Installation :: Partition Locked - Tried To Install X64 (bootmgr Missing)
Oct 6, 2015
As IE11 was malfunctioning, and my GT610 driver doesn't seem to work properly in Win10 32 bit, I attempted to upgrade to Win 10 x64 on my machine (Dual core, 64 bit ready, 4GB ram), and whilst doing so I think I've deleted the C: boot partition. I had partitioned the C drive and put the data in F: drive partition before hand so I didn't lose all my data.
When rebooting, I got the message "bootmgr is missing", so tried to boot from a Win 10 32bit iso DVD. I can get the DVD to launch, and tried to go through a repair, but got the message that the drive/partition was locked. I can't repair it, or boot. I also tried fixing it using Minitool Partition Wizard, which shows the partition without a label and as "unformatted". wasn't sure whether I should format the partition or not.
what I can do, to unlock the drive (from command prompt?) and then reinstall or repair Win 10.
Can I keep the F: partition with the data on it whilst doing an install of the x64 bit windows, or will I have to reformat the whole disk because of the different architecture?
View 9 Replies
Similar Messages:
Sep 9, 2015
I have Macbook with Yosemite. I had installed win7 32bit Home basic, later on upgraded to win10 64bit.I have recovery drive of win10 on usb flash drive.Now while I open win10, it shows "BOOTMGR missing restart.What is the solution to get win10 back
View 1 Replies
Feb 10, 2016
Got a new Samsung SSD, used the software that came with it to move C to new drive. Ended up with msg "Bootmgr missing". Reinstalled original hard drive, got the same msg. Pulled out SSD, hooked it up to my laptop. Looked at it and the software cloned C drive but the sequence is wrong. It has the 450meg partition first, then the UEFI partition and then the Primary partition. Is there anyway to move the partitions to the correct sequence? I can get into the BIOS but I can't do anything mouse, keys,tab nothing will work so I can change the boot order to my DVD drive to install a fresh copy of Windows.
View 9 Replies
Aug 9, 2015
I used TrueImage 15 to clone and shrink my win10 load to a new SSD. Original drive was a 1tb with 120g used in a 900g partition. I had TI clone and shrink that to the 240g SSD. However, the bootmgr was left behind.
I used EasyBCD 2.2 to put the bootmgr back but now it seems to be still missing a few secret win10 parts and asking for startup repair.. Can I use the downloaded win10p64 cd?
View 6 Replies
Jan 8, 2016
I started my PC this morning and was greeted with a BootMGR missing error, i followed a few things online including going into the CMD and entering the following codes;
bootrec /RebuildBcd
bootrec /FixMbr
bootrec /FixBoot
They didn't work so i've decided it would be easier to just reset my OS, however if i try to reset i'm told i haven't enough space in my C drive. So how can i make space without being able to go into my PC properly?
View 1 Replies
Aug 15, 2015
Recently installed my new A10-6800K CPU, worked perfectly. checked my system information to make sure everything was at the versions they needed to be, noticed that the MoBo (gigabyte f2a68hm-hd2) version was from 2014 so i updated it to the latest version but delayed when it asked me to restart. everything carried on as normal
got back from work, turned it on. bam,
"BOOTMGR is Missing
Press Ctrl+Alt+Del to restart"
I tried pressing them on wireless keyboard - it didnt work. tried it on my wired keyboard - didn't work.
I tried putting the windows installation disk in and restarting it - didnt work.
I think it was the MoBo update that did it...
Specs:
Windows 10
Gigabyte F2A68HM-HD2 Motherboard
8GB DDR3 1600mhz RAM
1tb Seagate Barracuda Sata
A10-6800K
EVGA GeForce GTX 750ti
Unplugged internal HDD and put the installation iso on an ext. HDD.. manages to get onto installation part (it complains that it cant install it on my ext. hard drive)
View 1 Replies
Feb 1, 2016
I just finished building my first ever PC. I am using the education edition of windows 10 if that makes a difference. I downloaded it to a blank flash drive I had lying around via this link: [URL] .... When I tried to install windows, it said "bootMGR is missing". I set the flash drive to boot first in BIOS but it still doesn't work. I am wondering if it has to do with formatting or something like that.
Specs:
i5 4690
MSI z97 PC Mate LGA1150 Motherboard
G.Skill Ares 8GB RAM
NZXT Phantom 410 Case
Sapphire R9 270X 4GB GPU
Western digital caviar blue 1TB
Zotac 120GB SSD
SeaSonic S12II 620w Power Supply
Asus PCE-N15 PCI Express Wifi Adapter
View 1 Replies
Jan 13, 2016
My original os is win7 then i upgraded to 10... After a while of using it... It opens the Blue screen saying unmountable boot volume.. Also i dont have win7 cd since the os was built in...
Next i rebooted it, it says "preparing automatic repair" i tried to wait.. But after it says that, it goes to a black screen and nothing happens
Then i tried dloading the iso from the site and then burned it to a usb.. Then it says
Press any key to boot from USB
*presses any key*
BOOTMGR is missing
Press ctrl+alt+delete to restart
Is the problem in the usb or it just wont open because of the error?
I only have recovery disks on win7
My laptop is Vaio SVE111A11W
Cant open my laptop due to this so i cant really attach the needed files..
View 9 Replies
Dec 12, 2015
I did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
View 6 Replies
Jul 29, 2015
Stupid question probably, however I cannot find an answer online and I'm not the most tech savvy.
I bought a HP laptop around Christmas last year. The laptop came with a recovery partition, which I still to date haven't got around to getting a 32gb drive to back it up to.
I stupidly left W10 installing this morning when my upgrade was offered, but am worried now that the partition with my recovery may be deleted and I may no longer be able to get that onto a drive in case I ever need to re-install the laptop.
View 1 Replies
Dec 6, 2015
I am building a new computer next weekend and have three drives and need partitioning strategy for 3 drives:
- Drive 1: New 256GB SSD m.2 pci-e SSD for Win10 and apps (autocad, sketchup, Adobe CC, rendering apps)
- Drive 2: Old 2010 Vertex SSD which is 90-120gb (can't recall) for scratch disk/win page file for Adobe and apps
- Drive 3: New HGST 7200rpm 4TB 3.5" HDD for files, pics, video and possible system image ( necessary on Win10?)
1) I plan to format all 3 drives as NTFS unless there is strong suggestion to do otherwise?
2) what is best partition strategy for Drive 1? How much GBs for partitions for Win vs Apps? Is 60GB adequate for win10 partition leaving just under 200 GB for apps?
3) I read on win website to create 3 partitions for sys in this order: utilities; sys; win recovery. Does default win setup do this automatically or must I specify how many partitions and in what order and in what size? I'm clueless on this.
4) Disk 2: how much risk am I taking by using 5 yr old SSD for scratch disk? The virtual memory is volatile anyway so am I just risking each current session? I plan to point page file, cache, scratch to this drive. If too risky, I presume that using boot SSD as scratch is better than using HDD #3?
5) Disk 3: does win10 still require that user do image of opsys for recovery (using acronis et al) and, if so, how many GBs do I partition on Disk 3 and if so does it matter if it is the first or last partition on this drive 3?
6) what win 10 should I get? At Fry's they have OEM and also USB flash drive?
View 9 Replies
May 12, 2015
Since I had trouble with the upgrade with Windows 10 running very slow i'd like to try a clean install, but i'm weary because I am afraid it will wipe my 8.1 main partition and not roll back. I'm using this as a guide, but need to make sure i'm doing this properly. How to install Windows 10 - clean install, dual boot or VM | Expert Reviews
View 5 Replies
Aug 12, 2015
I've already upgraded to Windows 10 on my desktop PC, and there were no issues with the upgrade. However, I work from home and my work has informed me that they won't accept Windows 10, they will only accept 7 or 8.1 as their operating system (they also only accept Internet Explorer for browsing, etc.). So I can either downgrade, which I really don't want to do, buy a second PC, which I can't afford to do, or (I'm hoping) create a new partition and run Windows 7 from that.
So my question is, is it possible to create a new partition for Windows 7 while running Windows 10 on my main partition? Will I have to downgrade and install Windows 10 later? Or can I do it from Windows 10 already?
View 2 Replies
Nov 18, 2015
Does not meet system requirements
Get Important updates: cleared.
Gets windows 10 ready but then it
Checks requirements:
Windows does not prompt any choices,
We couldn't update the system partition
Dialog crashes.
Does not allow one to choose which partition
Gateway Nv59
64 bit Intel 430m Duo core
Windows 7 Premium
500GB hdd
8GB Gskill ram 1333mhz
Take note here that I cannot merge any of the disks, they all result in error or System lock. I can't make the 35MB system disk larger, but Easeus, Windows disk formatter and some other major ones I've tried just say No. But the problem is windows 10 doesn't give me the choice to overwrite the C or H which is quite large enough.
Take note that i just used the SAME flash drive to boot/install windows 10 to a friends lower spec Intel i3 laptop with 1/2 as much ram from Win 7 BASIC. Don't tell me It's not powerful enough..
View 9 Replies
Feb 23, 2016
I have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
View 3 Replies
Aug 20, 2015
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition remain or, as I thought I read, Windows will format the entire disk?
View 1 Replies
Jul 30, 2015
I originally made a USB key which booted fine, but could not install on any partition on two different PCs and 4 different drives. It gave the error message "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files." Tried different hard drives/partitions even a completely blank drive.
Did the usual wipe all partitions (on the two drives that are blank). I re-ran the MediaCreationToolx64 to make an ISO and now it is installing correctly. Is there a US English location I can download somebody's image of their USB drive or just try the 2 hour download again?
AND is their an explantion other than something went wrong creating the USBKEY? It is a brand new key (it is 3.0 but the ports are 2.0).
View 3 Replies
Sep 30, 2015
I read that a clean install rebuilds partitions and makes a recovery partition.
My question is does it allow you to pick the size of the partition that Windows 10 is installed to ?
I have a 1 terabyte drive but like to install in a 100gig partition.
I think I will delete the existing partitions before I start
View 2 Replies
Aug 6, 2015
I get the error message: "Windows 10 couldn't be installed - We couldn't update the system reserved partition".
View 9 Replies
Oct 29, 2015
I did an upgrade from W7 yesterday. Put the computer to sleep overnight. This morning it wants some password. What it wants as I did not explicitly set one. How do I get into the system? Do I have to reinstall W7 then do an upgrade again? I never set any passwords on W7 as all of my passwords are in Keepass.
View 3 Replies
Dec 11, 2015
So here is my issue I had Windows 10 installed on my Asus which I had Upgraded from Windows 8. However lately my computer was running slow and unresponsive at times. I figured I would do a Factory Reset and start new on it to try and fix these issues I was having. However when I while in the process of Reseting my Laptop the reset had failed. Now when I turn my laptop on it just sits at the black screen with the Asus Logo. I have tried many solutions to this such as hitting delete prompt and resetting my start up settings.
View 2 Replies
Sep 17, 2015
SP3 has been acting a bit funny lately and went to restore and it says the recover partition is missing. I am pretty sure I never deleted it.
View 3 Replies
Aug 18, 2015
Have been locked out after upgrading from W7 to W10. No Microsoft account.
View 9 Replies
Sep 20, 2015
Current situation: MS SP2 that does not boot, and the ssd is not formattable because it seems locked (same lock as when you hibernate the pc)
I tried to upgrade from W8.1 to W10 with the upgrade tool in Win8 on a MS Surface Pro 2.
The computer hangs on 56% so I reboot. It tells me "the installation is failed, so go back to win 8". I accepted.
From there it showing infinitly "Restoring previous windows version".(It shown in dutch, so maybe it a bit different in English.
It is in this state for a month now and I tried everything listed below.
I tried creating a Win 10 disk, and do a fresh install from there. Result: Cant get the drive to boot
Tried creating a Win 8 disk. It boots, but it won't let me format my C-drive. It seems to be locked because it failed the recovery to the old Win8 install. I can remove all the partitions, but it gives an error when I try to install on a newly created partition. After a reboot, all partitions are back.
I tried booting to command prompt with windows 8 usb disk and remove the partitions with diskpart. It failes the format command. "attri disk" does not show read only
I tried an ubuntu live disk. It does not show my NTFS partitions
So the problem is: I can not access my data, but I accepted it is lost (and I copied some things via command prompt)I cannot get into windows. It wont let me install windowsI cannot format my harddrive. I can not remove the harddrive because I cant open the tablet without breaking it.
One of the things I thought is to make a USB with win10 running on it, but most of my flash drives are to slow and booting from a Sandisk extreme 32gb seems impossible.
View 9 Replies
Jul 29, 2015
OK, so, I finally got the install for Windows 10, and boom, it restarts into it's happy special circle with a percentage, explaining that it's this many percent done, I step away, and when I come back a couple minutes later..
View 1 Replies
Dec 30, 2015
I made a 100gb partition because I was going to try and install Windows 7 and have it as a 2nd OS along side Windows 10, but about half way through the computer restarted and I can't boot into Windows Setup. That's fine, I changed the default OS and made Windows 10 be chosen instantly on startup. Although in disk management the (Windows 10) Windows C: partition says Boot, I'm not really sure whether or not it's safe to delete the Windows 7 partition.
View 1 Replies