Installation :: OS Does Not Reboot After Installed On New Samsung SSD
Oct 17, 2015
I've just bought a new SSD (Samsung EVO 850 250GB) for my Dell XPS 15 (L521x). After I inserted it into my laptop i intalled Windows 10 Home Pro. The installation process happened without any error, the laptop restarted several times (which is normal during the installation) and then booted to the desktop. again, no error whatsover. now, when i try to turn off or reboot my laptop, it is not able to power off automatically (i've waited for over an hour). so i have to power it off forcefully by pressing the power button for several seconds). if i want to reboot the laptop, it gets stuck at the dell logo, the little circle is spinning but nothing else is happening. i have updated all drivers, tried to boot into safe-mode, nothing worked
The current bios version is up to date (A16), SATA operation mode is AHCI, according to Samsung Magician (which i was able to install) everything is configured correctly.
View 1 Replies
Similar Messages:
Aug 8, 2015
Just upgraded a Samsung Notebook from Windows 7 to Windows 10, keep getting "This application does not support this version of Windows" message regarding Fast Booting, tried compatibility fixes and turning the application off but the messgae still keeps popping up?
View 3 Replies
Oct 12, 2015
I have just learned that Samsung have installed a program that blocks Windows Updates. I am trying to get the Windows 10 upgrade notification and came across an article about this. How I can unblock this Samsung install so that I am able to upgrade to Windows 10?
View 7 Replies
Aug 4, 2015
Samsung RC510 - Got stuck at windows 10 logo when trying to boot into USB.
BIOS Type:PhoenixBIOS Date:January 19th, 2011BIOS ID:03HU.M008.20110119.KSYBIOS OEM:03HU.M008.20110119.KSYChipset:Intel 044 rev 2SuperIO:UnknownManufacturer:SAMSUNG ELECTRONICS CO., LTD.Motherboard:RC410/RC510/RC710
View 9 Replies
Sep 16, 2015
Windows 10 downloaded to my laptop, and stated that it's ready for installation, etc. As I reboot my laptop, it just goes back into Windows 7. I can't seem to figure out why either. I also tried downloading the stand alone installer with no success either. It will just say installation failed.
View 4 Replies
Sep 12, 2015
Upgrading from windows 7 to 10, started install at around 10:30am and left it....around 2:30pm it started the large circle with the % in the centre, and again left it for another hour or so and came back to a black screen, no cursor or anything.
I waited until about 7:30 and still nothing and did a reboot by holding the power button down. On restarting, I get the windows 10 logo with the spinning dots, and then it cuts to black with no cursor. The CPU light does what it would usually do on startup, and when it first cuts to black but then the screen seems to change to a different black (if that makes sense?!) and the light only blips extremely quickly with a long period before it blips again
i know this is another update gone wrong post but I can't seem to find any with the same problem, just similar ones. I've read it can take a long time, but it's been nearly 11 hours and is very frustrating!
i'm not mega pc savvy, I get 2 options when I boot, and I've looked and there's no option for me to do a safe boot, or to revert back go windows 7. If I leave it on black screen for too long it automatically goes into sleep mode.
View 4 Replies
Feb 10, 2016
I have been trying for hours to install windows 10 home on my newly built PC but i can't because there is a problem. I bought the usb version since i don't have an optical drive bay.
The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.
I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!
I have made a video showing what happens (win 10): OS installation problem - YouTube
I also made a video that shows my BIOS: Gigabyte GA-Z170X-Gaming 3 BIOS - YouTube
View 1 Replies
Dec 3, 2015
is it possible to uninstall the first installed OS (Windows 8.1) in the SSD that has also win 10 installed into the second partition without losing data in win 10? If not from windows tools maybe using some software? Currently this is how my SSD is:
Disk0: [System Reserved:350Mt][D:233Gt][C:231Gt][Recovery:450Mt] D being windows 8.1
View 6 Replies
Aug 26, 2015
Since upgrading to Win 10 anytime that I reboot my machine I get a screen where I have so many seconds to accept either Windows 7 or Windows 7 recovered. I let the timer run down or I hit enter which would load the Windows 7 OS. However Windows ten loads.
View 4 Replies
Sep 5, 2015
I have recently been trying to upgrade to windows 10 on a used alienware aurora r3 pc. I got my reservation, checked the windows 10 app every day, and finally, I was ready to get the upgrade, but I'm having issues installing it. After windows update downloads everything and I get to the installation proper, it takes like 4 hours for it to get to about 30% and then finally reboots. I'm taken to a windows ten loading screen, but each time I get to this point, the loading circle freezes. If I turn the pc off at this point and back on again, it reinstalls my normal windows 7 and I'm able to get back to my files and everything, but I still really want to get 10. Solved Build 10041: Freeze on Restart - Windows 10 Forums My issues seem to be similar to what is described in this article, and it may have something to do with it setting "fast reboot" on by default. What do I need to do to resolve these issues?
View 9 Replies
Dec 29, 2015
Bought new motherboard, a new PSU tried loading win10 umpteen times from ISO ( same with win 8 + gen key ) I get this far all the time every time. Just won't go into Windows proper. All the fixes like restore/reset don't work.
I can get the command prompt > but don't have the expertise to know what I could type to understand why I can't progress into any windows OS
tried partition magic + hirens boots to completely wipe the drive then clean install windows have run memtest86, HDD tools, no bad sectors, oh mouse/keyboard are new too . Its only the CPU I haven't changed and that is nicely set at low temp, as in BIOS I've upped the fan to keep it cool.
View 5 Replies
Nov 12, 2015
I just installed a new SSD (disk 1) on my laptop and used Samsung's tool to clone my OS drive (C: on disk 2) onto it. This was done with no error, however I cannot boot from the new SSD in bios, as this hangs up the computer.
I assume this has to do with C: still being the boot and active partition, and the system partition (also active) being on Disk 0 (HDD).
I attached my disk management screenshot for reference.
How to make my new SSD (disk 1) the boot drive? For info, I do not have a windows OS CD but already created a windows 10 repair disk.
View 9 Replies
Aug 16, 2015
I have this problem when i want to install win10 from by bootable usb It says Select the driver to be installed.
how to fix?
View 9 Replies
Sep 19, 2015
Got a perfect upgrade from Win7 Pro to Win10 Pro for any programs that were on the boot disk. However any programs that were loaded on a second (non-bootable) disk were not recognized at all. Is there any way, other than reloading all those programs, to get Win10 Pro to know they are there? I thought this would be caught when the system upgraded but this did not happen. I was trying to keep my boot drive lean and mean.
View 5 Replies
Aug 5, 2015
I have a Acer Aspire XC-603G desktop upgraded to Windows 10 64bit Home (no Hyper-V). I want to run 16 bit software that is incompatible. I would like to dual boot with Vista x86 (gave away my XP). From what I understand, you must load the older version first due to Windows 10's MBR. Can I backup/clone Windows 10 partition, reformat and repartition the HDD, install Vista in first partition, then restore Windows 10 to the second partition? I'm thinking I'll need a fresh Windows 10 install. Or is there a simpler way? The only other way I see is to buy the Pro upgrade to get Hyper-V. And if I did the latter would it really be compatible with my Windows 95 16bit ImageReader Scanner software?
View 2 Replies
Jul 30, 2015
When upgrading to Windows 10, I clicked to download the 64-bit version however when I finished installing it was a 32-bit version.
View 2 Replies
Jun 6, 2015
Trying to dual boot build 10130 iso on a fresh install of 8.1. Received a message:"Windows cannot be installed to this disk. The selected disk is not of the GPT partition style"
Laptop is an Asus x550c.
System recovery to Asus factory default.
Asus has a default 4 Partition setup. I added a 5th, Partition 6, by shrinking Partition 4
Looks something like this:
Drive 0 Partition 3 128MB MSR (Reserved)
Drive 0 Partition 4 OS 395GB Primary
Drive 0 Partition 5 451MB Recovery
Drive 0 Partition 6 New Volume 48GB Primary
Drive 0 Partition 7 Restore 20GB Recovery
I'm using the new Build 10130 iso which just came out.I don't want to use a VM like I have on a Desktop.
View 9 Replies
Aug 3, 2015
i have a toshiba satellite laptop with a windows 7 operating system. i began to install the windows 10 upgrade but at 75% the computer went into a reboot cycle. i tried some settings in the BIOS and the computer continues to restart.
View 2 Replies
Aug 30, 2015
I've been trying to update my windows 8.1 to Windows 10 for at least 10 times now and it always stuck at around 60% It reboots itself a few times and it always comes back to the circle screen with the % progress but getting around 60% it reboots and it gets stuck there... black screen, no cursor, no sound.
I've tried to plug it into a secondary screen thru hdmi but nothings happens; also I've uninstalled my antivirus since I've read it might be the problem but it didn't work..
I've got a Dell Inspiron 7537 Windows 8.1 x64 Intel Core i7, 8gb ram, Intel HD Graphics 2gb + Nvidia Geforce
View 1 Replies
Feb 6, 2016
I have been trying for hours to install windows 10 home on my newly built PC but i can't because there is a problem. I bought the usb version since i don't have an optical drive bay.
The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.
I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!
I have made a video showing what happens (win 10): [URL] ....
I also made a video that shows my BIOS: [URL] ....
Everything looks fine... but it doesn't work!!
View 3 Replies
Oct 22, 2014
We've written before about Windows 10's new updating policy, and today we're seeing the real-world result for the first time. The Windows 10 Technical Preview, build 9849, is being updated to build 9860. That update will roll out automatically to members of the Windows Insider program, and it will be delivered through Windows Update.The operating system upgrade is a little more heavyweight than a regular hotfix; systems will need to reboot to finish installation, and Microsoft says that the reboot will take longer than normal.
The major feature of the new build is that it contains the first iteration of Windows 10's notification center. At the moment, it's a simple collection of historic notifications. Microsoft says that future builds will add more capabilities to the notification center, such as the ability to take actions in response to notifications.First major update to Windows 10 Preview, delivered through Windows Update
Before talking about the new things, I will remind you that you are using a work in progress. As Joe said in his last post, we’re sharing things with you even though there are rough edges. This is the part of building Windows that you usually don’t get to see, since we work hard to smooth these out before it typically gets to you. There are likely many small bugs that you’ll encounter, but these are a few of the big ones that we think you should be aware of right away:
In some places the UI design has gone “backwards” temporarily while we’re working on the final experiences. For example in this build we know that it’s harder to join a Wi-Fi network. We’ll make changes to fix that later.Another example of some UI “roughness” is sometimes Internet Explorer glyphs look garbled and items on the Start menu might disappear. Not everyone will see this, it depends on your display driver. We have a fix for this one coming soon.Some machines may wake up and not go back to sleep properly.Microsoft Solitaire and Mahjong games are broken in some cases and won’t launch.When using 2 external monitors over Display Link, you may get a blue screen when you undock. This does not appear to be an issue when using just 1 external monitor. URL...The download will range between 2GB and 2.74GB depending on CPU architecture and language.Wow, that's like 2 or 3 complete Linux ISO's.
View 11 Replies
Aug 9, 2015
Will it remove all of my games i installed on the other drive such as D: if i upgrade from 8.1 to 10 ?
View 2 Replies
Oct 11, 2015
I keep getting an error when I install Windows 7. I want to install Windows 7 alongside Windows 10. windows cannot be installed to this disk the selected disk is of the gpt partition style
I read solutions to this and most of them write I must format my entire hard drive, but I can't do that because that would mean losing all my data.
View 1 Replies
Oct 15, 2015
I have Windows 7 Pro 64bit on a desktop and I have never requested the W10 upgrade. Two days ago when I went to Windows update I got a surprise. The screen below showed up!
My update options was changed to automatic from notify me and I can't install some real W7 updates waiting in the wings.
I worked with Microsoft Support for 2 hours yesterday evening and nothing has really changed. The Get Windows 10 app KB3035583 was uninstalled and so was KB2952664. How to get the Windows Update screen back to allowing other updates. I'd like to be able to put the waiting updates on and put W10 on sometime later this year. I don't understand why I am being forced to do the upgrade.
View 12 Replies
Sep 11, 2015
Running windows 10 my system seems to crash after or while updates are being installed. Yesterday after getting it up again I somehow found a list of failed updates. Today I cannot find them. Where the list of successful or failed updates can be found?
View 8 Replies
Aug 6, 2015
I am not sure I want to install just yet, there are some issues I need to check on first so I need to delay the install.
Is there an option to cancel without removing the download or is the only option to not accept the EULA and would this cause problems later when I have decided to upgrade?
My main concern is that as I have used CCleaner and Disk Cleaner since installing W7 around 5 years ago. Will W10 be able to revert back to W7 or will the installation files have been removed in which case reverting back may not be possible?
View 3 Replies
