In ADMIN TOOLS|COMPUTER MGMT|DISK MGMT the following are listed...
C: 952 GB
"healthy recovery partition" 450 MB (the box is shaded)
"healthy recovery partition" 449 MB
D: 909 GB
How can I get rid of the recovery partitions (or at least one, if the other is required) and reclaim the unused space for C: ?
is there any way to remove all that useless space created by the at a glance menu?
View 2 RepliesI have a Lenovo laptop with a non-upgradeable SSD. I have installed the update from Win 7-64 to Win 10. All of that went smoothly. But now I have a 25gb directory named "Old Windows" on my C drive. Can I safely delete that directory to reclaim that precious SSD space?
View 1 Replies I have a Dell Venue 8 Pro with an upgraded Windows 10 installed. Always perform Windows Update but did not pay attention too closely. When the drive space was low and started looking a little bit closer, I found out that I have several Recovery Partitions. From Disk Management display, from left to right are the partitions:
500MB EFI | 40 MB OEM | 490 MB Recovery | C: OS 22.8 GB | 450 MB Recovery | 4.75 GB Recovery
The problem is I do not know which partition that Windows 10 actually created as its Recovery Partition. I do know that the 4.75 GB partition is my original Dell Venue 8 Pro Recovery Partition. Which one can I remove to allow the expansion of my C drive? What gives?
I have a Samsung 700T tablet (think Surface Pro). It only as a 128GB SSD, but I read about a trick Surface Pro owners use to add extra storage. You format an SD card as NTFS, don't give it a drive letter, then map it to a folder on your C: drive.
It works great - I've added a 128 gig SD card & essentially doubled my storage, but I'm running into one problem. Windows 10 doesn't count the SD card when it calculates free space. I have all my libraries mapped to the SD card, including my downloads folder. When I try to download something large, Windows reports there isn't enough space & Chrome refuses to download the file.
Is there any way to get the system to recognize the extra space?
So, I've had this 1Tb HDD lying around unused, so I had the bright idea of shoving it in place of my Dell Latitude E6410's original 640Gb HDD, use that in place of the old 60Gb HDD on my T60 (a mere 60Gbs just weren't enough to accommodate my Google Drive - running on Linux with InSync - and Mega cloud storage), and put my latest W10 Pro system image on the 1Tb in the E6410.
All well and good so far - except when I checked the partitions after I reinstalled the system image from the original 640Gb, this is what I got:
Which wasn't too surprising, given how Windows works. What I wanted to do was to expand C: into all that extra unallocated space, but as you can see, the recovery partition is in the way. I wouldn't be too surprised, either, if there was no workaround that doesn't involve reinstalling Windows.
I'm wanting to reinstall Windows 10 on my SSD. Before I do I'll unplug the additional drives I have inside my PC for storage (E: onwards), to isolate the SSD. However, C: (disk1 in the screenshot below) has several partitions and unlabelled volumes that I'm guessing Windows created. Do I remove all of them during the install process?
View 4 RepliesI purchased a Dell Inspiron 15 7000 with a 120GB SSD and a 1TB hard disk. I have the OS on the SSD (C:) together with the programs. So far I have installed Office 365 and little else. I have moved the data directories from C:Users to the D: drive.
The laptop came with no CDs or OS disks and Dell tell me none are available so I have created a recovery USB disk. At the end of that process it informed me that I could now delete any recovery partitions on the boot drive to create extra disk space. On trying this the option failed "Unable to delete partition". The reason for doing this is to recover the drive space used by 3 of the 5 partitions on the SSD. They take up over 32GB of the 120GB I bought. I've never needed to use a recovery partition and would have no issue with having to do a full install from CD or USB in future.
Disk Management does not have a "Delete partition" option for any of the SSD partitions. Would a re-install from the recovery USB stick allow me to delete all partitions on the SSD before re-installing or would they just get created again?
I have windows 10 build 1511 on a USB stick made by windows media creation tool now when install windows the drive has zero partitions.
When i install the copy from the USB stick i end up with 3 partitions one is 450MB (recovery partition) and another partition at 100MB called (EFI System partition) and last partition is windows 10.
Now if i delete all the partitions and install windows 10 from the USB drive again i get two partitions one at 500MB called (System Reserved) and the windows 10 partition.
Why if i install windows 10 multiple times i get different partitions being made?
I would like it to only make the two partitions every time.
I have attached an image of my Disk Management screen. Disk 0 doesn't look right to me. Is there a problem here? if there is, how do I correct this? I am running W10 and the C drive is a Samsung SSD drive.
View 9 Repliesmy question is about Partitions in Windows 10.
I have three-
100MB (created from Windows 7, which I knew was needed for booting)
C Partition (Windows instllation)
450MB (created after upgrade)
So, do I still need the 100MB? and what is this new 450MB used for? Disk Management says that is empty. I don't want to delete anything for risk of making my system unbootable.
My single ssd has the partitions shown in the attached file. This notebook was converted to win 10 from 8.1. I want to merge C: and D: into one volume. However to do that it appears that I need to have them adjacent. I tried to move the two offending small partitions but can't. Better yet I would feel better about just deleting them . Is there a way to tell what is in them? I don't care about recovering to win 8.1.
View 6 RepliesI've upgraded from windows 8.1 with uefi bios, so basically now i can do clean install 10 without product key? But the real question is: My pc have 8 partitions, the primary one, 5 of recovery, 1 oem and 1 efi. Can i delete all partitions and create only one?
View 6 RepliesWindows 10 Pro
Biostar TZ77XE4
I have been able to "successfully" boot the CD Drive into UEFI mode to install Windows 10 onto my new 4TB SSHD, but I run into the error were it stats that the partitions are not in the recommended order, when the ONLY partitions on the disk are the primary and the "protective MBR" before it at slot 0. Now, when I am in windows for the first time everything seems fine, but as soon as I restart after doing basic setup, I run into an issue where I cannot browse any partitions (I try to open "This PC", but it acts like it is indexing indefinitely and I never see the drive listing).
It looks like Windows 10 may not be appropriately setting the order for the partitions. the moment I left my original installation on my 1TB HHD intact, so that I can still have an operating PC, and find out some info on this.
I have upgraded my Windows 8.1 system to Windows 10 through the Windows update app and have created an installation media USB stick. I want to clean install, something I am very familiar with, but not since the new uefi, gpt, legacy etc. that I'm not familiar with. If I do a clean install and delete the entire disk, Windows will create the partitions and install the necessary "data" to run the computer correctly? I don't need to save the data on the hidden partitions that are present now?
View 9 RepliesAs the title say, is there any workaround to avoid creating 4 different partitions during a clean install of Windows 10?
Here is a sample of what I mean:
[URL] ....
I think one is necessary and unavoidable (the MSR one), but the other ones should be used for optional services that you may not require, like restore etc.
I couldn't find a work around yesterday and in the end I gave up and accepted those 4 partitions...
I recently updated from Win7 to Win10. Initially when updating I was encountering an error, which I resolved by splitting my SSD into 2 partitions using CMD (I found this information through other posts).
Now the SSD is in 2 partitions, one being the boot partition (C) and the other system partition (Y). Is it possible that these 2 partitions can be merged together?
I have a top spec HP Envy DV6 i7 laptop which had Windows 7 on it then upgraded to windows 8 then Windows 10. I have noticed that recently the machine has become really sluggish and Cortana is not working not matter what I try.
I have decided to clean install Windows 10 which I have on a USB stick but before I do that I noticed I have 8 partitions
See below:
What I want is to have just one partition and clean install Windows 10
So, how do I boot Windows from USB drive. How can I delete all the partitions and leave one...
After finishing the installation of the Threshold 2 update 10586.3, I seem to have grown an additional Recovery Partition.
How many of these do I need?
Will the excess one be deleted along with Windows.old after thirty days (or if I run Cleanmgr earlier)?
I've successfully installed Win 10 on 4 PCs with no problems so far, so I was asked to upgrade one of our office systems from Win 8.1 to Win 10. The unit was an ASUS with Win 8.1 OEM-installed and working, but missing almost all of the available Win 8.1 updates. All else looked good and Win 8.1 was working well. I updated the machine to current 8.1 maintenance level, and the 'Get Win 10' app appeared as expected. I did the upgrade with no problems, but then found that Win 10 Disk Management shows a very large C: partition (Win 10) and 4 small partitions marked 'healthy recovery partition'... and they all show 100% free space and have no drive letters. Right-clicking on those partitions offers no options. Is there no way to get rid of these partitions within Windows? Or will I have to use GpartEd or equivalent? These partitions must have existed before the upgrade because I have not yet created any Win10 backups or recovery disks. I do have the Win 10 ISO files handy, so as a last resort I can do a full drive format and a clean install, but I'm curious about what might be hidden in those mystery partitions.
View 9 RepliesUpgraded my Win 7 Ultimate x64 to Win 10. Now when I went to perform a clean install of the Win 10 with USB created from Microsoft Media, take me through to the screen to partitions.
There are three partitions, one marked as OEM. What could be this.
I put in new HDD two years ago and had done clean install of Win 7 then.
I had Acronis True Home Image 2012 but removed it prior this Win 10 upgrade
Am I save to erase all these partitions for my clean install?
Just bought a new laptop for my wife, it's an HP Stream 11. It is suitable for her light needs, basically web browsing and some light document work, word processing etc. She's not even going to store music or photos on there. A few very light files only. So it comes with 8.1 and I think, awesome, I can install 10 straight away (I've not used 10 yet so was quite excited by this).
However when trying to install it's telling me I'm about 2 gig short of enough space for 10. I have about 9 gig free and it wants about 11. The hard drive is 20 gig. I've installed Windows 8.1, removed a shedload of apps she doesn't need, removed some programs that she doesn't need (for example McAfee) and I'm at the stage where there's literally nothing on there but an 8.1 that is as barebones as I think I can make it. Looking at the programs installed, even if I removed Office and some HP crap, it will only get me another 500 MB. Is Windows 10 on this PC simply not possible?
Does it need the space just for the install process itself? Or on an ongoing basis? Because I have a hard drive I can plug in, in the short term, but she's not going to want it attached forever as it will be a little unwieldy for a laptop!
Just wondering looking at my partitions after upgrading to windows 10 . Do I need to keep the last too partitions? I love windows 10 and had presumed that after a clean install my old windows 8 and 8.1 would be removed are these last too files remainders from them and if so can i delete and how should i do so. Just took a snip of the partitions content!
View 3 RepliesI already have my pc updated with windows 10, I recently upgraded my hard drive with a samsung 850 pro ssd but i discovered that my recovery partition no longer works and when i try to do a system image windows says it cannot do it because files are missing . I used the samsung data migration software that came with my ssd, when i go to disk management it shows my three partitions which are
500mb recovery partition
260mb efi system partition
windows c 476.18 gb ntfs , boot,page file, crash dump, primary partition
My question is if I do a clean install of windows 10 will these partitions be created again during the windows 10 installation automatically or will I loose some . I want to be able to recover my pc should I need to and have everything working. Someone suggested that I don't need a recovery partition and windows 10 does not create new partitions .
I don't know what the efi system partition is and don't know if i need it . i have watched some youtube videos of people doing clean installs of windows 10 and they all seem to differ . during installation when given the choice of where to install windows some people delete all the partitions on their hard drive while others pick which one .
I have upgraded to Windows 10 a few months earlier from Windows 8.1, I have not checked my HDD arrangement after the upgrade. Now I can see that there are two partitions the "system reserved" and "recovery". Where these partitions came from? and Can I get red of them?
View 5 RepliesRecently upgraded to w10 from w8.1 via the upgrade option, then proceeded to make a USB boot with w10 and performed a clean install.
However, something is fishy with my system and w10 so for now i want to revert back to w8.1 via a clean install of w8.1
When i installed w10 however i noticed i have an abundance of partitions, and preferably i would only like to have my SSD and HDD as optional storage spaces. I do of course not want to delete any necessary recovery or system partitions, but to me it seems like i currently have too many.
Which of the partitions in the picture below can i delete? Is it safe to delete all the recovery partitions when clean installing w8.1 from usb? meaning that will the installation create the necessary partitions required by windows?
See picture for info(gjenoppretting = recovery)