared to progress smoothly and I was able to boot the computer to see the new desktop screen. However, very soon after this first boot, the computer asked me to restart to finish the upgrade. This I did and my computer has since been rendered unusable. Every time I boot, the computer gets stuck on the welcome screen. It displays the generic circular user icon, with my name written underneath and the word "Welcome" written underneath this. The animated "computer working" icon (the little dots which rotate again and again) is displayed next to this. However, it never goes away. I left the computer for 12 hours and nothing changed (the little dots kept on rotating all the while). The computer otherwise appears fine (ie. the multimedia buttons at the top of the keyboard work fine) but the OS cannot get past this screen, no matter what I do.
I have unplugged all USB devices. I have tried booting with the power cable in and out. I have gone into the Advanced tab of the setup menu and disabled (and re-enabled) things like Bluetooth and Wi-Fi top test if this makes a difference. Nothing does. As things currently stand, I am completely unable to use my computer and all my files are stranded. Several of them are desperately needed.
I have tried pressing F8 to boot the computer in safe mode, but this doesn't seem to work (it results in a back lit but otherwise black screen).
I had reserved a copy of windows 10 and i was able to download it through windows update. once it is downloaded i was asked to restart for updating. copying files stuck at 0% for 5 min and windows 7 ultimate x64 rolls back.
I can even see an error message in windows update page shows Windows 10 Pro installation failed error 80070006
I recently upgraded my Windows 7 PC to Windows 10 using Windows Update. The whole process was smooth. I never really ran into any problem. Because the PC is so relatively old, I decided to delete all files and reinstall windows 10 using the windows 10 feature 'Reset This PC' to start fresh and theoretically faster. During the reset when Windows is installing my drivers, I noticed that the screen is plain black - no mouse pointer and the amount of reset finished(in percentage) is not also shown. The screen is just plain black. I am pretty sure that both the monitor and CPU is on. I've tried waiting for atleast an hour. I turned my pc's monitor on and off - nothing happened. So I have to resort to hard reset/reboot coz I cannot really see anything on my screen.
When I turned the power of the CPU back, it gave me the error 'The computer restarted unexpectedly or encountered an unexpected error. To install Windows, click ok to restart the computer and restart the installation'. I pressed OK but after restarting, it gave me the same error over and over again. I tried the solution in this website ( during installation of windows | HERESJAKEN), and it got rid of the error. However, I am stuck yet again in a loop that continues to just restart my PC when they reach the screen that tells you how much of the reset is finished, in my case, im stuck at 64% of the reset. That screen is shown for like merely 2 seconds, then the PC will just restart again, then show the "Reset progress screen" again for 2 seconds then PC will just restart again, over and over. I think the only solution is to start the reset of the PC again, but I dont know how.
So I upgraded my Pc from Windows 7 to Windows 10 then i wanted to make a recovery because my Pc was full of Crap... It was loading and it went to about 30 % then it jumped back to 2 % and now it isnt loading any further.
View 1 RepliesDownloaded the iso and all seemed good , the compatible report said all was good . But now on the upgrade it has been stuck at 34 % for around 1 hr . I do have the circle with the little circles spinning ?
View 1 RepliesIf I go to Windows Update and click on 'Advanced Options' it shows that I am in the 'Slow' lane. I can change this to 'Fast', but if I leave this page and then return it just show 'Slow' again. I don't get build 10130
There is a line in red at the top which reads 'Some settings are managed by your organization.' Who ever that might be for a home computer!
I am upgrading from Windows 7 to a pc but it seems to be stuck looking for updates. should I start again? Well, I am starting over but was wondering if I could do something different to avoid the problem.
View 8 RepliesI installed win 10 and failed to reboot. On resetting it stopped at 66% for long time. What to do?
View 1 RepliesWindows 10 is set to automatic updates. It was trying to get the Windows Defender Update KB2267602 for two days but the message was always "waiting for server". This has now disappeared from the update screen and does not appear on the installed updates. Is this a problem?
View 2 RepliesI downloaded windows 10 ISO(I purchased it) file and created bootable DVD and USB using Rufus. I want to install windows 10 in one of the system which had corrupted windows 7 in SSD(No data or nothing is required)
My system config is below
Intel i5(4th gen)
Gigabyte H87 D3H(which has UEFI) and flashed to version 9
Nvidia 9400 GT(driver not updated but the site listing says it is compatible with win 10)
8GB RAM
SSD(60 GB, which has corrupted win 7)
HDD(500 GB)
Believe I have the minimum system requirement to install Windows 10?After selecting cd/dvd/usb, windows 10 logo appears(without any spinning dots, just plain logo) and get stuck there. I waited for 1-2 hour but nothing happened. I searched and some of them have suggested to remove components and keep only bare minimum. So I tried removing GFX card and the HDD, and kept only SSD(default changed to IGFX).
But even then it doesnt move forward from the windows logo screen. how to move this installation further? Any debugging options? Anything I am missing here? I purchased it and hence I dont want to waste the money I spent on it.I checked in BIOS and I can confirm that Fast boot is disabled or Data Execution Prevention and/or similar options are enabled.
To confim whether my bootable DVD/USB had some errors in initiating setup, I tried running setup.exe within my friends machine(win 7) and it is launching and giving me screens to download updates and/or to enter product key. Images attached which gives indication that setup is launching.
But when I try to run the setup as bootable DVD/USB I get the blue logo screen and nothing happens.(even no spinning dots below logo and/or errors to share) Refer Image - Win10_Bootable_DVD.jpg
I've been trying to update my windows 8.1 to Windows 10 for at least 10 times now and it always stuck at around 60% It reboots itself a few times and it always comes back to the circle screen with the % progress but getting around 60% it reboots and it gets stuck there... black screen, no cursor, no sound.
I've tried to plug it into a secondary screen thru hdmi but nothings happens; also I've uninstalled my antivirus since I've read it might be the problem but it didn't work..
I've got a Dell Inspiron 7537 Windows 8.1 x64 Intel Core i7, 8gb ram, Intel HD Graphics 2gb + Nvidia Geforce
I have three computers in family that were given upgrades on the win7 family plan. One was just informed it was eligible for win10 upgrade. I think I made the mistake of custom install (for a clean install) instead of an upgrade and, related to other problems with windows update, I might have lost my activation on win7. Long story short, when I got to the point where win10 was installed and asking for a key I knew I had done a no no as, if I had done it correctly, I should not have been asked for a key. Of course I have no key but the win7 key and the install just sits there with no options but to input the key, which I don't have.
View 4 RepliesI tried upgrading my windows 7, but failed 5 times.
step 1 on copying files are 100%
step 2 installing features n updates are 100%
step 3 FAILED, it stuck on black screen and freeze, nothing i can do besides force restart and its restored to my windows 7 back.
It's always stuck at 75% step 2 and when go to step 3 is freeze ( 5 times in row, I'm thinking give up or buy new laptop with windows 10)... I'm currently downloading ISO file to blank DVD hopefully it's works....
Windows 10 upgraded my computer today. The problem I am having right now that I am stuck on choose keyboard layout auto repair screen. My keyboard works but when light goes out on keyboard and mouse I am not able to actively select any layout.
View 9 RepliesI tried to upgrade my Windows 7 laptop to Windows 10 but after it restarted, it got stuck on the loading screen.
Windows 10 (x86 build 10130)
I tried to upgrade my mom and dads laptop and when it finally began upgrading it got stuck doing the privacy settings on first boot after upgrade. I figured it was stuck for good so i forced it to shutdown. Now when booting it goes back to upgrading at the last og the 3 steps and is just stuck there with 0%.
View 5 RepliesMy installation is stuck in a reset loop. The Win 10 Ready to Install came up, so I clicked Start and it rebooted, back to the login screen, and then Windows Update came up saying it needed to Restart Now. After a couple of minutes the Win 10 Ready screen comes up again. I've rebooted about 20 times and get to the same point every time.
View 2 RepliesInstalling Windows 10 directly on this pc from media creation tool. When it gets to 'searching for updates' it gets stuck a 0%.
View 8 Replies
