Installation :: TP Latest Build Install On Empty Machine
Jul 4, 2015
Right, so I've got a laptop that I'm currently trying to install windows 10 tp onto. It's the exact same model as the one I'm running on (it's my brothers, and I'm trying to fix it for him), but I've hit a snag.
The insider program website says that you can burn the .iso to a dvd and install it like that, but I've done that, and the laptop just stalls at a windows logo screen.
There's no operating system currently installed -- all 900 someodd GB are free and, using a windows 8 install disk to access a command prompt, DISKPART says the partition is healthy. I've cleaned and formatted it several times now to no avail.
View 9 Replies
Similar Messages:
Dec 10, 2015
I just had to re-install W10 using the latest build offered by the Microsoft Setup Tool because W10 on one machine became corrupted somewhere along the multiple update path! No problems, except it seems that a few of the default settings are a little different than they were in previous downloads. Most are for the better. But...I can't seem to figure out how to turn off the display of all the disk drives in the Navigation Pane of File Explorer. I have five other systems that have migrated successfully along the update path and they don't look like the screen shot attached. What or where is the setting to turn off the display of the disk drives when the "This PC" is collapsed.
View 9 Replies
Jan 6, 2016
I upgraded to Win10 last month, use Firefox browser and gmail. Often when typing something, the computer will erase the last several letters, usually no more than 7 letters.....nothing obscene that may be recognized and erased. How to keep from erasing?
View 7 Replies
Aug 15, 2015
I have a few laptops, all of them are the same specs except for a few with a different GPU. All of them run the exact same software. I'm planning to upgrade them all manually to 10 first to register the machine, then create an image so in case a drive goes belly up, I'll just restore it from the image created instead of installing all the software one by one. I'm going to take one machine, sysprep it then keep a copy of that image for restoring on to the other machines.In this case would it just reactivate properly on the newly cloned machine?
View 5 Replies
Sep 10, 2015
Date: 10th September 2015. Machine working fine under windows 10 for over a month. Checked to see what Microsoft updates after doing a Microsoft Defender full scan and everything ok. It seemed from settings->check for updates that there were a number of updates that required the machine to download and restart. Decided to update immediately and did the same on a dell laptop and Linx 10 tablet all running windows 10. All machines did update and restarted fine, except my main laptop - Toshiba Satellite S55t-A5334 did not recover after the update and is now continuously in "Restarting" loop. Tried powering up and down and trying to force it to reset into some sort of safe mode. how I can get it into state that will allow me to go back to the last known working state as I'm fairly sure this is an update that is not compatible with the hardware.
View 2 Replies
Jul 5, 2015
Upgrade install from the same build is that possible? I want to try an experiment.
View 8 Replies
Dec 4, 2015
There is a wds latest preview build , can I delete it ..? I only have 256GB SSD , so I try to save as much storage as I can ..
View 4 Replies
Jan 25, 2016
Somewhat unusual situation here. A machine running the latest build (11102) got badly infected by malware. It was such a major attack that I was about to reload the earlier day's image from my Windows Home Server. But it seemed even easier to revert to the previous build, not yet removed from the Windows.old folder. This I did, and everything soon was running fine as expected.
The issue is that the Updates check is not offering Build 11102 again. This isn't a showstopper; I'm sure there will be another newer build soon. But it would be nice to be back up on this latest build, just as all my other Win10 machines are running.
View 6 Replies
Nov 20, 2015
Just yesterday windows 10 mobile insider fast ring has linked mailboxes, updated last night 11/19/15 and now option is no more?
View 2 Replies
Aug 29, 2015
I'm on build 10525, I am enrolled for Fast insider builds yet build 10532 isn't showing.
I've already tried the steps at [URL] ....
View 2 Replies
May 30, 2015
I am just about to clean install from build 10074. I assume that it will update to the latest build once installed. I was wondering if I need to install drivers and wot not before upgrading via WU or do that after the upgrade to 10130 is compete.
View 6 Replies
Jul 10, 2015
Ever since upgrading to the latest build, I have been unable to bridge/ unbridge my connection, nor get into Properties for any selected network adapters. What happens is if right-click on the adapter the task bar goes blank for a brief bit, refreshes, then the control panel/ network and sharing window closes.
View 4 Replies
Feb 10, 2016
I updated a W10 OS and I'm seeing something i've never seen before. The Notification Area shows left and right arrows to scroll, and a large blank area in the right corner. This is a W10 Insider Preview fast ring OS, updated to the latest offered. It's a bare metal install, not a VM, version info is in the screen print.
Has seen these arrows with the latest Fast Ring OS ? I like to see all icons in the Notification Area, all the time. I've checked my settings, and i think they are right for me, and have always worked before this "fast ring version update".
Screen print 1 shows what i see with the latest W10 Fast Ring version.
Screen print 2 shows what i see with the latest W10 RTM version,
This is what i like and has always worked for me in W7, W8.x, and W10 - until my latest fast ring update.
View 8 Replies
Dec 18, 2015
Latest (preview) build - file explorer not showing progress when copying / moving files.
This - unless fixed soon will cause me to revert to previous build. Is it just something with my update. (W10 Pro X-64).
View 1 Replies
Sep 19, 2015
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
View 4 Replies
Jun 16, 2015
I've been trying to update to the latest build for some time now, I'm currently on 9926. The update downloads fine and it also goes through the process of installation fine, up until it's time to restart the computer for the final step, that's where the problem begins. It gets stuck on a boot up loop, it loads to the windows logo and says preparing automatic repair and restarts the computer again and again with the "preparing automatic repair" message. I made an installation disc for 9926 so that's how I'm able to reset the computer but I've also made one for the latest build but I still get the same boot up loop problem. I really want to be on the latest build and I'm worried that I won't even be able to install the official release.
View 1 Replies
Jul 29, 2015
If I want to install Win10 on a SSD do I have to first do a free upgrade install on the HDD of the same machine, then do the installation from DVD/USB to SSD? I am trying to upgrade the hardware to put the new OS on a SSD.
View 1 Replies
Dec 14, 2015
I have a new HP Envy 17t with Windows 10 64 bit. I have been installing various bits of software that I need to have. However, with some applications I get a strange error pop up, first a window telling me that the application is from an unknown source then, when I click OK, to continue, another window pops up, this one:
This has happened twice in the last 24 hours. Once when I tried to install a windows application so that I can root my Lenovo android tablet and then again when I wanted to install a media converter app.
I have the latest versions of both applications, I made sure they both were made for Windows 10 64 bit, but Windows 10 won't install them.
View 9 Replies
Aug 20, 2015
I have a Similar problem in which I cannot install the latest windows 10 update I get to 75 percent and then it says it can’t continue and resets.
My computer is a Windows 7 machine upgraded to Windows 10.
I have ran sacs scan and it found corrupt files. Done all the other scans that you have suggested and I did get that source/image is repairable.
Tried all the Command prompts DIM/Online and that would not work either.
Using Microsoft media creation I re download windows 10 Is Mounted it do a dad and pointed the DIM online source to F: it also says that source fills could not be found.
I have even tried to reset Windows 10 but that encounters problems as well
I have even tried to reset windows through ISO and that encounters problems as well.
View 1 Replies
Aug 4, 2015
if i try to install the latest windows 10 driver it says it fails, then if i try to uninstall my current ones it says it fails as well. what am i supposed to do, my other display wont get recognized and my main display is not running at 1080p.
View 1 Replies
Jan 12, 2016
I need to replace my failed system disk with a new one and wonder how I can go about installing a new win 10 bought and downloaded from Microsoft. I imagine the process would be the same as for a new custom built computer. I miss being able to buy a Windows on a DVD.
View 9 Replies
Oct 13, 2015
I have lots of links after my Windows 10 installation that appear to go nowhere (i.e. Properties shows the the target to be blank). For example File Explorer shows a link "This PC > Pictures > Local Settings" with an empty target field. May these be deleted?
View 2 Replies
Jun 13, 2015
Despite all of the updates that are released my laptop doesn't seem to be installing them. I have restarted and turned my laptop on and off multiple times but to no avail. It is just showing this.
View 3 Replies
Dec 28, 2015
I've tried installing the language packs using windows updates, or directly downloading and installing using lpsetup.exe... It always starts the installation, then it fails at the end.
View 2 Replies
May 23, 2015
I am currently using an asus laptop and running windows 10 build 10074. I keep trying to upgrade to the new 10122 build but every time I get to the installing windows circle. It gets stuck at 19% overall and 64% copying files. I have tried the solution for the surface pro 3 that gets stuck at 18%. I have also contact Microsoft 5 times and they couldn't fix it.
View 3 Replies
Nov 14, 2015
I have a Dell XPS 9100 machine that is triple boot, Win 7 SP1 Drive on C (this is the OEM OS), and Win 8 (not 8.1) on Drive I, and Win XP SP3 on Drive D.
I would like to do a upgrade of the Win 7 SP1 Ultimate drive C to win 10 pro th2-10586. How I might do this and keep my triple boot intact?
I have been an insider since the program started and have run win 10 pro on several VM's on my win 8 OS. I also have Two Retail win 10 pro USB drives (10240) that I'm sitting on.
Would it be better to upgrade the OEM OS or do the upgrade from one of the retail USB drives and then let it update to th2-10586?
View 3 Replies