Downloaded Windows 10 and started installing it. The install got to around 20% and now I'm stuck on a black screen with "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key". I have gone into BIOS and changed boot order around but it doesn't seem to make any difference.
View 1 Replies
I am getting that error at splash screen after failed dual boot install of Debian. It was on the same drive, but I do not have another PC to get a boot repair or any other tool. I could go to a friend as last resort. Tried setting bios, still doesn't work.
View 4 Repliesyesterday I opened Windows 7 iso file in my Windows 10 operating system, and pressed 'Install now', I immediatly cancel the operation, and a new partition showed up next to C: drive, I knew nothing about system partition yesterday and I though Windows 7 installation reserved it, so I erased the 2 folders that had inside (EFI and Boot). But the partition still existed, so I restarted the PC and now shows: "Reboot and select proper boot device" (Windows 10 no longer boots).
I tried to fix it with Windows 10 USB iso's troubleshoot and everything failed, so I tried using the Command prompt tool but couldn't do much with it.
I try and go into the bios to change the order of the boot devices but my keyboard start to turn on with flashing leds like normal then just turns off.
View 1 RepliesWhen turning on my computer today, I had to face a BSOD with the error name being "System Thread Exception not Handled", which prevented me from launching Windows 10 in either way. So I rebooted my computer on my Linux Mint partition in order to look on the internet the solution to this error. I then created a USB bootable with Windows 10, so I can access to the troubleshoot kits. However, when I launched my computer again on my USB key, I found myself in front of a black screen with words saying "Reboot and select proper boot device".
Things get quite weird from now, because when I try to boot from my SSD where Windows 10 is installed, I no more have the previous BSOD, but always and always this black screen with the same message. I do not know how to do now in order to access to Windows 10 again.
Unfortunately, being unable to access to Windows 10, I can't give you a DM Log Collector.
After installing a 32 bit windows 10 from a USB by mistake I decided to upgrade to the 64 bit version. I have 3 hard drives, one of which is an ssd that I am trying to install the OS to. After downloading and setting up the media creation tool and creating a USB I restarted and boot form USB.
I followed the steps and deleted the existing windows 10 partitions on my dad and tried installing straight to the unallocated space. After the installation completed it restarted the installer, which is not what happened when I previously successfully install windows 10. I then changed the boit order to have my ssd first and rebooted, which gave me the Reboot and select proper boot device or insert boot media error.
Confused I loaded up the installed and there were correctly partitioned installs already on the ssd ( although one partition looked a little small). I tried reinstalling windows 10 with the same result over and over.
My custom-built pc all of a sudden won't boot in to windows. i get the error message "reboot and select proper boot device or insert boot media in selected boot device and press a key", and i have made sure that my hdd is my first boot option. i want to reinstall windows now because that seems like the only way out, but i cant because i have no recovery usb or disc. what can i do to boot to this harddrive, that my bios detects just fine.
View 1 RepliesI can not provide a crash log or a screen shot because I can not get past the Repair/Diagnose loop.
My Windows 10 pro has been running just fine until yesterday when I did an update. After the update and reboot, I get stuck in a loop stating the system cant start because of "Inaccessible boot device". It goes thru a process of restarting itself and self diagnostics and repair, but it keeps looping without fixing itself. I do get to select options such as boot up in safe mode but it wont, it goes back in that loop. I can boot into the Bios, I have an SSD that has always been set to ACHI mode, and it is. I just cant get out of this loop?
The only fortunate thing is that I have backup image files, so I do a quick secure erase of the SSD and reload the image fresh. All goes well until I do the Windows update, then reboot into this problem. I disabled Updates for the moment and spent a lot of hours on Google and YouTube, nothing I found so far has worked, so I figured I would try a fresh start here.
so I went from windows 7 to windows 10 reason behind it was because being new.. I thought I would reset everything as it was going slow and now it is just showing the
inaccessible boot device
I am trying to change the settings on the esc start up but it's not showing things I can change?
I have an Acer Iconia Tab W500 running Windows 10 Pro. Everything works perfectly except Windows does not exit tablet mode when the USB keyboard is attached. Is there a method for selecting a device that can switch the PC back into normal mode?
View 4 RepliesI have a dell xps desktop. It came with a standard HDD with windows 10. I added an SSD when I bought it and have used that for the OS and applications, I was able to set it to boot to that drive, I formatted the HDD that came with the computer and used it as storage. This has been the case for around 3 months. Yesterday, the storage drive (the one that came with the OS and whatnot) was wiped with killdisk, not just re-formatted.
Once the kill disk was completed I was still using the internet as usual with the SSD, since I had it as primary. I noticed I didn't see the storage drive listed under computer, so I rebooted. Now, It wouldn't boot to the ssd because I assume the original HDD has the boot manager on it, but the whole disk was zero'd. I installed 8.1 onto the HDD. I can now see my 224gb SSD in disk management. I just want to know how to make the ssd the exclusive drive that runs the os, boot manager etc on this computer. Here is a pic of my disk management ....
I did a reset on my windows 10 laptop and since then when I turn on the computer, a blue screen appears which says inaccessible boot device and the computer restarts itself and the blue screen agin.. I tried to creat media creation on a memory stick and boot the computer from stick, but the memory stick is not recognised, the only option in the boot menu is windows boot manager.
View 5 RepliesI upgraded from Windows 8.1 to Windows 10 a little over a week ago, and was experiencing a few issues, so I decided to do a reset, choosing the option to keep files yet remove apps and settings. The reset reached 100% and the PC restarted, but I got an "invalid boot device" error saying that the system must restart. After restarting, all that appears is a black screen, with no options available. I've tried numerous keys but nothing happens. The computer just sits on a blank screen.
I have a Gateway SX2110-UB25 that is merely two years old, that came with Windows 8 but upgraded to 8.1 prior to upgrading to 10.
CPU/GPU: AMD A10-7850K
MOBO: MSI A78M-E35
SSD: SanDisk Plus 120GB
RAM: EVGA 8GB 2133MHz
PSU: EVGA 80+ 430W
Monitor: Acer G237HL bi
I installed Windows 7 Home Basic and did all Windows updates; this went fine. Reserved Windows 10 and downloaded/installed it when it was ready; this went fine. Once in Windows 10, tried to "reset this pc" by choosing "remove everything" and "just remove my files"; this went fine until doing a restart after reaching 100%. This issue being the "inaccessible_boot_device" error that many others have gotten which causes the PC to enter a restart loop.
Well, during this loop I made the (apparent) mistake of turning off my PC. Now, I can't even boot my PC at all. I get a black screen. I can't use the Windows 7 disc, can't use my MOBO disc, can't even boot into bios... nothing. All I see when I turn on my PC is literally a black screen with nothing on it.
What can be done to fix this? I've read that putting Windows 10 on a USB by using the Microsoft media creation tool and booting from that to clean install works, but if I can't even boot from the Windows 7 disc, how can I boot from a USB? And I can't even enter BIOS to force a USB boot.
My PC will now boot into the "inaccessible_boot_device" error blue screen and does the restart loop. Not sure what I should do now. I'm afraid to power off my PC again.
Not sure why, but I was finally able to boot into BIOS. My only guess would be that, maybe when I tried(but failed) to remove my MOBO battery, just from me wiggling it caused it to reset? Idk.
Anyway, once in BIOS, I changed boot priority to DVD and was able to access reinstalling Windows 7. I am right now reinstalling Windows 7, on Disk 0 Partition 2(if that matters. wouldn't even allow me to install on partition 1 or 3).
So, from the looks of things, everything is back to normal? I should be able to finish reinstalling Windows 7, do the updates and redownload/reinstall Windows 10 without issue? Though, this time I will NOT attempt to "reset this pc".
I'm back into Windows 10. So, I'm still not sure why I was finally able to boot into BIOS, but once I was able to, I changed DVD boot drive to top priority and was able to reinstall Windows 7 from the disc. I then did all Windows Updates. I then downloaded the Windows 10 ISO and mounted/installed it with Virtual Clone Drive. I am now back inside Windows 10, hoping nothing else goes wrong.
I am converting an existing Windows 10 Pro laptop to RAID 0 - and I keep getting to the final boot where it says INACCESSIBLE_BOOT_DEVICE. What am I doing wrong? The laptop has two 1 TB Samsung 850 SSDs that are identical. Laptop is a HP Zbook 17.
Here are my steps:
1. Made a good System Image of C: drive on separate external SSD drive connected by USB. D: drive didn't have anything on it to be saved.
2. Used Win 10 Pro DVD to delete all partitions/format drives.
3. Went into BIOS and changed from AHCI to RAID, and also to turn on ability to do Control-I to get to Intel RST ROM.
4. Rebooted, did Control-I, created a RAID 0 of the two disks.
5. Rebooted, installed Windows 10 fresh. Verified it would reboot on its own.
6. Rebooted, went into Repair on Windows 10 DVD. Selected external SSD image to do image restore from.
7. Rebooted - verified on Control-I that the RAID 0 array is listed as "bootable"
8. Rebooted - get INACCESSIBLE_BOOT_DEVICE.
The place it dies - I see the little Windows 10 blue window, and the spinning circle at the bottom - then I get the blue screen with the message.
in windows 10 when I trying to safely eject the USB it says that the USB device is already in use (which is not )and if I'm removing it forcely the pc freeze and I'm getting the bsod with the error: inaccessible boot device and then my pc turning off I tried to format but it still happing I had no choice to go back to win 8.1 and there everything good (also it happing with some USB devices but some are working to but still .
View 1 RepliesI just canceled my Windows 10 download request because of "Secure Boot." I find it's very disturbing to work under its conditions of inflexibility. Without an option to select or deselect, Secure Boot is an irrational restriction on the individual.
View 3 RepliesI am running Windows 10 on my Lenovo Flex 3 15.
My problem seems a little complicated so I'll go step by step what happens:
1. I plug in a USB device to use it (like a flash drive or a printer)
2. Windows makes the "device recognized" sound
3. Nothing happens, so I go to device manager to see if the device is actually working. It's listed under "other devices" and it says "The drivers for this device are not installed. (Code 28). There are no compatible drivers for this device."
4. I reboot my computer WITH THE USB DEVICE PLUGGED IN and all of a sudden and without explanation the device manager recognizes the device and its driver and I can use.
5. I unplug the device and plug it back in and it goes back to step 2.
6. Also, when I click "update drivers" it cannot find them automatically and when I search for the driver manually it just gives me an error saying it did not install successfully.
This is such a frustrating problem because it means I have to reboot every time I need to use a printer or a flash drive. I also have tried everything I can think of: uninstalling every last trace of the driver and trying to let it install freshly on its own; checking the status of Plug and Play; etc.
I have my PS4 and Xbox One connected to my second screen with HDMI and from my screen I have 3,5 audio cable from screen audio output to motherboards soundcards line-in and in windows I listen to line-in device.
It works when i activate option "listen to this device" in control panel until I restart computer.
If I have option "listen to this device" checked when I restart it won't work until I uncheck that option and restart again or restart audio services.
I have two soundcards one on motherboard (Realtek) and Creative Soundblaster Z and sound output seems to work because I can listen to music and watch videos but I can't hear anything from line-in.
I have installed new drivers and clean install on windows 10.
I have this problem when i want to install win10 from by bootable usb It says Select the driver to be installed.
how to fix?
When selecting "Upgrade This PC", is there a way to get the "Select language, architecture & edition" screen to show up? I went through this process on the computer before, but I selected the wrong edition. The process eventually just stopped (closed the window). When I try to run the tool again, it just goes straight to the "downloading..." part of the process.
View 9 RepliesMacBook late 2009 running parallels. Originally upgraded when Win 8 was installed. Win 10 upgrade loaded Home. Removed Win 10, upgraded to Win 8.1. Now when I try to reload Win 10, it will not install Pro, only Home.
When I go to change product key under activation, it will not let me change serial number. (Old Win 8.0 Serial Number)
Clarification: Cannot even select change product key. I only get a "ding".
After installing windows 10 build, I see a boot selection menu each time I reboot your PC. When I get to this screen, if I do nothing it will automatically boot to the Windows 10 Technical Preview within 30 seconds by default. Why is it happening.
View 14 RepliesUpgrading from windows 7 to 10, started install at around 10:30am and left it....around 2:30pm it started the large circle with the % in the centre, and again left it for another hour or so and came back to a black screen, no cursor or anything.
I waited until about 7:30 and still nothing and did a reboot by holding the power button down. On restarting, I get the windows 10 logo with the spinning dots, and then it cuts to black with no cursor. The CPU light does what it would usually do on startup, and when it first cuts to black but then the screen seems to change to a different black (if that makes sense?!) and the light only blips extremely quickly with a long period before it blips again
i know this is another update gone wrong post but I can't seem to find any with the same problem, just similar ones. I've read it can take a long time, but it's been nearly 11 hours and is very frustrating!
i'm not mega pc savvy, I get 2 options when I boot, and I've looked and there's no option for me to do a safe boot, or to revert back go windows 7. If I leave it on black screen for too long it automatically goes into sleep mode.
Ok recently my pc has been crashing like crazy and I got tired of it so I decided to reset my pc (I have windows 10) but after I did so it would try to restart and it kept saying it ran into a problem (INACCESSIBLE BOOT DEVICE) and it would reset again and it would keep doing that in an endless loop.
So I figured all the crashing before was because of motherboard. Gigabyte ATX Socket AM3+ AMD 970 Chipset. So I recently bought a new motherboard.A MSI 970 Gaming mother board. But its still keeps showing the screen that keeps saying it ran into a problem (INACCESSIBLE BOOT DEVICE) in a endless loop. Does this mean I need a brand new clean hard drive that doesn’t have windows installed on it so it can act like a brand new computer or what?
I have been trying for hours to install windows 10 home on my newly built PC but i can't because there is a problem. I bought the usb version since i don't have an optical drive bay.
The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.
I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!
I have made a video showing what happens (win 10): OS installation problem - YouTube
I also made a video that shows my BIOS: Gigabyte GA-Z170X-Gaming 3 BIOS - YouTube
