It gets thru part of the set up and I'm getting an error box that says Modern Setup Host has stopped working. I give up. I was hoping a repair would keep my app and docs, but I guess that option is not working. At some point I will do a clean install, if I can, I just don't have the patience to reinstall all my apps and stuff.
View 2 RepliesI've never seen this problem with the previous O.S., Windows 7, but Windows 10 is throwing me this error message approximately 70% of the time when I run the network troubleshooter...either from the Control Panel, or by right clicking on the task bar's connection icon.
Though Win10 is the first O.S. to give me this error, the Microsoft support forums indicate that it's been fairly annoying to Windows 7 users back to 2010. Also, Microsoft support employees just give vague general tips for trying to nail down the cause.
I'm only experiencing this in EDGE. Edge sometimes freezes on a webpage when I'm attempting to post a message to a forum, similar to what I'm doing now. I run the Network Troubleshooter and get the "Native Host Has Stopped..." error. I open a new Edge tab, come to this forum and try to do a search for the answer, but this forum's search function ignores my input. So, I opened IE-11, navigate to Win10 forum, and all works well.
Experienced the "Scripted Diagnostic Native Host has Stopped Working" error when running the network troubleshooter?
After installing windows 10 on my HP laptop PC, some keyboard keys have stopped working. The keys that don't work are: { 'escape' 'g' 'h' 'backspace' }. I am sure it is not a hardware problem because on occasion, all the keys that previously did not work, start working again. In fact, as I am typing this thread, my keys are working correctly. When they stop working, I try to uninstall or update the driver in device manager but that does not work. Keep in mind this started happening after installing Windows 10. I have not had this problem in Windows 8.1.
View 9 RepliesMy windows 2003 server stopped working in normal mode, but working in "safe mode with networking" and giving reply from all peers, and reaching all remote locations. in Normal mode not even ping to peer and giving error "destination host unreachable". tried with new NIC. IP conflict coming when assigning used IP address, if giving a new IP address not even request going to peer showing the same error as "destination host un reachble".
View 1 RepliesWindows 10 worked well for 2 days but suddenly my dell laptop screen stuttered. I restarted and found that start menu is unresponsive. All the modern apps are not working. Only desktop apps are working.
View 13 RepliesI install Windows to vhdx in hyper-v. I make two users, make some updates and install some apps. I make sysprep and copy vhdx to another PC and boot from this.
After this, start menu does not work. i can not tun no modern apps, and Notifications panel does not works too. When I make new user, all works fine. I need to make this work for the already created User.
I installed windows 7 as a dual boot with windows 10 (as I was having some compatibility problems with some programs) but now the boot UI has gone back to the old black text based UI.
I was just wondering is there a way to get the modern blue boot UI back?
have a problem with usb drivers according to my control panel which says it is fixing the issue and then tells me to reboot but it is not fixed. Keyboard lights up on start but when the first blue window appears it goes off. I can get into the bios ok and the keyboard works there. only one port is working (USB3). as my mouse and keyboard are usb and there is no PS2 port i am kinda cactus at the moment. Been searching for usb drivers for win 10 but not having any luck. Everything was working fine since November until yesterday.
View 2 RepliesWindows 10 just came out today and I have been attempting to install it on my Windows 8.1 Pro desktop. I was able to get it to work on a Windows 7 Pro with no problems. I have been using the Media Creation Tool that I downloaded straight for Microsoft. Every time I have run it on my Win 8.1 Pro, after downloading it, it comes up with an error message saying: "Something Happened: setup has failed to initialize the working directory".
I also tried to create a Win10 bootable USB but when I booted to it said my key wouldn't work. I looked over several times and it wasn't wrong. I got this copy of Windows 8.1 Pro from Dreamspark but it is a legitimate version of Windows.
I have also tried updating my Win 8.1, using the Windows Update Diagnostics Tool, and using the "wuauclt.exe /updatenow" thingy.
I also tried deleting the $Windows. ~WS and $Windows. ~BT folders and re-downloading Windows 10 but no avail.
Having some trouble installing on this tablet. It worked fine on my other computers. I tried installing from a USB drive and got " setup failed to initialize the working directory". Then tried upgrading directly from the media creation tool site and got "something happened" error sometime aftr it completed downloading.
View 2 RepliesMic stopped working after windows 10 update. I can't raise the db levels and it does not record any sounds. Its like its muted all the time, but i cant unmute it. Its an HyperX Cloud II if that matters.
[URL]....
Sorted my Matshita dvd-ram and also a Lite On portable drive for me.
Right-click the Start button > Command Prompt (Admin) and type
reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
Win 10 was working well on my Toshiba Satellite.(i7 4 gig ram).Then I lost the ability to download with Cannon Camera software. This program stopped working. ( got off pictures by removing SD card and putting it direct in laptop.)Next computer slows down and run st 55 to 60 Deg C. (air temp about 23 deg and desktop computer running at 35 deg.)
Then Blue screen telling me Video_Krnl............ failed/error.Ran restore point and system worked again for a while(2 days).Now I can only get 3 to 4 minutes before blue screening and failing. Have blown out cooling fins but little to no dust as computer is only just one year old. Regularly run AVG and Wise 365 cleaner over it.
This morning when i turned on my computer the sound was not working.I reinstall all my sound drivers, i reboot my computer a lots of time, i cheked if everythings was pluged correctly and everythings was supposed to be fine but the sound don't work !
View 1 RepliesRecently i have upgraded to Windows 10 from Windows 7. Everything was fine the first hour, then all of the sudden the mouse stopped working and it was no where to be seen. The mouse that I use is an old Logitech mouse that has a ball to control the mouse. So, I plugged in another mouse and it was working, but the clicks were backwards.
View 1 RepliesRecently discovered Windows Explorer stop working. Ran SFC /ScanNow result were some flies were repaired, which directed me to C:WindowLogCBSCBS.log, nothing found there. What to do, it was only by accident I discovered it was not working, no error messages or any signs.
View 2 RepliesThe start button on windows 10 has stopped working for me. It came right after I installed a new graphics card though in the days before I had noticed strange stuff like when I searched for an app and clicked on its icon within the start menu nothing would happen. File explorer, settings etc stills works but are very slow.
View 2 RepliesI checked on the stability report last night, and I found out that the "Get Office" app has been having issues every single day.
The computer does not crash, and there was no error message. Without examining the stability report, one would never know there's anything wrong.
I uninstalled the app, and everything seems to be fine now. I sign onto Windows locally, without using my Outlook account.
I Tried to connect to my 2 other PCs this morning. I just get a screen where it says it's 'Initialising Display parameters' but will not get past this screen.
Was working perfectly yesterday! I can take control of these same computers if I try it from my Linux Ubunto PC. So that rules out the network and all of the other PCs which are still on win7
After upgrading my Dell Inspiron 15 3521 to windows 10, my number keys stopped working.
I have updated the touchpad and keyboard drivers but they are still not working.
I tried the other day to search for a program on the start menu and it worked fine. I then set up Cortana for speech mode and all I get now when typing in the box are four blue dots scrolling at the top of the search box.
View 2 RepliesMy start menu stopped working several weeks ago and I have been trying all the suggestions found of the various forums with the exception of reloading Windows 10. It looks like Microsoft should be responsible for publishing a solution to this problem realizing how many people are having the same trouble.
View 5 RepliesI have a Logitech wireless keyboard that uses a USB device. After a update on the 10 of March my keyboard stopped working. I have tried another wireless USB keyboard Mircosoft and a a wired Microsoft keyboard without success.
I have followed a few of the suggested fixes after doing a search without success.
On October 29 the start button and the Windows 10 taskbar stopped working. I have called Microsoft tech support and chatted online five times but they have not been able to resolve the problem. Windows 10 worked alright for over a month, but then this problem occurred. I believe there was a Windows 10 update around that time.
View 9 Repliesmy most used App the Windows Weather app has stopped working, I click on it to open and it open and then closes again right away. Is there anyway I can fix this? Is it a common Win 10 app system fault with the app or is my PC specific that has the problem?
View 7 RepliesAfter upgrading to Windows 10 on my sony laptop my mouse will not come back on the screen after I close my laptop and the computer goes to sleep. I have to restart my laptop after every time my computer goes to sleep to get my mouse back on the screen. Just checked DM and the touchpad drivers are current.
View 4 Replies