I installed windows on my new hdd (because current is starting to fail). But when i have only that drive connected it just skips it and starts PXE over ipv4. Is there anything i need to do to make it bootable? PS. I had to install it on legacy support
View 9 RepliesI have the ESD for Windows 10 built 10240 . I need to clean install it on a different drive and dual boot it with Windows 8.1. Can I simply boot with the 10 ISO (in UEFI boot) and clean install it on a different drive?
Would I then be able to dual boot it with my activated 8.1 copy?
How do I set my BIOS to have the DVD boot and install Windows 10 in UEFI mode? I do see a setting on my Asus motherboard UEFI "CSM Compatability" and in there are three options:
UEFI and Legacy OPROM
Legacy OPROM only
UEFI only
Do I select UEFI only option here?
What is the benefit of installing in UEFI vs Legacy? All I understand is that the system sets up more partitions.
So I've recently bought an SSD Drive soley for the purpose of running Windows. The original Hard Drive was a 2TB Samsung drive that I have since formatted and using for Storage only. Installed Windows 10 on the SSD and the machine is working great, boots up in aound 10 seconds from turning the machine on.
Now heres my issue. For some reason if i turn my PC on and do nothing it will show the message no operating system found press ctrl, alt + del to restart. This is because its still looking to my original 2TB Drive to boot up. So basically I have to tap F something everytime i turn my machine on and select the SSD from the list.
Here is where things get weird. I have gone into the bios and have the choice of what the machine boots up with, so again i can select my SSD. The problem is the section where I can set the boot order default is only showing my 2TB Hard drive and the Blu-Ray drive, the SSD doesnt appear in that list. So it appears in one time boot options but not in the boot priority list so I cant set it as the default Drive.
So we're trying to get our first Win10 VM up and running. I downloaded the latest ISo from the Volume License site and installed it on a VM just fine. I ran all Windows Updates as well.
After that I ran Sysprep and choose OOBE, Generalize, and Shutdown. I then copied the VHDX file to a new location for a new VM as we normally do.
That all seemed to work fine until I then attached that hard drive file to a new VM and fired it up. After clicking the through the timezone page I get an error stating:
Windows could not complete the installation. To install Windows on this computer, restart the installation.
I found some info online about changing the minimum password setting to 0 but that did not work. I then fired up my Template machine to see if that would setup fine and that now gets the same error so I'm kind of stuck.
I don't want to have to do manual steps on every VM we create
I got a HP Notebook yesterday that had Windows 8.1 on it. Today I decided I wanted to reinstall Windows 10 (not upgrade, but clean install) on it and I do have experience in reinstalling operating systems. I reinstalled Windows 10 from a USB stick and when the computer restarted after the installation was done, it would keep booting from the USB stick. I exited the installation screen and then went to the BIOS to change boot priority to "OS Manager", but all I got was an error which I don't remember what it said, and then it just restarted again.
So my question is, how can I get Windows 10 to boot after is has installed and restarted?This is my laptop: HP 15.6 Laptop - Black (Intel Celeron N3050 / 500GB HDD / 4GB RAM / Windows 8.1) : Laptops - Best Buy Canada
I've just built my desktop and I'm trying to dual boot Windows 10 and Ubuntu 15.04.
I've already partitioned my hard drive, and installed Windows 10 and Ubuntu 15.04, but I'm trying to get to a place where I can choose what OS to start whenever I turn on my computer.
At the moment, I can run both Windows 10 and Ubuntu 15.04 if I go into the BIOS and rearrange my boot priorities, but that's just a huge hassle. Is there a convenient way to choose at startup, similar to how Windows 8 had this?
I'm still running Vista. I recently purchased a thumb drive with Windows 10 from Microsoft (only because they don't sell them on disc anymore, which is easy and I've done a clean install of Vista half a dozen times from CD-Rom).
Anyway, I plug in the thumb drive, I reboot, go to BIOS, set to boot from USB-HDD. Exit that, and a screen comes up with the device (my USB with Windows 10) at the top and Verifying DMI Pool way down at the bottom. But then nothing. It just hangs there. As far as I can tell, it will hang there forever (but at the very least an hour).
I have Windows 10 installed on HD1 (Samsung) and working will. I had a second HD2 (WD) with Win7 installed for a dual boot operation. For some reason, I could never successfully boot into Win7. Out of frustration I decided to format the Win7 drive and start over.
The problem now is I cannot install Win7 on the HD2 drive. When I choose F12 on boot up and select the WD disk, a screen appears saying "Windows Boot Manager" It instructs me to insert my Win7 install disk an reboot.
Next steps:
I insert the Win7 install disk and reboot using F12 to select the WD disk. The "Windows Boot Manager" screen appears again with the same instructions as above! If I reboot again and do nothing, the system will boot to Windows 10.
My question, how to install Win7 on the WD disk and then setup a dual boot operation?
Today I used a registry cleaner to fix my slow system, but instead of repairing it it made my PC stuck in user login bootloop, but they backed up the registry and I have it. So the question is, how can I import the registry in this non-booting PC?
I tried running RegEdit from CMD from Repair DVD, but "load hives" is greyed out!
So I found this issue in my second laptop that running W10TP. I have HP as my first, and ASUS as the second one.
In my ASUS (2nd) I can't booting the laptop without force shut down through hold the power button, because it always stuck at Windows logo. After shutdown and boot again, I succeeded into the lock screen. But it taking too long in the blank screen for almost one minute.
This issue never happened in my HP laptop.
I've tried many methods to find this issue, system scan, virus scan, update installed drivers, driver scan (it failed). And for a couple days it work so well and I'm happy for that, no more stuck at booting.
But the issue come again after many security update for build 10240. The booting is stuck again and BSOD with pfn_list_ corrupted. After restart the laptop I've tried again all the methods that I've did. And then I found so many viruses and malwares from Windows Defender. It's odd for me because it is never happened before, and suddenly of course.
After the viruses were cleaned, the issue is still persist. I want to reset my laptop from settings/update& security/recovery/reset. Is this necessary to do considering W10 will come in 3 days left?
I've had issues with my CPU and mobo, so I got new ones from a friend, but there were vital pieces missing. I rebuilt my PC with all of its original parts as best as I could, and now Windows 10 is stuck at the logo with no circle. I followed my motherboard's manual for all the plug ins and whatnot, and everything seems to be in order, however the actions of my PC don't seem to demonstrate that.
View 6 RepliesI have dual booting setup on my pc my main system and my development system but to get the development system my computer first boots the main one then asks me which os i would if the main one it goes right to as it already loaded but if it is the development system it will restart and load that, so my pc has to boot twice. Is there a way from the main system some how i can restart straight to the other one. Both os are windows.
View 1 RepliesJust getting to grips with W10 and noticed that dual booting can be set up in System Configuration-boot. This was the case in XP, I think or was a previous version. Bit late now as I have easybcd on W7 drive. Before you ask I have never had a successful install where W10 finds W7 and displays that fancy box on start up.
View 8 RepliesI've decided that I would like to dual boot Windows 10 TP (I know im late to the game)
Now ive done dual booting before, but I was wondering if its any different, as my system has change to include a SSD which just has windows 7 and a HDD with my files.
If I just partition my HDD to a smaller size and install windows 10 on the other half of that partition will that work and not affect windows 7
My nice new SDD arrived, I installed it into the PC and disconnected the other SATA drives bar the DVD, spun up my W10 DVD and fairly quickly had a new activated install of W10.
So I plugged in the old SDD (it has the old C: on it) and the HDDs and it booted off the old SDD.
Unplugged the old SDD, plugged in the new one plus the HDDs, it wouldn't boot.
Went back to just the new SDD installed, boots fine, hot-plugged the HDDs and it wouldn't see them.
So right now I'm back where I was with the old SDD and the two HDDs which are mirrored.
I recently upgraded to Version 1511 of Windows 10 Home. I have been using it for almost a week without problems, but all of a sudden this morning it is booting to a picture screen showing the date and time.
When I click on the screen it changes to a password page. The thing is I have never had a password. I have tried leaving it blank and clicking OK, but it will not accept this. So I am in effect being shut out of Windows. How can I get back to Windows?
Just upgraded a Samsung Notebook from Windows 7 to Windows 10, keep getting "This application does not support this version of Windows" message regarding Fast Booting, tried compatibility fixes and turning the application off but the messgae still keeps popping up?
View 3 RepliesI want to dual boot windows 7 and windows 10 on 2 separate hard drives.
View 9 RepliesMy wife purchased a Dell 8700 XPS with i7 4790 processor,16GB ram. and Nvidia GeForce GTX 745 4GB and a 2 terabyte hard drive. She also purchased a Kingston HyperX 120 GB SSD. I used a popular software to migrated Windows 8.1 Home to the SSD from the HDD. This seemed to work well but on booting up the system the HDD boots unless I go into the bios and select the SSD in SATA 2 under the DVD reader/burner and select a {boot manager on Disk 1{ which was installed by migration software. I had hoped to format the HDD and use as data disk afterwards.
I noted that some threads mention I should have disconnected HDD when booting from SSD first time which I did not do.It also appears that the OEM partition is still on the HDD. I believe a clean install is required. Will this also remove the > boot manager on disk 1> line in the bios.
I have 2 Windows 10 (7 Upgrades) Installed,
...I would like to set them up, so I can Dual Boot them, without re-installing them.
What does it mean when you see a black screen that has a grey flashing dash located at the top left-hand corner of the screen? It moves down a bit before finally moving onto the Windows 10 logo, where it sometimes gets stuck and reboots (and the grey dash screen appears again before moving on).
I noticed this issue both during upgrade (when it failed and tried to recover the installation) and after installation. This issue occurred on an Acer Aspire Z5801. It does not occur on Windows 7.
So, this is a really weird problem I've only JUST started to encounter. I went to go overclock my CPU, as I've been playing FF14 a lot these past few months and figured an overclock would work out with the events taking massive chunks out of my framerate whenever I go near a populated area.
So, the Overclock failed, and I had to restart my computer and go back into the BIOS to reset everything to factory. This is where it gets weird. Now, whenever I boot up my PC it'll go into Windows but give me a 0xc0000225 Error. But, when I go into BIOS and go into the boot menu and boot my SSD from there, it works flawlessly. It's not a /massive' inconvenience I suppose, but it's still baffling.
I've got an Asus Z97-A Motherboard.
I have attempted to download windows 10 around 4/5 times, the download completes and states that my computer needs to restart upon which it claims it is configuring the windows 10 upgrade. I would assume from this point it would restart into the windows 10 configuration however each time I have tried it it restarts back into windows 8 as if nothing had happened.
My laptop then opens up windows update and says I am able to download windows 10. This is really frustrating as I can't even seem to get into the windows 10 setup.
As you can see I am attempting to download again but there is no trace at all of it attempting to install windows other than this failed update that you can see here.
I am using an HP Pavillion 15-n268a laptop.
Before installing Windows 10 I clean reinstalled my Windows 7 onto a new SSD but inadvertently left my BIOS boot drive as my old HDD. Now I find that I have my windows 10 boot files in the HDD and the rest of the OS on the SSD, so I am still dependant on that old HDD. It's quite old, and I tried to swap it out to a new HDD but found this issue.
I've tried BootRec /RebuildBcd, BootRec /FixMbr and BootRec /FixBoot, rebooting the PC between each, but without success. I want to make the SSD bootable, what have I missed?
I had never had my computer set to boot from USB but I created a bootable flash drive with Win 10 on it and wanted to try it. I set the BIOS boot options to try the CD drive first, then USB, and then the Hard drive. It booted fine but I have a question now.
If I have a non-bootable USB storage device plugged in and either start up or restart my computer, after the BIOS post I get the message, "Missing Operating System" and the whole boot process stops and will not proceed to the Hard Drive. I had assumed it would work the same as the CD-ROM boot where if the media is not bootable, it just skips it and goes to the next option in the list. Now I have found that the same thing happens on my Win 7 machine. Is this normal? If it is, I will turn off USB boot again and just go back to burning disks.