Installation :: Is Unformatted Primary Partition Necessary
Feb 3, 2016Noticed this #2 partition, (128MB), on my lappy, is it serving any purpose? Best way to include it in the C: partition
View 9 RepliesNoticed this #2 partition, (128MB), on my lappy, is it serving any purpose? Best way to include it in the C: partition
View 9 RepliesSo I recently formatted my Windows 8.1 system and installed Windows 10. But it seems that the setup decided to set my System parition to a separate HDD (G: ) and put the bootmgr and all the boot files there, instead of using the left-over 350MB System Reserved partition on my primary SSD that Windows 8.1 had used. So of course now if I removed that disk, I wouldn't be able to boot anymore.
So what'll be the best way to move all of the boot files and system partition setting back to my old 350MB System Reserved partition? Will I need to disconnect all the other drives and do a repair install of Windows 10? Or can I manually move the files and partition settings over? The old partition is still marked as Active, so maybe I can just move all the Boot related files from G: to the 350MB partition and it'll just work? Maybe mark G: as INACTIVE too
After I free upgraded from 8.1 to 10 a new partition showed up. I just deleted it and it became unallocated space.
How can I merge this space with my primary partition. Both are on a 256 SSD.
When I right click C: in disk management, the extend volume choice is grayed.
I have four primary partitions (System, C: , D: , E: ) and some free space in my Win10 laptop. Now, I want to make create an extended partition which will hold C, D & E as logical partition. How can I do it without loosing data (i don't have a spare hard disk where I can backup the data).
View 6 RepliesAnyway, a while ago, I was playing with booting installations from a HDD, which worked, but now it seems I'm stuck with the partition I used to store the installation on.
So I have two questions:
1. To delete the H partition, I need to first set the C one to active, correct?
2. Is it even safe to delete the partition since it's a "system" partition?
The H partition is empty as far as general files go, but since it's bootale, it always shows up as a boot option, which is mildly annoying.
Image: [URL] ....
Need to make a ext4 logical partition but it is allowing only primary:
View 9 RepliesI have a new system running under Win 10 on which I want to use an SSD as the boot drive with all my s/w and a WD 6TB Black HDD for my data. However, when I format the 6TB drive it shows up as two unallocated segments, one of 2048.00 GB and the other with 3541.03 GB. The smaller one is available for a simple partition under Win 10 Disk Management, but actions for the larger one are all greyed out. When I make a simple partition in the smaller one the option to extend the partition is greyed out. What is the secret to using the full 6TB under Windows 10?
View 6 RepliesInstalled a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was cloned from the Asus Pc to Samsung SSD. Windows 7 runs great off the SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". I would like to upgrade to Win10 on this pc.
View 9 RepliesI'm getting the Reserved Partition error when I try to install Win 10 on my Wn 7 rig.
My SSD is an EVO 500
partitions are
Data 100MB
C: 419GB
Unallocated 46.58GB - this is my Over Provision Partition.
I guess I need need to increase my Data Partition to about 350MB. I want to use Minni Partition Wizard. Should I Reduce the Front End of my C partition? And use that space to grow the Data Partition?
I did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
View 6 RepliesI have an SSD with WIN7 installed. It has no System Reserved Partition (SRP) and thus no boot files on that nonexistent partition.
I've read here that individuals with a SRP of only 100mb have had issues installing WIN 10 and that those issues were resolved by expanding the SRP from 100mb to 450mb.
Will WIN 10 install if I have no SRP? Will it merely alter the boot files on my C drive?
Because of a problem with 10 a tech told me to revert to 10270. I backed up everything important to my D: drive first. I did a complete formatting of C:. Then upon installing 10270 onto C: I first blew away the partitions on D:, realizing what I had done just after hitting the keys.
I have run Easeus's free Partition Recovery software but it finds absolutely nothing, even in deep scan.
Is there another reliable method with which to attack the problem of restoring the partition tables for D:?
I just upgraded my laptop from windows 8 to win 10. The free upgrade of course did not delete my files from window 8 so I went ahead and installed windows 10 on to my USB and booted from it for a clean install. While installing win 10 however I managed to do it on my C drive. I believe my previous OS was on D drive as when I go into my system properties now, C drive = 373 GB free from 393 GB which has the windows icon over it to show that OS is inside it and the 'D' drive has only 43 GB free from 393 GB capacity.
I would like to free up my D drive and delete all previous files and maybe also remove partition and only have one storage which is C drive. How to do it? Do I just go into my D drive and delete all the files inside it? such program files x86 etc? while running window 8 I managed to get a lot of spyware, adware etc on my system and hence why I preferred a clean install of windows 10.
I upgraded my custom built desktop from Windows 8.1 Pro With Media Center (Originally Windows 7 Pro Retail), and I've noticed I now have an OEM (Reserved) partition on my drive. I'm just about to do a clean install, and would like to know if it's safe to delete or whether I have to leave it there?
View 1 RepliesI upgraded my Windows 7 to Windows 10. Now I would like to have a multi-boot. If I install Windows 7 on my blank 150 GB partition, will Windows 10's boot sequence recognize it so that I have a working multi-boot?
View 1 RepliesWill the free windows 10 update allow me to download windows 10 on another partition?
I have seen the link below and I don't see any sign of windows 10 asking to download on a partition
Recovery Partition...
The thread above reminded me...
My laptop has a partition with Windows 7 on it for recovery purposes. It was a long time ago, but I think I created it from an ISO. I can't even remember how it should be used!
URL....From the registry?
I know that in this case I need also to know what is the primary display or how to get only the primary display value because I want to get the value that set only for the primary display..The key "LogPixels" in HKEY_CURRENT_USERControl PanelDesktop Is no longer relevant for me in Windows 10.
I have a SSD where my operating system is installed.I also have a 3 3TB drives. A 746.52 partition on one of the drives became unallocated after installation of windows 10. I've managed to recover all the data from the unallocated partition. Would now like to fix the partition. I think it may be something to do with MBR/GPT?
View 9 RepliesStupid question probably, however I cannot find an answer online and I'm not the most tech savvy.
I bought a HP laptop around Christmas last year. The laptop came with a recovery partition, which I still to date haven't got around to getting a 32gb drive to back it up to.
I stupidly left W10 installing this morning when my upgrade was offered, but am worried now that the partition with my recovery may be deleted and I may no longer be able to get that onto a drive in case I ever need to re-install the laptop.
Trying a Windows install on a Server box with 4 HDD's installed. This server also allows boot from a Micro SD card. I've got a 64GB micro SD card loaded as well.
Fails when trying to create any partition on any of the HDD's. Works if I temporarily remove one HDD or take out the 64GB internal micro SD card.
I Get a message "Windows cannot create partition on selected Disk" - even when totally empty. It doesn't matter if GPT or MBR disks either.
Seems that if you want to install a non server version of Windows (i.e Windows 10 Pro for example) 4 HDD's is the limit (a micro SD card counts as an HDD).
If I install Esxi on the SD card then no prob creating Windows VM's without removing HDD's.
I think after w10 is installed you can add more HDD's.
The error in the title appears when I try to format my C partition to install windows 10 there. This error does not appear when I install windows 7,I just formatted and installed 7 successfully however it doesn't work for Windows 10. Specs
2.9 GHZ xeon quad core
8 Gb Kingston hyperx
Nvidia GTX 750
I have two hard drives and 5 partitions in total but it just shows one big partition of 297 Gb.
Installed a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was migrated from the Asus Pc to Samsung SSD. Windows 7 boots and runs great off the Samsung SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". A friend used Aomei to create a System Reserved partition but Win10 still gives the same message about the system reserved partition.
View 2 RepliesHow do I create a system reserved partition on my SSD C: drive. I have 3 other drives installed and all have reserved system partitions.
View 5 RepliesEvery time I try to update and install windows 10 I get this error. It seems as if my reserve partition is too small to download windows 10. How would I go about fixing this issue. I have had a dual boot of linux in the past but got rid of it months ago.
View 6 RepliesWondering how Windows 10 deals with putting data on a separate partition or drive. Does it use the same general method as in Windows 7, where it re-maps (for example) "Documents" to a folder on a different letter drive path? So that C:Users{user}Documents becomes G:Users{user}Documents?
I'm hoping that it actually becomes more like *nix, using symbolic links to point to the right place (so C:Users{user}Documents points to the separate partition of drive). Personally, I find the Win7 method to be clunky and problematic in actual use.