Installation :: Lenovo Y50 Laptop Stuck In Endless Fixing Repair Loop
Oct 13, 2015
I ran the window 10 installation last night on my Lenovo Y50 laptop. Today it is stuck in an endless loop of trying to Preparing Automatic Repair, diagnosing PCs and wanting to restart. I can't get past the limited choice of options to actually do anything useful. I just want to get rid of the thing and go back to Window 8. I am to computer stupid to know how do this. I only recently got the laptop. I don't have a recovery disk.
View 3 Replies
Similar Messages:
Oct 20, 2015
i was updating my windows 7 to 10. it was updating smoothly but then my father hard reset the laptop and now my laptop is stuck, it goes to the booting menu. then the "windows error recovery" screen, and when i choose "start windows normally" it shows the logo and says "starting windows" and then it just restarts. how do i solve this? this loop has been going on for the last 2 hours.
View 1 Replies
Apr 13, 2016
OS - Windows 10 (64 Bit)
RAM - 8gb
CPU - Intel Core i5 3.3Ghz
Vid Card - Nvidia GeForce GTX 570
Yesterday I had deleted a Word document by mistake, so I used System Restore to try and get it back. System Restore told me NOT to turn off the PC whilst it was running, and next thing I know after it got halfway through my PC blue screened and I had to restart. Now every time I load up the PC it does the following...
It loads up to the Windows 10 icon > After a few seconds it says 'Your PC ran into a problem and needs to restart' with the error code 0xc000021a > It then restarts itself but THIS time it tries to start Windows Automatic Repair instead > It then says 'Automatic Repair couldn't repair your PC', and gives me the option to click Restart or Advanced Options. This is where I'm having the most trouble, as the mouse and keyboard don't seem to be working at all on this screen so I can't even click any of the options. It's like the screen has frozen/crashed > The only way off this is to then force a restart using the power button on the PC.
The above just keeps carrying on in a loop every time I turn on the PC now. I still have access to the BIOS where my mouse and keyboard DO work.
View 9 Replies
Jan 6, 2016
I was given an error message on reboot and followed a guide to editing the registry to restart the download. The download did not restart however, and my windows 10 is stuck in an endless loop of rebooting. I have downloaded a copy of windows 10 and put it onto a USB, but when I try to boot from USB it takes me back to the BIOS. The BIOS are 'Aptio Setup Utility 2011', and don't seem to allow me to change from UEFI boot to LEGACY boot, although the option is apparently there. Why the USB boot is not working correctly and how to make it do so, I am more than happy to reformat the computer but at this moment in time it's useless. The computer is an Alienware x51 from 2011. As previously mentioned the operating system the PC is trying to boot (or install) is windows 10.
View 4 Replies
Dec 8, 2015
have an Asus Laptop running Win 10, upgraded from win 7. While reading one of the many links from Facebook, using Chrome as a browser, I got a popup that looked like some kind of ransomware . The popup would not close so I turned off the computer.
Now when I turn the computer on it flashes the Asus logo. Then “preparing automatic repair”, “diagnosing your computer” followed by “repairing your computer” appear. It then tells me that the PC did not start correctly and gives me the option to restart or advanced options. Restart brings me back to this point.
Advanced options gives me three options, Turn orr the PC that does that, Exit and continue to Win 10 that gets me back to the previous step or troubleshoot. Trouble shoot gives me the options to reset or more advanced options.
Reset is either a partial or full removal and reinstall or windows. I have some academic software that I do not want to lose if possible and in any case do not have any media to do a Windows reinstall.
The advanced options gives me six choices.
1 System Restore, but there are no restore points found.
2 System image recovery, but I do not have an image disc .
3 Startup repair, starts the process all over and does not find the problem.
4 Command Prompt, appears to open a working command prompt.
5 Startup Settings, Gives me a non clickable list of options but just continues the loop.
6 Go back to previous build. It warns me that I may lose apps and any changes I have made, but not my personal files.
The System is an ASUS laptop, X54C, made in 2012 with Widows 7 Home premium updated to win 10. I have no other access to the computer.
View 6 Replies
Jul 4, 2015
Have just installed 10 on a spare drive and installed that drive into my Sandy Bridge and the machine is now going through an endless loop of start up.
I can hear it make some sort of noise as if something wants to go and I have again tried the machine with the old 7 install drive and the same thing is happening.
The other thing is I am not getting a RAM beep or the BIOS to come up on the Gigabyte board (DEL) have jumpered the reset pins for the BIOS but still no BIOS or for that matter any graphics.
View 1 Replies
Aug 7, 2015
I have upgraded from windows 8.1 to Windows 10 The upgrade went well and i was able to use my computer initially. After i restarted my computer, i am stuck in Automatic repair loop.
I have downloaded a copy of windows 10 iso image and made a windows 10 USB boot drive. I tried repairing the startup issue as suggested in some of the forums but no joy.
Its a new PC setup three months ago. Sad there was no hardware or app compatibility check before upgrading.
Config: Intel I7 with 16GB RAM. dual boot with Ubuntu
View 10 Replies
Sep 8, 2015
I keep getting the "Automatic repair" at boot time and then it diagnoses and later it says it failed.
I've checked several forums now regarding this error, I've tred the following :
1. I tried setting the recoveryenabled to No in using bcdedit. No use.
2. Tried rebulding bcd, No use.
3. Tried resetting by choosing "keep my files" option{Because they are important and I've several programs installed which i don't want to lose).
4. I did chdsk on all drives.
5. Even though I've restore points, it says no restore points found.
View 1 Replies
Aug 4, 2015
Ok so basically, after successfully installing windows 10 from windows 7, I decided to clean my hard drive and reset windows because I deleted my "edge" and thus my apps were not working. The problem then started, the reset went fine until it reached 64% and read "configuring settings" then it just restarted my PC and went in a loop like this;
>startup
>bios screen (Asus/Intel)
>monitor turns off
>monitor turns back on
>blue win10 logo and loading circle
>black screen for 5-10 secs
>install screen displaying 64%
>restarts and loops
View 7 Replies
Mar 27, 2015
During startup automatic repair launches, restart ensues, that's the loop. The error mssg is WDF violation which it seems is related to iTunes. I just can't get out of this loop to do anything about it. I don't have a boot disc. Safe mode is what I would like, but that doesn't work.
View 8 Replies
Aug 24, 2015
I have a Lenovo G500 upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stuck in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files) .
View 1 Replies
Aug 8, 2015
Lenovo ThinkCentre, 32bit was running fine on Windows 7 Home. The upgrade to Win 10 downloaded fine and started installing until the final bit Settings etc when there was a brief error "KMODE EXCEPTION NOT HANDLED" without any further info. No codes, numbers or anything else. Installation continued until 97% and then started rebooting in a loop for several hours already.
I'd prefer to finish the installation properly, but otherwise would like to roll back to Win 7 and have a usable machine with all data and programs intact.
View 2 Replies
Aug 24, 2015
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
View 2 Replies
Aug 2, 2015
I just upgraded to Windows 10 on a brand new Lenovo Z50 laptop. It crashes whenever it is not plugged in with the error message THREAD_STUCK_IN_DEVICE_DRIVER ....
I assume there is some driver that I'm forgetting to download that is related to the battery or something?
View 1 Replies
May 30, 2015
Win 7 user here, wanting to dual boot with Windows 10 preview (on a different partition).
So I made a Win 10 usb boot disc, and it installed it fine. Played around with the new Windows for a few mins, whilst it downloaded an update, and after installing the update, it said it needs to restart, naturally. So I did.
However, since then, the PC keeps restarting, showing a Windows 10 logo, and below that is the text, "preparing automatic repair". Then it just resets, and goes in this endless loop.
Why is this happening, and how do I resolve it?
View 9 Replies
Nov 7, 2015
URL... and now its been stuck on a screen that says "Installing Windows" at the top with a percentage and circle in the middle and a note at the bottom that it's installing features and drivers. However, it has been doing this for two full days now. It comes back up at 64%, goes to 100%, restarts, then goes through the same thing. I have a Dell laptop and no error messages come up at any time.
View 1 Replies
Aug 10, 2015
I had a virus in my laptop so I reset my laptop to find that it's stuck in the INACCESIBLE_BOOT_DEVICE loop. I don't have any Windows disk to put into my laptop. My laptop is an Asus g750jx.
View 1 Replies
Jun 17, 2015
Just downloaded the newest update for Windows 10, I was asked to restart my PC to install it, that was over 30 minutes ago, since then my PC reaches the Microsoft logo and under it, it says Preparing Automatic Repair and then it restarts and does that all over again, what am I suppose to do? I can't even get past it.
View 1 Replies
Dec 12, 2015
I am currently unable to get to my desktop. My system appear to be in an endless loop of rebooting. I have tried a lot and no progress. Here's what I tried: Safe modeSafe mode with network(both safe mode bring me back to the endless loop)System repair(can't repair)Restart my computer(well, do nothing)Changing boot priority(do nothing)Let it run for 30 min(nothing)I reached the 3 first option by shutting down my computer 3times to get Windows to the repair option then to advanced settings. I don't have access to another computer.
Here's what it look like: Open my computerShow Bios pageShow blue window logo with a black backgroundShow 1sec a black screenShow a bigger blue window icon telling me it's gonna restartStep 2 to 4 againShow a bigger blue windows icon.
View 1 Replies
Jul 29, 2015
So I finally made a .iso file for W10 Pro x64 and started installing it. Everything went smoothly my PC restarted 2 times. But when it got to 81% (in total) while "Installing drivers and features" it resterted for the third time and then it started giving me the "Preparing automatic repair" and then "Diagnosing your pc" stuff. I was able to launch the automatic reapair and roll back to W7.
View 2 Replies
Jan 20, 2016
Recently upgraded my Toshiba Satellite NB 10A-laptop from Windows 8.1 to Win 10 and have been logging in via my Hotmail account. Went to settings to set up Local Account, completed the password settings. Then had the choice to Sign Off or Cancel. Chose Sign Off (thinking Cancel would void my new Local Account) and now, for many hours, my laptop is locked into an endless loop of Signing Off.
View 3 Replies
Aug 26, 2015
I recently upgraded my Windows 7 PC to Windows 10 using Windows Update. The whole process was smooth. I never really ran into any problem. Because the PC is so relatively old, I decided to delete all files and reinstall windows 10 using the windows 10 feature 'Reset This PC' to start fresh and theoretically faster. During the reset when Windows is installing my drivers, I noticed that the screen is plain black - no mouse pointer and the amount of reset finished(in percentage) is not also shown. The screen is just plain black. I am pretty sure that both the monitor and CPU is on. I've tried waiting for atleast an hour. I turned my pc's monitor on and off - nothing happened. So I have to resort to hard reset/reboot coz I cannot really see anything on my screen.
When I turned the power of the CPU back, it gave me the error 'The computer restarted unexpectedly or encountered an unexpected error. To install Windows, click ok to restart the computer and restart the installation'. I pressed OK but after restarting, it gave me the same error over and over again. I tried the solution in this website ( during installation of windows | HERESJAKEN), and it got rid of the error. However, I am stuck yet again in a loop that continues to just restart my PC when they reach the screen that tells you how much of the reset is finished, in my case, im stuck at 64% of the reset. That screen is shown for like merely 2 seconds, then the PC will just restart again, then show the "Reset progress screen" again for 2 seconds then PC will just restart again, over and over. I think the only solution is to start the reset of the PC again, but I dont know how.
View 1 Replies
Aug 1, 2015
My installation is stuck in a reset loop. The Win 10 Ready to Install came up, so I clicked Start and it rebooted, back to the login screen, and then Windows Update came up saying it needed to Restart Now. After a couple of minutes the Win 10 Ready screen comes up again. I've rebooted about 20 times and get to the same point every time.
View 2 Replies
Aug 6, 2015
My windows 7 PC was hard to start and restart and I needed to try 10 times or more before it worked (then I didn't restart it for days).
I managed to upgrade it to Windows 10 hoping that it will cure the problem BUT still it is a problem to start.
I checked everything and used every tool possible on windows 7 and windows 10 but nothing worked. (ccleaner and others failed)
So now I have a windows 10 PC that doesn't want to start easily.
After upgrade to windows 10 I GUESS that all driver files have been changed ?what else could it be ?
View 5 Replies
Nov 1, 2015
Earlier this afternoon I decided to reset Windows 10 as I had a problem with BSOD BAD_POOL_CALLING over and over again. I booted in Safe Mode, went to Advanced Options and so on. It wasn't a factory-new reset, just the one that removes all files, app data, etc. I left it for a while and came back to find it hadn't worked; there was an error message that read 'There was a problem whilst restarting your PC'. I tried again and the error message appeared again. Because of this, I decided to exit and continue to Windows 10 and see if it had done anything.
Now, when I try to boot my PC up, the circle that usually rotates on the 'Zoostorm' screen when loading doesn't appear. The PC then reboots and tries again, again and again, but with no success. I have tried turning off and on, and even unplugging everything, however nothing seems to work. My PC is now stuck in a continuous reboot loop and won't load. Unfortunately, I can't press F8 or Shift + F8 when booting to start Safe Mode. I have never made a recovery drive for Windows 10 and I don't think my computer came with a repair disk.
View 9 Replies
Oct 3, 2015
Recently, I purchased a Microsoft Surface 3. From the day I got the tablet, it has been having freezing problems that seem to progressively get worse and worse. Today, I couldn't go two minutes on my Surface without having to restart it.
I would prefer to return the product, but since I can't, I decided to first try to update it. The update kept getting frozen, encountered an error or would just be stuck at 0%.
After exhausting all the other options I knew off, I quickly moved what little files that I had off of my tablet and then performed a factory reset.
The factory reset got stuck at 99%. And I don't mean that it just was there for a few hours--no, the screen literally froze. So I restarted the tablet again, which brought me to a screen that says, "Choose an Operating System" that has two options. Both options are "Windows 10 on volume 3." There seems to be no distinction between them. But the problem is that if I click one, and it doesn't matter which one, or if I just let the tablet automatically run on one of them, it loads for a few seconds with the "Surface" screen, and then immediately loops back to the same "Choose an Operating System."
View 1 Replies
