My present Windows 7 computer has the C: Drive (OS) and two additional storage drives, D & E. When getting reading to do a clean install of Windows 10, is it necessary to electrically remove the storage drives in case of any conflicts, if any, during the installation of Windows 10 or can they remain intact during the clean installation of Windows 10?
View 8 RepliesI bought a new SSD drive and used it to replace my old slow HDD in my laptop. I have just successfully installed windows 10 on it.
During the step shown in the picture below, I clicked on "New"
Which brought me to this step
From here, i just chose "Drive 0 Partition 4", clicked "Next", and the installation began.
Now here is my question, does it make a difference (or is it better) if I had chosen to format "Drive 0 Partition 4" first and then install? cuz my friend is saying that I should always format before installing Windows.
Basically I only use my SSD for windows. When I upgrade from 8.1 to 10 I want to do a clean install, will I also need to format my 2tb HDD ...
View 1 RepliesI have a problem in the installation of Windows 10. I have a CD installer of windows 10 pro 64 bit and I want to replace my Windows 8 OS thats why I perform a clean install. But whenever I try to install the OS. I have this error:
"Windows cannot find the Microsoft Software License Terms. Make sure the installation sources are valid and restart the installation."
I recently upgraded my Windows 7 laptop to Win10. However, before I did the upgrade, I did a clean factory install of Win7, kept installing Automatic Updates until I get the option to Upgrade to Win10.
I have a 500gb HDD, that is partitioned in to two, C: for OS and D: for Local Disk (storage), currently the C: drive is 58.5gb, of which I have 13.5gb left, this is with having only Windows 10 installed AND Printer Driver and Software.
Is there any benefit of creating the Windows 10 media disk, reformatting with this Win10 disk, and getting rid of any of the rubbish that might of been installed in the process of doing a clean install of Win7.
OR re partitioning the Drive, so I can steal some of the storage from D: and give it to C: . I have 397GB of unused space on D:
I also just noticed, it states I have a Partition called RECOVERY, however, I don't seem to have this on My Computer view.
I have Aspire V5-573G, which has all hardware requirements for Windows 10. The problem is when I tried to upgrade from windows 8.1 to 10 after 30%, the installation stops and roll backs to windows 8.1, I tried this 3 times and fed up. It gave me error "The installion failed in the FIRST_BOOT phrase with an error during BEGIN_FIRST_BOOT operation".
So I tried to do a clean install, I have booted to USB key, formatted hard drive, but it gave me error "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x800701E3". Both the way I couldn't install windows 10.
I have a Acer Aspire which is bought 5 years back.It was running windows 7 ultimate x64 and has 2 gb ram and 500 gb hdd and intel pentium.Three monts back,there was an unexpected shutdown and when started it again,it shows an error and says that
1.Try installing media using usb stick or dvd and
2.Go to the language preferences and select any language and press next
3.And click on repair your computer
I tried doing that and it says that contact your device administrator
Finally,i tried installing windows 10 pro which was download from Windows 10 and there was a slow progress in"Getting files ready for installation 1%,2%,3%............"and at 33% it showed an error that "Windows cannot install required file.Make sure all files required for installation are available,and restart the installation.
Error code: 0x8007045D". I burned the iso through "isotousb" software.
Asus laptop : Ux305
Download ISO from media tool creation, then using rufus to create bootable usb
After run setup, this error pop up
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
My laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
View 2 RepliesI'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
View 6 RepliesAll the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
View 6 RepliesSo I did a clean install of windows 10 because my computer was running slow, but now I would like to downgrade back to windows and I don't have the "windows.old" because of the clean install.
Any way to downgrade to my old windows 7.
I originally followed the path to upgrade my 8.1 Pro to Windows 10. Everything went fine and I created the USB during the process. Activation was OK.
Then after a few days and some unusual problems I reloaded my last Image of 8.1 Pro.
Question is Can I go back and just do a clean install since I have already did the upgrade process?
Second PC with Win 7 Pro 32 bit was a struggle...but succeeded in Brinks clean install and activation of 10...but was a real struggle.
Now...how can I transfer the new 10 install on an HDD to a new Sata SSD in the same box ? So far haven't figured out how to make the SSD with an installed image of the new 10 install from HDD to boot from the Sata at PC startup ?
What am I doing wrong...and how do I get the SSD image of my new 10 clean install to boot from the SSD ?
I think it has to do with partitions and active Windows partition but don't remember what/how to change the boot disk to the new SSD....
I upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
View 9 RepliesI did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
View 6 RepliesI got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
View 9 RepliesI'm finally thinking to upgrade from W7 to W10.
Here's the situation at the moment:
1) 256GB System SSD
2) 1TB data HDD
3) 3TB Raid 1 HDD for backup
I want to mount a new 500GB SSD as primary system drive, so I was thinking to use this occasion to put W10 into my machine.
So my question is: Can I update to W10 as it is and then do a clean install changing the primary system drive while keeping the license?
My Wife is a Windows 10 Insider, and would like to clean install the latest Insider build on a new HDD, replacing her current Insider installation. What would be the easiest or best way for her to do so?.
View 2 RepliesI got a HP Notebook yesterday that had Windows 8.1 on it. Today I decided I wanted to reinstall Windows 10 (not upgrade, but clean install) on it and I do have experience in reinstalling operating systems. I reinstalled Windows 10 from a USB stick and when the computer restarted after the installation was done, it would keep booting from the USB stick. I exited the installation screen and then went to the BIOS to change boot priority to "OS Manager", but all I got was an error which I don't remember what it said, and then it just restarted again.
So my question is, how can I get Windows 10 to boot after is has installed and restarted?This is my laptop: HP 15.6 Laptop - Black (Intel Celeron N3050 / 500GB HDD / 4GB RAM / Windows 8.1) : Laptops - Best Buy Canada
I successfully upgraded from Win 8.1 to Win 10 (both Pro 64-bit) in PC's old HDD. Now I want do a clean install on a brand new SSD. I have a few questions before I buy the SSD.
1. First off, is it possible to do a clean install of Win 10 in the new SSD especially after I upgraded from Win 8.1 to Win 10 in the old HDD?
2. If 1 is possible, then at any point do I need to enter the Win 10 license key? I have used a Win 10 license key viewing tool to find out what it is.
3. Should I use the Win 10 Media Creation tool to create the ISO or just download an untouched Win 10 Pro 64 bit ISO, burn it to a DVD and do a straightforward install?
4. What happens to the Win 10 in the old HDD? Does it get deactivated on its own?
My computer has been upgraded to Windows 10 and activated. I have a non-bootable DVD Windows 10 ISO. Is it possible to do a clean install with that non-bootable DVD disk? Any alternative to do a clean install?
Heard imgburn can create a bootable DVD ISO, but after downloading the software then found it is infected, and decided not to install it.
I haven't tried it myself (as I upgraded THEN did a clean install before this article appeared) but assuming it works this can be a big time saver.
View 4 RepliesA year ago I bought a Lenovo Yoga 2 that came with Windows 8.
Unfortunately, I upgraded to Windows 10 several months ago. It has been such a nightmare I want Windows 8 back.
Can I just buy a new copy of Windows 8.1 and clean install it on my laptop? Someone told me once its been upgraded to Windows 10 that I can't do that, but that just doesn't seem right.
I'm not very savvy when it comes to doing a reinstall. I'm not sure what to buy and I want to make sure trying this won't brick my computer. OEM, Full, etc seems like there is so many things to consider when trying to buy just a regular old version of Windows 8.1 ...
I've upgraded from windows 8.1 with uefi bios, so basically now i can do clean install 10 without product key? But the real question is: My pc have 8 partitions, the primary one, 5 of recovery, 1 oem and 1 efi. Can i delete all partitions and create only one?
View 6 Replies