I am planning on installing Windows 10, and I'am thinking of doing a clean install. So my question is if I create a system image of my current OS i.e. Win 8.1 will I be able to restore it on Windows 10? Because I do not want to install every software again.
View 2 RepliesI have created a disk image of the system disk, C: with the disk image software in Win 10 backup. The system disk was 70GB with 40GB of files. When I tried to write the image to the SSD the Win 10 install software said the disk (120GB= 110GB) was too small. I reinstalled the windows disk booted and shrank the system disk to just under 60 GB and retried the process with the same result. System is Win 10 32 bit on an old Acer netbook.I would like to be able to transfer the installed files to the SSD.I have looked at the tutorials for creating a system image and also how to create hardware independent image for installing win 10
View 9 RepliesWindows 10 Home.
I created system image backup file at least once a week. I did one yesterday, and today I needed to run it to restore my system. To my horror, I cannot find way to run it. I ran system image backup restore multiple times. I know how to do it...... until today. Today, by the time I clicked Troubleshoot option, there is no Advanced Options to choose from. Instead it sent me to Startup Settings option where I could go to safe mode etc,
I ended up running a system restore. Good thing I do create restore point religiously. But, after system restore, I still have the same problem.......... cannot restore image by using system image backup.
adding............... I went to my other laptop running Win 10 Pro, I had no trouble running system image restore.
I am loving Windows 10 and I want to remove Windows XP from my dual-boot configuration (and remove the whole dual-boot thing completely) but it also acts as the system partition, so I guess it's not as straight-forward as I had hoped. Is there a way to make my Windows 10 partition the system partition?
View 1 RepliesI have the following entries in my system start up:
Windows 10
Windows 10
Windows 7
How do I remove the last two entries so startup just shows one Windows 10 only or just boots right into Windows 10 without a start screen ?
Yesterday I decided to download WIN 10 Pro 64 bit with the media creation tool to generate an ISO file as I needed to do a fresh install on several machines. I had assumed that I would get the current 1511 version but I got the previous 10240 version . Now I know that MS pulled this November update after a dew days of release but then re-instated again on the 24th Nov. My broadband speed is "pathetic" so I had to download the 1511 upgrade once the initial installation was finished. This meant 18 hours had to elapse and I will still have to download the TH2 upgrade on every machine--will stick with Win 7 !
why I got the old version of Win 10 ?
Whenever I try to create a system image or run recimg I get error 12289 and the backup fails. System protection is turned on and maximum space used is set to 20%. I have no third party backup software installed and this is a real not virtual machine.
PHP Code:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="VSS" />
<EventID Qualifiers="0">12289</EventID>
<Level>2</Level>
<Task>0</Task>
[code]...
Stop and start VSS servicesDelete old snapshots using vssadmin delete shadows /for=c: /all (there aren't any)Re-register VSS DLLsRe-install 9926.
I successfully created the image to an external drive, apparently. It took some time and the moving activity bar moved to completion.Opening the drive there is no sign of the image altho there is one I created last year. Also altho it said that so much of the drive would be used the resulting free space seems the same as before the creation.It is not in my C drive so what has happened?
View 3 RepliesHow can I check that my system image will work in the case of a crash, Windows 10.
View 3 RepliesI had updated windows 7 home premium to windows 10 then when the update was complete I created a backup image of the whole system.... and saved in an external HD. then my fixed disk died, replaced by a new fixed HD I can not recover the backed up windows ten image from my external HD ... is that due that when replaced the new HD I am contrived to recover the system with windows 7 home premium and windows 7 do not recognize the backed image of windows 10?
View 1 RepliesI created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
I am trying to restore a Windows 10 system image with no luck. Here is what led up to this situation:
1. Upgraded from Windows 8.1 to Windows 10 when it became available the end of July.
2. Made a System Image (ssd m.2 mounted on the motherboard) after I was to a point where everything seemed to be working fine on 8/12/15 and saved the image to a separate hard drive on my system (E: drive).
3. Updated the bios from 2012 to 2501 yesterday and I was no longer able to boot from the ssd drive. Windows would start to load and then give me an error that no operating system was available. Tried everything I could to get Windows 10 to boot from the ssd drive with no luck (after the initial boot manager reached the point where the operating system should begin to load, all drive activity stopped)
4. Performed a System Restore saving all personal data because I could not see the system image I had created or access the original ssd partition the had original Windows 10 on it in a command prompt from within Windows RE (the drive did not exist).
5. Windows 10 now loads less all the programs I had installed.
6. When I attempt to restore the system image from advanced options in Windows 10 RE, it gets to the point of showing me available images for which there are none showing. I copied the image from the original hard drive to a USB hard drive and to a network location. Windows does not recognize the image in any of the locations.
I read in a thread somewhere that in Windows 10, the only way to restore a system with a windows system image was with the actual OS that created it. Since I did the Restore from the original system image from the recovery partition and not the one I had made the image with I am assuming that is why Windows is not showing any image to restore.
I have a custom built system:
Asus P97 Pro mobo
Intel i7-4790 3.6GHz
32 GB RAM
64 bit Windows 10
SSD - Crucial CT500MX200SSD4
Hard Drives x2 - Toshiba DT01ACA300
How to get Windows 10 to recognize the image. I am going to give it about another hour of research and then do a clean install.
Windows 10 build 10586 x64. When I try to create a System Image I find that Windows 8.1 and Windows 10 are both selected. How Do I just create a system Image for Windows 10
View 1 RepliesHow do I set up an external HDD to be used for system image backups? For example, specify how many images to keep, schedule the backup, etc. also, can I use the drive for anything else other than image copies?
View 9 RepliesI did a clean install of windows 10 and now i am trying to do a system image and save it to usb but windows keeps saying this is not a valid location, my usb is a sandisk 64 gb formatted to the correct format that windows asks me to do. I have tried to do create a image on two usb flash drives but i keep getting the same error from windows that this is not a valid location .
View 5 RepliesI have just created a system image to disc, and I would like to know how I go about verifying that the disc is working. When I say disk it took 5 hrs and 19 disc's to finish.
View 3 RepliesI recently purchased a Lenovo 900 ultrabook, and proceeded to upgrade from Windows 10 Home to Windows 10 Pro (using a Windows 7 Ultimate product key). Now that I have done this the factory "restore" does not include my upgrade and I am concerned that I would lose it if I ever needed to restore.
So, I am trying to do a full system image backup to a flash drive, but Windows 10 says that the drive is not allowed for this. I can create the USB drive as a network share and get the backup to work using that method, but I don't really trust that it will work properly.
How to do a full system image backup to a USB drive in Windows 10 that you trust will work in the case a restore is needed?
I've not partitioned a hard drive on Windows 8/8.1. In fact, I've never partitioned a hard drive on Windows 7. The last time I partitioned a hard drive was Windows XP to dual-boot two operating systems. I'd like to partition the hard drive on my laptop in order to save a backup of my system onto it, as I don't have an external drive right now. Any detailed, step by step process to partition my hard drive and then back up my system onto it? I have 350GB of free space.
View 4 RepliesBefore I upgrade to Windows 10 on my Windows 7 desktop I'd like to know whether or not there is a built in create a backup system image?
Once my Windows 10 upgrade is running properly and before adding in any new programs I wish to create a backup system image
--- I know I can use a 3rd party program and I am use to Macrium Reflect on my Windows 7 but I wish to know whether or not there is a built in create a backup system image utility
So far I have found which I will do while my Windows upgrade is in pristine condition
Recovery Drive - Create in Windows 10 [URL]
Windows 10 ISO Download [URL]
If I was to make a complete image of my system warts and all. What would be the best way to create it?The media creation tool kit or something else?
View 7 Replieserror message when I tried to create a System Image using the built-in backup utility tool in Win 10?
View 9 RepliesI made a thread here some time ago in trying to create a System Image (Sys Img) using a 3.0USB 1 TB Toshiba External HDD. My issue is it runs then stops with errors and creates blank folders in the ExtHDD.
View 9 RepliesI have tried to run a system image backup on my Win10 VM and it fails with an odd message.
the location must not be "compressed or encrypted or sparse".
Now I understand what compressed and encrypted mean and the location is not those, but sparse?
Details
Host: Win7 64bit SP1
Guest: Win10 64 bit build 10565
Location: Netgear ReadyNAS
Whenever I try to create a system image or run recimg I get error 12289 and the backup fails. System protection is turned on and maximum space used is set to 20%. I have no third party backup software installed and this is a real not virtual machine.
PHP Code:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="VSS" />
<EventID Qualifiers="0">12289</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
[Code] ....
The provider looks OK but various writers are timing out.
PHP Code:
C:Windowssystem32>vssadmin list providers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
[Code] ....
What I've tried:
Fixed CAPI2 error using this command (updated for windows 10 based on Event 513 errors when setting a restore point or running backup - Microsoft Community )
PHP Code:
sc sdset MSLLDP D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)(A;;CCLCSWLOCRRC;;;SU)
Stop and start VSS servicesDelete old snapshots using vssadmin delete shadows /for=c: /all (there aren't any)Re-register VSS DLLsRe-install 9926
I just re-installed Windows 10. I'd prefer NOT to do that any more than necessary, which includes after a Windows upgrade causes a problem.
SO, I'm trying to set up Windows 10 to make a system image (periodically). It WORKS fine, but instead of just taking the system disk, it's ALSO backing up one of my other disks. I BELIEVE it's because the other disk has a page file on it.
I'm putting the main pagefile on the NON-SYSTEM disk because my system is on an SSD and it's recommended (from what I've read) to minimize keeping things on there that get beat on regularly... BUT, as I understand it, any disk that has a pagefile on it is going to be included in the system image. This is a problem 'cause the non-system disk it's backing up has a couple TERABYTES of images on it along with the pagefile.
SO, can I tell Windows 10 Image backup NOT to mess with the other disk?
OR, do I put a little partition on the other disk just to hold the pagefile?
OR, do I just say, "screw it" and put the whole pagefile on the system SSD?
OR, do I find a 3rd party tool to make a system image?
I've just built my new PC and am ready to create a system image. However the drive I want to create a system image of is 21gb and I don't have a USB that large. However I do have a hard drive, although that has things on it already so, my question is:Can I put my system image onto a drive that already has things on it or do I need to partition?
View 1 Replies