I encountered this issue recently, and it's caused me a fair bit of frustration. I keep searching for solutions but it seems nobody has any. What I can do to restore Windows 7 (preferably with my files intact) or at the very least finish the upgrade to Windows 10?
View 2 Replies
I elected to postpone the Win 10 upgrade for two days to allow me to save an image before installing the new OS. However, when the process requested a restart, I naively went ahead and to my horror, the Win 10 install was underway
As all too often in these situations, the install on my Dell Laptop (Win 7, Home Premium), stalled at 44%.
Hitting the reboot key had the install attempt to reinstate the original OS. This failed.
I'm presently in the situation where a reboot asks for the Win 10 installation disk, to enable a reinstall (I presume). Obviously I do not have an installation disk.
Not to be deterred, I attempted to reinstall a relatively recent Win 7 image using my Dell software recovery disks. Things seemed to proceed in an orderly fashion until at a point I received a blue screen of death a consequence of the disk software saving my computer from terminal damage (as if I wasn't terminally damaged anyway) .
Now, as we all know, at any given time there is incremental data on our disk that will be lost in any format, even in the event of a successful past image recovery.
I guess the question is this: If I were able to access a Win 10 installation disk, and use it, what is the likelihood of this screwed installation recovering itself in such fashion that I end up with a Win 10 OS and my data intact?
my laptop nameCresia
ASUSTeK COMPUTER INC. X551MA
Serial #: E5N0CX006715187
Windows 10 Core (10.0.10240.16590) my computer crashed brings up Recovery file: BCD Error code: Oxc0000034 then goes to Aptio setup utility screen. i signed in as administrator and added passwords now i just need to know what i need to do from here.
Windows kept asking me for the password upon startup and would not recognize the password I input each time. So I would have to reset it. I went to the forum and read how to shut the password feature off by holding the windows key + r , typing the letters provided and unchecking the box. The system then asked me to restart. My laptop will not restart - blue/black screen appears and nothing else.
View 4 RepliesMy laptop suddenly crashed and now it says "Boot media missing" when I restarted. After that, it always takes me to "Preparing Automatic Repair" and then the 'Troubleshoot' menu.
In the 'Troubleshoot' menu, it has two options: 'Reset this PC' and 'Advanced options'.
When I choose "Reset this PC", it asks me whether to keep my files or remove everything. I've tried both and it displays an error. When I choose to keep my files, it says that drive is locked and tells me to unlock the drive and try again. When I choose to remove everything, it says that there is a problem resetting the PC.
And then I've moved to "Advanced options". The options are: System Restore, System Image Recovery, Startup Repair, Command Prompt, UEFI Firmware Settings, and Go back to previous build. I've tried all of these and it all returned an error. When I chose UEFI Settings, it restarted to BIOS/UEFI setting. And my BIOS/UEFI can't detect my hard drive. DISKPART from Command Prompt can't detect it either.
My project is due in 3 days and I've got all my files in there. Is there a way to fix this? Or to recover my files?
My laptop suddenly crashed and now it says "Boot media missing" when I restarted. After that, it always takes me to "Preparing Automatic Repair" and then the 'Troubleshoot' menu.
In the 'Troubleshoot' menu, it has two options: 'Reset this PC' and 'Advanced options'.
When I choose "Reset this PC", it asks me whether to keep my files or remove everything. I've tried both and it displays an error. When I choose to keep my files, it says that drive is locked and tells me to unlock the drive and try again. When I choose to remove everything, it says that there is a problem resetting the PC.
And then I've moved to "Advanced options". The options are: System Restore, System Image Recovery, Startup Repair, Command Prompt, UEFI Firmware Settings, and Go back to previous build. I've tried all of these and it all returned an error. When I chose UEFI Settings, it restarted to BIOS setting. And my BIOS can't detect my hard drive. DISKPART from Command Prompt can't detect it either.
I have a Intel Nuc, which I set up myself with windows 8.1 this was upgraded to windows 10.I tried to reset windows 10 tonight as im selling the computer, it got stuck at 66%, reported an error about not being able to complete, after a number of attempts and the same result i chose the option to restart pc.
Upon restart i now get nothing at all, no bios screen, no windows screen, not recognising prompts from keyboard. Tried external dvd player with original windows disc in, usb powers it but nothing. Just a black screen of nothing!!!! Monitor recognises hdmi cable is connected, its like the pc wont display anything.
i can't use my mousepad on my asus laptop after upgrade win8 to win10.
Eventhough i can use the touchscreen but i also need the mousepad to work.
After upgrading to windows 10 my laptop is started heating up and slowed down. I noticed in task manager there is an application named 'IAStoreDataSvc (32 bit)', its using about 30% CPU.
And when I end this app, my laptop behaves normal (no heatup, no slow down). What is this application is for?
I have a dell insperation and after having upgraded to windows 10, I came across a few issues. The update when well and windows 10 is working on my laptop, however, I have an issue where I am presented with a black screen when i start my computer. I do see a dell screen and a windows boot screen before it goes black so i know the issue is not a hardware issue, however after the windows boot screen passes (the one with the blueish window icon) the screen goes to black, but it is still on (meaning the monitor is still turned on just not displaying anything). The reason i know that windows installed fine is that external monitors do work, just not my laptop monitor. I have already reinstalled windows 10 and have made sure all my drivers are up to date. Windows 10 is just not recognizing my laptops screen as a usable monitor.
View 9 RepliesI recently upgraded my laptop from Windows 7 to Windows 10 64 bit and shortly after it was completed, everything was working fine until the screen suddenly went black. The computer was still running but I could not see anything on the screen to restart the computer so I closed the laptop so that it would shut off to sleep. Coincidentally a power outage happend lasting for about an hr after. When I am finally able to boot up the computer, it show the ASUS splash screen and the windows logo with the loading spin cycle but then shows a black screen after. My guess is that the OS may have been corrupted or something so that I plan on backing up my hard drive before going to a tech shop. I'm not sure what the issue is but it seems like I may have to reinstall the operating system. i have an ASUS N61J. I can't boot into bios or safe mode and can't get passed the black screen to log into my user account.
View 1 RepliesThere is no sound output in my sony vaio laptop after upgrading to windows 10.
View 7 RepliesI recently started trying out Windows 10. It's buggy and frustrating, but it's still in preview mode, so... That's expected.
Nothing was working when I installed build 10074 off disc, so I installed build 9926 off a disc (I got the iso from MSDNAA, I'm a programming student) then upgraded via settings to 10074.
During the upgrade, my laptop started resetting, normal. But halfway through, the resets stopped working.
The screen switches off, the cd drive switches off and the hdd activity light switches off, but the power stays on, and the fan keeps running. It also doesn't switch off on shutdown either.
I finally have a working version of Windows 10, minus Cortana and Spartan (I'm in Aus), but now my laptop won't shut down.
Could it be drivers? Is it OS interference? Is there a way to fix it without uninstalling and re installing Win 10? I really cbf going through all that again....
Lost audio on HP DV6700 laptop since upgrading to Windows 10. Ihave removed sound device from device manager and reinstalled, have replaced driver with previously saved W7 driver....still nothing, not even the windows system sounds, critical battery etc.... All seems eps ok except this.....saw a post that says the sound is integrated with the graphic card, but the graphic card now has a windows 10 driver from nvidea.....maybe should downgrade GPU with W7 driver...
Just tried the idea of setting frequency to 16bit 9600 but I received no sound output error box....then went to enhancements settings where it has bass etc etc settings, was disabled so enabled it without choosing any option..then went back to frequency and changed it to default, which is 24 bit 19200....then was told not supported by this device but then miraculously it worked....now have all sound restored windows music everything...not sure if still have windows 7 driver...it is MS 2008... really scared to update the driver as it is all now working....not sure how I fixed it though, was it one particular action ? or a combination...?
after upgrading to the windows 10 OS, I could not get my HDMI port to work. It does not get recognized at all and is very frustrating. I run the OS on my laptop which is a HP Pavilion. I really need it to be working. I love windows 10 but this is a big problem.
View 1 RepliesI had recently clean installed Windows 10 on my laptop. Before doing that, all my drivers were working well except for WiFi - a problem since build 10158. Currently I am on build 10240.
When I plug usb sticks into the USB 3.0 ports on my laptop, they don't connect. It's not like the 'not recognised' problem. It simply shows no sign of connection like blinking its LED or any response from the OS. On the other hand, when I connect my Lumia phone in the same ports, it warns me of Slow Charging.
And when I plug it into the 2.0 port, it gets connected. Why is this happening? All of my device drivers are up to date. I believe its not a hardware issue because my laptop has two such ports and both of them have the same problem.
I have windows 8.1 installed on my laptop and when I try to upgrade to windows 10, it overheats, shuts down and when I restart it, goes back to windows 8.1.
My fans are clean and everything works just fine with the laptop, I don't understand why is this happening. I also have a friend with a similar laptop model who is having the same overheating problem when upgrading to windows 10 (in his case, from windows 7).
Black screen and stuck cursor after upgrading to windows 10 on my acer laptop, I've tried all other forums and nothing has worked ...
View 1 RepliesI am trying to upgrade from win 7 sp1 pro. 64 bit in parallels but it keeps failing it is setup with 2 gig of RAM it is the latest parallels 11 .
l have checked for updates to win 7 but it keeps on checking forever not sure if this the problem but if it is not sure how to solve it . I have tried the standalone updater it is doing the same.
Ok, I know when doing a clean install or 1st time installation to disconnect the 2nd internal drive.
I have been testing Win10 on my laptop that only has one drive, but my desktop has an SSD OS drive and a 2TB spinner for the Libraries , File History and Macrium Reflect images. I have only started using 2 drives(before this I had never done it) at the end of last year and never had to upgrade or reinstall Win 8.1 update.
Question: When I run the upgrade to Win10, through Windows Update(whenever it comes down to me), Do I/Should I disconnect the 2nd internal(and redirect everything after), or can I just leave it connected, with no ill effects?
I think my windows 10 upgrade gets stuck at 92% with configuring windows at 69%. It's been at this screen for over 24 hours already. I'm a bit concerned now.
I'm wondering if I shut it down by pressing and holding the power button, would I get myself into another problem?
Windows 10 notification indicted that CPU ID and CPU Z were removed during the upgrade. However when I click on their short cut icons on my desktop , both of the programs seem to work . I can't find the programs in Windows explorer . They are also not listed in any of the uninstallers. So I am puzzled whether the programs are actually still in the system and working . I have not looked into the registry yet. Are these programs supported by windows 10 ?
View 9 RepliesI wanna upgrade my Windows 7 PC directly using the Media Creation Tool, keeping the personal files only. Is it possible to specify which folders to keep?
At minimum, I would like to remove the 'AppData' folder to remove old cache and program files, but I'm still not sure if this is a good idea. The only folder I want to keep intact is my very large 'Dropbox' folder.
I considered choosing the "Nothing" option, except I don't want to re-download my entire Dropbox and put unnecessary stress on this 7yr old hard drive.
It happens everytime I try to upgrade windows 10, I have tried loads of different methods but none seem to work.
The C:$Windows.~BTSourcesPanthersetuperr.log is as follows:
Code:
2015-08-02 21:50:42, Error
CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-08-02 21:50:42, Error
CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
[Code] ....
Its been more than a month that i have updated my Pc to windows 10, and i actually dont like it at all so i need to find a way to go back to windows 8.1 without losing data like Steam games and pictures and more.
View 8 RepliesI haven't tried it myself (as I upgraded THEN did a clean install before this article appeared) but assuming it works this can be a big time saver.
View 4 Replies
