I just brought a 128GB sandisk ultra usb 3.0 because as a computer tec im tired of fumbling through my tons of usb drivers to do a job. , i want my windows installers & Linux, bookable tools and such all in one usb. so i looked into multibooting usbs and came across many tools, one being SARDU. But i need a hybird UEFI/MBR boot and my laptop doesn't support uefi & legacy simultaneously only one or the other.
So using SARDU i cant see or boot from the usb unless i switch bios to legacy mode, works well because i see and can boot from all of what i have windows installers and linux distros but i have to keep switching back and forth between legacy and uefi. i was wondering if i can make the usb primarily Uefi bootable BUT also bootable for a old MBR if needed.
last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
My laptop has a partition with Windows 7 on it for recovery purposes. It was a long time ago, but I think I created it from an ISO. I can't even remember how it should be used!
Is it advisable to set the UEFI BIOS (Asus ROG Hero Maximus VI motherboard) to a factory default settings before installing Windows 10? Or should I at least set the memory "XMP" profile?
I currently plan on doing a clean install on a new ssd of Windows 10. My current mobo is a ASUS P8z68-V which has UEFI so I plan on doing a UEFI installation of Windows 10. However, I plan on getting a new processor and motherboard sometime in the future, so would I have to do a reinstall of Windows 10 when I get my new motherboard, or could I expect it to boot up normally as would a traditional BIOS system would work?
I'm upgrading my mom's laptop from windows 7 to windows 10. Since my last upgrade I seem to have misplaced my USB Stick that has the UEFI Windows 10 install media on it. I do, however, have a few DVDs lying around that are large enough to make a Installation DVD. If I use the Microsoft Windows 10 Media Creation tool, will it create a UEFI Installation DVD?
i've installed windows 10 on linux before and i've never had any problems booting it (from what i remember, through UEFI boot sources). currently the windows 10 iso seems to be the only one that isn't appearing in UEFI; i installed peppermint from lubuntu using the same image disk writer on the same usb 30 minutes ago.am i supposed to have some specific settings enabled/disabled in my bios to boot the windows install? secure boot is disabled and legacy boot is enabled.
I've rescued an old small server(working with Red Hat enterprise -- but I can't have the OS as it's licensed by the office) from our office --was being chucked out but looks quite good to me.
4 SATA bays populated with 4X 3TB HDD's (the HDD's were mine BTW !!!). I'm thinking of using this as a NAS server - 16 GB RAM and decent Intel CPU (i3 equivalent -- good enough for media server).
The only problem is that it's MBR BIOS and I have two RAID 0 arrays consisting of 2 X 2 3TB HDD's.
Installing Windows though -- No HDD's seen !!! yet there's 12 TB of them in the system.
The RAID is onboard --not a separate RAID controller.
Should I remove the HDD's and send the server on it's original journey to a one way trip to the City's TIP.
(On board VGA good enough also for running a GUI - if I can ever install an OS on it -- preferably W10).
Assume a computer with the UEFI firmware interface.
Assume that during or after a user has upgraded a W8.1 machine to W10 things go horribly wrong - Black screen, Blue screen, No screen. The user now tries to Boot from a USB Emergency Boot Disk that they previously created using the W8.1 utility and then they try to restore W8.1 from a System Image Backup (the one in File History) that they previously created.
Will this be possible and will the Product Key in the UEFI firmware allow a reinstall of W8.1 after a W10 upgrade...?
So, I have Windows 10 already installed on my PC. I upgraded it last Summer from Windows 7 for free.
I've been trying to update it for the past 6 weeks but keep getting the error: "Windows 10 couldn't be installed. Windows can't be installed because this PC has an unsupported desk layout for UEFI firmware."
I have 3 hard drives and Win10 is running on my main SSD, disk 0. I remember having some funky upgrade issues and needed to unplug certain hard-drives due to strange ownership issues. Heres is a look from Disk Management. I've got an MSI m-board plus BIOS, all new.
After resetting UEFI to default values, I can't start WIndows because boot goes to UEFI.
I wanted to make a clean install of W10 and for that I had to make some changes in UEFI because it wouldn't allow me otherwise. But after the installation I see that I have some problems with the sleep and fast boot, not working well. So I went to UEFI and reset it to default, saved and exit. On boot, it goes to UEFI once and again. Windows doesn't load.
So I have to do the same changes that I had to do for installing W10. Disable fast boot, etc. And then yes, I get to Windows, but keep having the same sleep and boot problems. Both work really bad in different ways.
I also did other changes, by the way. I couldn't install W10 because it said that my disk was GPT partition style, so I had to follow some instructions to change that, which wiped my disk and partitions completely and maybe I missed some step...
As the title says how exactly do you achieve this?
I have an ISO Ran RUFUS 2.6 GPT Partition Scheme for UEFI Fat 32 8192 Default X Quick Format X Create a bootable disk using X Create Extended label and Icon Files
so the next part is the Kicker Dell did a number on their Bios and rather than using standard logic as we have done so many years just setting the boot order to "Boot USB" first, you "Only" have the option to create a "Boot Program"!!! so you select your USB Drive then which ever file you want it to boot I'm Assuming? So I tried selecting Setup, bootmgr.efi, and autorun with no results!
I get the secured boot error crap, turn that off and I get Legacy BIOS (that defeats the entire point) What the hell happened to Win95 Boot Discs and FDISK?
I am so frustrated with this garbage, I found out the hard way with Windows 10 and trying to nuke the SSD and put a clean install of 8.1 on it.
How do I set my BIOS to have the DVD boot and install Windows 10 in UEFI mode? I do see a setting on my Asus motherboard UEFI "CSM Compatability" and in there are three options:
UEFI and Legacy OPROM Legacy OPROM only UEFI only
Do I select UEFI only option here?
What is the benefit of installing in UEFI vs Legacy? All I understand is that the system sets up more partitions.
Okay, so the other week i received a new Clevo P650SE laptop. The laptop only had a 500GB 7200RPM HDD with Windows 10 to begin with, so yesterday i added my Samsung 840 EVO SSD. As i wanted this to now be the primary drive, i made another new installation of Windows onto here. After doing this, the system now displayed a boot selection at startup with the choice between the new Windows 10 installation on my SSD or the old one on the HDD.
As i no longer wanted to use the HDD for running Windows, i decided it would be best to delete Windows from this drive. So i booted onto an Ubuntu USB and wiped the entire drive of it's data in GParted, which included three different partitions. This seemed perfectly fine to me at the time, because i had a the new installation from the SSD showing up in the boot manager.
However, when i rebooted the machine and attempted to boot into the new installation on the SSD, it gives me this message:
"The boot configuration data from your PC is missing or contains errors. File: /EFI/Microsoft/Boot/BC Error code: 0xc000000f"
I have tried everything to recover the system but nothing has worked. Startup repair from my Windows USB doesn't do anything, the system reset wouldn't operate because it stated that the partition was locked.
Nothing with the Command Prompt is working, I have done 'bootrec /fixmbr', 'bootrec /fixboot' and 'bootrec /rebuildbcd', but the last command returns the following error:
"The requested system drive cannot be found."
I also did 'bcdboot C:/Windows' but that also refused to work. I assumed the reason for this might be because the drive didn't have a letter, but when i attempted to add a letter is says:
"The specified drive letter is not free to be assigned."
Both drives in my laptop have now been completely wiped and converted to MBR, but even with the two drives empty the original message still appears when booting my Windows USB in UEFI.
I have only had this laptop a couple of weeks and it's already completely messed up. I can boot the Windows USB in Legacy and install Windows as normal, but of course i'm looking to have it back on UEFI as it was before.
If I create a DVD with Windows 10 Home and try to perform a clean install on a computer that came with Windows 8/8.1 Home pre-installed. Will Windows 10 Home recognize and accept my genuine Windows 8/ 8.1 Home Key stored in UEFI or firmware etc?
By Clean install I mean not updating but directly trying to install on a computer, on which Windows 10 have never been installed before.
Am I right in thinking that after upgrading from Windows 8.1 to Windows 10, I should be able to make a bootable USB including a system image without having to copy install.wim from the downloaded media, placing it on the C: partition and setting the appropriate entry in ReagentC?
As I can only make such a bootable USB after performing the above steps, does this mean that if I subsequently delete the install.wim and ReagentC entry, I will not be able to effect a recovery from the hard drive alone?
Recovery media seems to be fussy about the type of flash drive I use. I can make the full recovery drive including the system image on a Sandisk Cruzer Blade, but if instead I try using a Sandisk Cruzer Edge of the same size, I can only make a boot USB without the image. Otherwise I get the message 'We can't create the recovery drive. A problem occurred while creating the recovery drive'. Why is this?
I've searched on Google how to make a USB bootable to install windows files. I'm planning to buy Win10 CD, but my PC DVD drive is dead (making an annoying noise during startup). so is there anyway to make USB bootable to install windows files?
Just built a X99 system, now I need to install Windows 10 and I don't have a optical drive but the copy of Windows 10 I bought is on a disc, so I need making a bootable Windows 10 USB. The USB is empty and formatted as a NTFS.
I'm trying to just run my laptop as a desktop, as the screen hinges are faulty. Its a Lenovo Y410P. I know how to switch the display to the external monitor in the control panel settings. But I want to make it so that I can put the laptop to sleep or restart the laptop, and upon boot up have the login be displayed on the second monitor exclusively.
Currently, when the laptop is started from sleep or restarts, it will display everything only on the laptop screen. Then I have to open up the laptop, switch settings and send it to the external monitor.
Monitor is a ViewSonic VA2265smh. I'm running this via HDMI cable.
I want to save this Old windows XP file. It has been updated / untouched and want to keep it. Its around 10 GB big how do I make it to a bootable dvd is this even possible?
