I've tried installing a few times, and every time it gets to 75% with 1% in configuring settings. It'll stay like that for hours, so I've forced shutdown and restarted. It reverts to Win8.1, and in Windows Update it says there was an important update that didn't complete, error code: "WindowsUpdate_C1900101 OR WindowsUpdate_dt000". It starts downloading Windows 10 and we go around again.
View 9 Replies
I am upgrading from Win 7 64 bit to Window 10 via the upgrade notification in system tray. It has been sitting on 92 % (configuring settings 69%) for about an hour. Is this normal? Or is it stuck? And if its stuck, what do I do. Can I reverse this upgrade back to Windows 7?
View 7 RepliesConfiguring update for windows 10 is stuck at 55%. This is the second time I am trying to update from w8.1, the first time it ended with a blue screen (power state failure).
I have a hp laptop
4th Gen i5
4gb ram
And more than enough storage available.
After restarting to start the upgrade to Windows 10 (from Windows 8.1), it's been stuck at 38% in the Configuring updates for windows 10 screen for about 3 hours now, and I'm not sure what to do. Is a reboot safe?
View 10 RepliesWhen I got the windows ten upgrade notification this morning the while thing went pretty fast, but now for the past 7 hours, it has been stuck on a black screen with nothing but a white box I. The top left corner saying - Personalized Settings- setting up personalized settings for : Web platform customizations.
View 12 RepliesI'm writing this before having to do a complete wipeout of my system
Specs:
Lenovo Y510p
Hybrid HDD (Seagate) 1TB
m.2 SSD (Trascend) 256GB.
So, since build 9841 I've been using Windows 10 Insider Preview (IP) as my mainly driver. Until the recent redstone builds, Visual Studio has been plagued with problems (From Windows Universal Apps Development to ASP.NET) . I've installed Windows 10 IP in the SSD and have been using it very happily since I've had no major issues, until the ones I've outlined before.
In my Hybrid HDD I had Windows 10 RTM (10586) installed and didn't use it for a quite while (3 months). When these problems rose, I decided to start using that partition again, but out of the blue it decided to start giving me some serious problems: mostly, the whole XAML interface (Start, Volumen, Sound, Battery, etc.) didn't show up. After trying some fixes (From reinstalling Windows Apps to Creating a separate user), I decide to refresh the bits. Unfortunately, even after refreshing my machine didn't fix the XAML interface problems and even worse: I got no possibility to run Universal Apps.
I went and ran some hard disk checkups, from both: the Lenovo Utility and CheckDisk and none threw an error.
The actual problem: Yesterday (Feb. 4) I decide to clean install Windows 10 Build 10586 64-bit in the Hybrid HDD partition (without deleting the OEM reserved spaces) and I'm stuck now on Finalizing the settings. Is there a way to fix it? Tried hitting Shift + F10, but in that specific screen it does not work. In previous screens there are no anomalies.
As last resort I must wipe out everything in both drives and start from zero. I would not like to do that, since Visual Studio is so tough to install (takes too darned long). Is there a way to resort to an alternate method?
Was installing Win 10 last night. Since it was late she went to bed letting it run. This morning it was @ "configuring update for Win 10, 55% complete, do not turn off computer". I hasn't moved off 55%. I'm not sure what to do.
View 1 RepliesWow yet another problem that has hit me since my conversion to windows 10, this morning before i left for work booted up my pc and it got as far "configuring window do not switch off computer" I sat there wathcing it get to 100% and it rebooted itself only to repeat message and all I now get is a boot loop to this message and nothing else.
Getting into the repair window is a task in its own having to switch off pc while windows loading a few times before it get to the repair bit as I have tried all the F4,5,6,7,8 route and nothing and not wanting to have to go into bios everytime to change boot sequence find switcing off pc is best.
Now that windows install all updates and one has no say on the matter looks lik this is going to be a problem becasue if you get a bad update what do you do because updates dont ask you it downloads to pc without your permission but getting back to my problem how to prevent this from happening again because I am tired of having to restore the pc to a previous restore point.
I just ran Windows Update and all seemed well, I rebooted as usual but when I logged in again i just have a black screen with a small white window that says "Personalized Settings (Not Responding)". If I Ctrl+Alt+Delete I can get the Task Manager up and it says Windows Explorer is not responding. So I shut that down and the box goes away. That's all. I can Run New Task and open Explorer but then I just get the box again.
View 1 RepliesI've just clean-installed windows 10 here, then updated everything possible. Now when I try to open the following system settings, nothing happens:
Apps & Features
Storage
Offline maps
Windows is digitally activated and scannow found no errors.
I've seen no one at all with similar problem, except that "settings wont open" issue which has been fixed.
I have repeatedly tried to get my folders on the disk drive to agree with User Accounts setup in Control Panel.I deleted "owner" and created a Test on the disk with the owners name, "CAG".The "test" file has the correct name on it but User Accounts still has "test" while Control panel has "CAG".How can I get them to be the same?
View 1 RepliesIt seems like my Lock Screen wallpaper is stuck on "Windows Spotlight". When I try to change to "Picture" or "Slideshow" in settings nothing happens, and when i choose "Slideshow" and then "Windows Spotlight" the preview turns grey with the loading indicator and nothing more happens.
Would really like to be able to choose my own lock screen wallpaper, though Spotlight is a pretty cool feature.
Is it possible to configure an application so it doesn't appear in the task bar?
View 9 RepliesIs it advisable to set the UEFI BIOS (Asus ROG Hero Maximus VI motherboard) to a factory default settings before installing Windows 10? Or should I at least set the memory "XMP" profile?
View 3 RepliesI have a desktop PC running 8.1 x64. I decided to upgrade using Windows Update to 10. The files are downloaded with no problems, and then it asks for reboot. And when installing the system, the process stuck at 12% (copying files 42%). It just stays there for hours. If I force a reboot, the operation starts to revert to 8.1, and when it finally boots, I see this error: C1900101-2000D.
I haven't found much information about the error, I've tried the installation for a couple of times now, and I'm getting a bit desperate.
I downloaded Windows 10 on July 29th, and decided to upgrade instead of doing a fresh install of Windows 10. However, I realized that many of my old programs from Windows 7 are not compatible, so today I decided to finally do a fresh install of Windows. The reset was stuck at 1% for about 20 minutes, and now it's been stuck at 2% for over an hour.
View 3 RepliesI downloaded Windows 10 on July 29th, and decided to upgrade instead of doing a fresh install of Windows 10. However, I realized that many of my old programs from Windows 7 are not compatible, so today I decided to finally do a fresh install of Windows. The reset was stuck at 1% for about 20 minutes, and now it's been stuck at 2% for over an hour.
View 3 RepliesI think my windows 10 upgrade gets stuck at 92% with configuring windows at 69%. It's been at this screen for over 24 hours already. I'm a bit concerned now.
I'm wondering if I shut it down by pressing and holding the power button, would I get myself into another problem?
Just upgraded. However, I just cannot get Settings to open. On clicking, a window opens and then disappears.
Edge also does not work. Type in a URL and I get "This page is having a problem loading".
I got my free upgrade to Windows 10 and I tried installing it. But it got stuck at 24%, copying new files 83%.
View 2 RepliesI have done the update once, waited around 2/3 hours. i then reset my PC. i then did the update again, waited at least 5 hours. still stuck at 32% if there is a fix for this, i will do anything. i have a brother who did this update. My laptop is a pavilion 15 8gb ram radeon hd 7600g win 8.1
View 1 RepliesI upgraded from Windows 7 to Windows 10 at the first opportunity on July 30 after registering with Microsoft. The upgrade appeared to progress smoothly and I was able to boot the computer to see the new desktop screen. However, very soon after this first boot, the computer asked me to restart to finish the upgrade. This I did and my computer has since been rendered unusable. Every time I boot, the computer gets stuck on the welcome screen. It displays the generic circular user icon, with my name written underneath and the word "Welcome" written underneath this. The animated "computer working" icon (the little dots which rotate again and again) is displayed next to this. However, it never goes away. I left the computer for 12 hours and nothing changed (the little dots kept on rotating all the while). The computer otherwise appears fine (ie. the multimedia buttons at the top of the keyboard work fine) but the OS cannot get past this screen, no matter what I do.
I have unplugged all USB devices. I have tried booting with the power cable in and out. I have gone into the Advanced tab of the setup menu and disabled (and re-enabled) things like Bluetooth and Wi-Fi top test if this makes a difference. Nothing does. As things currently stand, I am completely unable to use my computer and all my files are stranded. Several of them are desperately needed.
I have tried pressing F8 to boot the computer in safe mode, but this doesn't seem to work (it results in a back lit but otherwise black screen).
I had reserved a copy of windows 10 and i was able to download it through windows update. once it is downloaded i was asked to restart for updating. copying files stuck at 0% for 5 min and windows 7 ultimate x64 rolls back.
I can even see an error message in windows update page shows Windows 10 Pro installation failed error 80070006
I recently upgraded my Windows 7 PC to Windows 10 using Windows Update. The whole process was smooth. I never really ran into any problem. Because the PC is so relatively old, I decided to delete all files and reinstall windows 10 using the windows 10 feature 'Reset This PC' to start fresh and theoretically faster. During the reset when Windows is installing my drivers, I noticed that the screen is plain black - no mouse pointer and the amount of reset finished(in percentage) is not also shown. The screen is just plain black. I am pretty sure that both the monitor and CPU is on. I've tried waiting for atleast an hour. I turned my pc's monitor on and off - nothing happened. So I have to resort to hard reset/reboot coz I cannot really see anything on my screen.
When I turned the power of the CPU back, it gave me the error 'The computer restarted unexpectedly or encountered an unexpected error. To install Windows, click ok to restart the computer and restart the installation'. I pressed OK but after restarting, it gave me the same error over and over again. I tried the solution in this website ( during installation of windows | HERESJAKEN), and it got rid of the error. However, I am stuck yet again in a loop that continues to just restart my PC when they reach the screen that tells you how much of the reset is finished, in my case, im stuck at 64% of the reset. That screen is shown for like merely 2 seconds, then the PC will just restart again, then show the "Reset progress screen" again for 2 seconds then PC will just restart again, over and over. I think the only solution is to start the reset of the PC again, but I dont know how.
So I upgraded my Pc from Windows 7 to Windows 10 then i wanted to make a recovery because my Pc was full of Crap... It was loading and it went to about 30 % then it jumped back to 2 % and now it isnt loading any further.
View 1 RepliesDownloaded the iso and all seemed good , the compatible report said all was good . But now on the upgrade it has been stuck at 34 % for around 1 hr . I do have the circle with the little circles spinning ?
View 1 Replies
