Installation :: Restoring Image Using Macrium Reflect?
Oct 14, 2015
I am in the process of creating an Image of HP Pavillion DVT7 2200 Notebook now. getting some steps to follow to restore it. The Laptop I have Macrium Reflect running on now will have the HD replaced as it on the verge of failing hence why I'm doing doing.
I have physically swapped out the old HD with new HD? I will have Macrium Reflect Image contained on the root of a brand new 1 TB External drive. start at the point of turning the PC on for the first time and if I should have the External drive plugged in before I attempt to boot the laptop for the first time.
OK here's my scenario, I have successfully used Macrium Reflect to create images saved on a 1TB external drive. I had 2 good images stored on it and tried to put 3rd image on the same drive. Please note that I have used one of save images to restore the system after replacing the failing hard drive. The create image process runs to what I think to be the very end then comes up with msg: "an error has occurred, Please see the history log for more details"
I could not find this history log, but figured maybe there was not enough space on the 1TB drive to completely write the image file. On my next attempt to create the image, I used a brand new 3TB external drive and it fails the same way. I have attached a photo of the error, where the history file is? I have left laptop up and running after clicking ok, did not want to risk losing the history file by booting back up. BTW, on the 3TB external drive it did create a temp file named xxxxxx.mrimg.temp with size of 0 kb.
Been trying M. Reflect free edition on a Dell Studio XPS 8000. I did as usual and created a boot rescue CD with the PE file with no problem. Then I continued to make an image of my boot disk C and save it on my hard drive D.
Went to D and the image is there. Next I booted with the restore disk without problems, but after choosing restore, I can't find the image that was created on the D hard drive. I noticed that the naming of the drives also has changed and as such I looked everywhere but I can't find the image and as such I can't restore.
I have the latest free version of Macrium Reflect. I think that I can only get support from the Macrium site with the full paid version. Since the big Windows 10 update last week, I seem to be getting errors in the backup logs. I have checked the Macruim backup logs prior to the update and they are all OK.
This morning I had a computer crash . Somehow it got stuck on an upgrade . I Booted into system restore and tried to restore to earlier date. Error message came up indicating I had drive issues so I continued with the offer to scan and repair the drive. After drive was "fixed" by windows , I could not proceed with the restore by clicking on next. Its like I am getting an loop of disc errors. I went back to the restore dialog and then chose a restore point .Computer started Restoration but then had an error that indicated it could not restore due to some problem with candy crush ! I then shut down the computer . Restarted it and went thru the HP Diagnostics and everything looked OK so HP diagnostics let me restore the computer ...but this time I had to enter my password to my msoft account and the restoration went smoothly.
recently started using Reflect, moving away from TrueImage. I'm pretty happy with it so far, except for the outlandish price (yea, I know, free version fine for most but I like to password protect my images).
I notice there's an option to put the recovery on the boot menu, reminiscent of Norton Ghost.
I tried one again to use Macrium to backup only C:, clean install then restore only C:. Once again it did more that I asked it to and removed the 16MB partition created by the clean install.
After clean install I had this, 4 partitions on Disk 0 (SSD):
After restore I had this, 3 partitions o n Disk 0 (SSD):
I did not run the Macrium fix boot option after the restore so when I rebooted Win 10 ran Auto repair then the system booted up normally.
Why is Macrium doing this?
Guess I'll ask in the Macrium forum and see what I can find out.
The reason I'm doing this is is Shift Restart from Power is not working, it just boots normally.
I just redid the steps in Brink's tutorial to setup Recimage, then ran reagentc /setosimage /path "locationResetRecoveryImage" /index 1
I'll try Shift restart again now and see what happens.
I have two backup tasks that appear in the "scheduled backups" tab, and they run on schedule, but they don't appear in the "backup definition files" tab.
This happened due to an uninstall and reinstall.
How can I get them back into the "backup definition files" tab?
I still have the reflect folder in my documents, with the xml files that define the backup tasks. But for some reason, that isn't enough to get those tasks to appear in the scheduled backups tab.
Another minor issue: when I boot from the MR recovery partition, in order to run a restore, it doesn't know where to look for my backup files. I have to add the folder manually, and then it forgets again the next time.
I was installing W10 and got that black screen with the big white circle. Then, once it restarted. When it booted again, suddenly a screen came up saying "Attempting to Recover Installation" then saying "Restoring your previous version of Windows....". Why does this happen? Is there any way I can change where it boots into?
I just bought an HP Pavillion 15 ab15nr laptop with windows 10 and messed up the install of my programs. The factory recovery partition is untouched and as far as I know intact. How do I go about returning the machine to its factory condition using the Recovery Partition and starting over again? Boy, I miss having a Win7 type installation disk.
last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
I have several machine running Windows 7 Professional that I want to upgrade to Windows 10. Question is can I upgrade 1 machine add my other programs Office etc , take an image and then use that image to upgrade the other machines. Adding a new machine using Win7 image was easy, install the image changes the license number for Win7 & Office reboot and that was it.
i decided to reinstall everything starting with windows 7 then upgrading or using the free upgrade that i initialy used to get windows 10. but it seems that offer is no longer on the start menu bar task bar.
i have the img of windows 10 pro burned from media creation tool to a dvd.
can i use the dvd to simply just upgrade windows 7 to windows 10?
or do i need a serial key for windows 10?
i had some trouble with curse client and some audio stuttering in windows 10 when i used the free upgrade, but it didn't show until after i installed call of duty black ops III where it said i needed audio below 44000khz (sound blaster Z) to be able to open the game....... : and a bunch of bsod out of nowhere. i havent had a bsod on windows 7 for over a year so idk where that came from.
is there a upgrade function from the dvd (windows 10 pro; as in the free upgrade) or do i need a serial specifically for win 10?
I am planning on installing Windows 10, and I'am thinking of doing a clean install. So my question is if I create a system image of my current OS i.e. Win 8.1 will I be able to restore it on Windows 10? Because I do not want to install every software again.
Second device just got win10 logo in taskbar yesterday, but now windows says my hdd has bad sectors and I cannot access it properly. I have a saved Macrium image I made several days ago. Can I put it onto a new SSD and will my existing valid keys still work so that I can get the upgrade?
I've downloaded the ISO image and tried to burn it to DVD only to find that is too large 5.6 GIG and doesn't fit on a 4.7 : is there a way to get it to fit or can I extract it to desktop and run it from there?
I have upgraded directly from a Windows Ten Pro ISO downloaded directly from Microsoft, but both sfc /scannow and Dism "restore heallth" run from an elevated prompt report that they cannot repair the image errors. Windows support simply says to "reset" from Update and Security from the Settings menu, but this machine was running CLEAN Windows 8.1 (sfc /scannow or DISM commands reported no errors) and resetting as they suggest will (at a minimum) mean that all of my installed software will be entirely lost.
I am desperate for a person proficient in restoring the integrity of a Windows Ten Pro image (have tried BOTH reinstalling directly from the downloaded ISO (multiple times and from re-downloaded ISO's and doing in-place upgrades). Both methods report the same errors upon reinstallation or in-place upgrade methods.
The running image is corrupt, corrupt, corrupt. What are the command(s) to restore it to health, as was the case with the previous clean 8.1 that was running before the upgrade???
Both Sfc /scannow and DISM restorehealth report that the image is repairable, but it is beyond my understanding how to do do.
I have an unallocated 1Mb partition as the first partition (according to Easus) on my laptop drive, in addition to the recommended reserved, system and EFI partitions. Could this extraneous partition be the reason for my inability to restore from an image backup? (Restores fail after making my laptop unbootable)...
From my internet reading it would appear that virtualization might be invovled and I've managed to install a virtual machine on the new computer, however, I've now hit a brick wall ..
The vhdx image file is on an external HD together with bu's of my data files (just to be on the safe side)
First of all, I upgraded to windows 10 from windows 7. My device is a ASUS K55vd notebook. When I was running on windows 7 I successfully created a factory image disk via ASUS ai recovery application (a five bootable disk). Then I decided to upgrade my hdd to ssd. My idea is to have a clean factory installation of windows 7 on ssd so I didn't clone my old hdd.
What I did was mount the ssd and ran my recovery disk and successfully installed a fresh windows 7, it is then when I update my windows 7 and went to windows 10. Currently I'm running on windows 10 and there is the notification of creating a factory disk which I would like to do but as soon as I start burning the disk it says that the recovery partition does not exist even though I have my recovery drive ( R: ).
Next, I tried creating system repair disc from Control Panel>System and security>Backup and restore (windows 7) then this prompt came. "The selected disc cannot be used. The selected disc does not contain a valid Windows installation."
Lastly I tried creating system image also from Control Panel too. However it failed and says that the mounted backup volume is inaccessible.
In my reagentc /info:
In my disk management:
I would like to ask for some solution regarding that and I'm wondering if the previous factory image disc that I have from before (win 7) is still usable if I decided to factory reset my pc? And can I make a bootable disc in which it reverts my windows to the point where I freshly upgraded to windows 10 so that I would relieve myself the hassle of upgrading again to windows 10 when the factory image disc work (in which it will surely reverts my windows to win 7).
