Installation :: Unable To Clean Install - Only Upgrade
Jan 31, 2016
I have a feeling this is bios/uefi related
Got a sabertooth z77 with two ssd on raid 0 (intel) another hard drive for backups (Regular sata) and another storage card (pciexpress sas highpoint 2720, with raid 5)
Windows 10 doesnt seem to like this.
Even booting the dvd itself its a drag and hr wont recognize the raid 0 not even with drivers (driver load will cause a watchdog blue screen)
Windows 7 and 8 dont mind. At all.
I feel like the csm thingy might have something to do.
Bios is latest. Sas raid is for storage only. Ill search for the manual of the board as the printed one doesnt have the options i got on the screen
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
I upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
I got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
There is a lot of questioning about making a clean install of windows 10 once you upgraded from Windows 8.1 retail version.
So there it is :
-If you have NEW hardware : So if you want to make a clean install of win 10 on you're new computer (actually it all depend on you're motherboard). You will need to re install windows 8.1 with you're licence that came with (Of course install it on you're new comp). Then you have to make the free upgrade again. In other words you have to restart from 0. And yes you're license is still good for windows 8.1. After the free upgrade win to 10, it will save you're new motherboard with you're microsoft account to the microsoft activation server. Well, its good as long as the upgrades are free (One year from the launch)!
--So for later re install, as long as you don't change you're MotherBoard,you can start from the Win 10 installer and you will not need to enter any license key. You just skip these steps and when you get on the internet and log on to you're microsoft account it will auto detect you're account with you're mobo and activate automatically. In other words, there is no key from free upgraded windows 10
-If you don't have new hardware : Well its very simple, you mobo is already saved with you're microsoft account so you can just install you're win10 from the installer. You do not enter any license keys and it should activate by itself when you connect to internet.
I think its always good to have a retail version for the actual system that we use with a good license key.
I did the upgrade on my Laptop from 8.1 to 10, went smoothly everything works so far. Now i have to decide do a reset and do a clean install since i always worry if later there will e a problem, should i safely think if no problems now that if i reformat a clean install that all drivers will be there and everything will be ok. Tomorrow i do my Alienware Aurora R4 desktop and prey it goes well. Then since i have 30 Hard Drives that i will be able to do a network share and be able to see it on my living room TV, will pray.
So I've been using Windows 10 for the past two weeks now. I really dig it, however the hard drive I'm on is slightly slower than my 7200rpm drive which could boot Windows 7 up a lot faster.
I upgraded my Windows 7 installation to this current Windows 10 install and since I want to
1. Sell this current hard drive
and
2. Move to the other hard drive,
I'm in a bit of a dilemma here. I have a large amount of software and important documents installed on this pc.
In the event where I want to clean install to the other hard drive, I don't really want to be tasked with having to reinstall all of this software again, mostly because I don't have installers available for them.
So I guess I want to know what are the benefits to clean installing over upgrading on an already fast hard drive and what would be most convenient in my case if this option is more viable?
I've read differing opinions online over upgrade vs clean install and I want to know what I should do.
Upgraded grand-daughter's pc from 7 to 10. Seemed a bit sluggish running from a spinning HDD so I decided to do a clean install to a SSD using the same USB I had made to upgrade with. Installed just fine but now says the keys don't match and I have to buy a key? Thought the upgrade was tied to your hardware (motherboard/CPU) and a clean install after would be activated?
Just wondering looking at my partitions after upgrading to windows 10 . Do I need to keep the last too partitions? I love windows 10 and had presumed that after a clean install my old windows 8 and 8.1 would be removed are these last too files remainders from them and if so can i delete and how should i do so. Just took a snip of the partitions content!
I upgraded my Asus X205TA to Windows 10. However I wanted get a clean install so I went into recovery and chose to reset the PC and clean all apps,files, etc.
Whenever I try this it fails then gives me a blue screen with options. Only booting back to Win10 only works.
Is there a way I can get my win10 key and install from a win 10 download?
I did go back to Windows Download tool and had it create a USB stick. Can I use this to do a clean install?
I don't want to move on unless I know I can get Win 10 installed on this again. I know once I erase everythign my there is no option to go back to Win 8.1.
Just a curiosity of mine - Is there a difference between a clean install and performing an upgrade while keeping only the files? In other words, is this sort of upgrade the same as a clean install, only with the files restored to 'documents', desktop, etc.? Or, does the new windows folder contain remnants of the previous install.
I've done the upgrade on my 2 computers and then later I did a clean install on the laptop. What I'd like is to do a clean install on my desktop PC but I sure would love to bring back the things I setup when I did the upgrade such as the start page and desktop screens. My start screen is perfect and I hate to set it all back up from scratch if there is any way to keep it somewhere and return it.
I will say, the clean install has always been my preference with any version of windows and it certainly made a nice difference in many ways on the laptop that I've already done both the upgrade and later the clean install.
I have BizSpark, and I'd like to upgrade my Windows 10 Home computer to the Pro version. I downloaded the "Multiple Versions" ISO from MSDN, but when I run it from within Windows, it only lets me re-install the Home edition. How do I upgrade without doing a clean install?
I learned how to perform the clean install of Windows 10 after the upgrade. The problem is after I'm finally at the desktop. There seems to be a background process of installing the realtek drivers and Nvidia drivers. But Windows update will also detect the Nvidia drivers and install them as well. But they fail every time.
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
Recently upgraded to w10 from w8.1 via the upgrade option, then proceeded to make a USB boot with w10 and performed a clean install.
However, something is fishy with my system and w10 so for now i want to revert back to w8.1 via a clean install of w8.1
When i installed w10 however i noticed i have an abundance of partitions, and preferably i would only like to have my SSD and HDD as optional storage spaces. I do of course not want to delete any necessary recovery or system partitions, but to me it seems like i currently have too many.
Which of the partitions in the picture below can i delete? Is it safe to delete all the recovery partitions when clean installing w8.1 from usb? meaning that will the installation create the necessary partitions required by windows?
I did a clean install of Windows 10 Pro x64 using the method that everyone knows about by now that was written up on various sites today i.e.:
Ran the Media Creation Tool and upgraded my copy of Window 8.1 Professional with Windows 10 Professional. Looked in Control Panel --> System and it said my copy of Windows was activated. Then I ran the Media Creation Tool again and downloaded the ISO. Burned ISO to DVD. Restarted computer, booted into Windows installer on DVD, customized the install by formatting drive, did a fresh install of Windows 10.
Now when I go into Control Panel --> System it says "Windows not activated". When I click on the Activate Windows icon and click the error details link I get the error code: 0xC004C003.
I should note that the Windows 8 OS came pre-installed on my laptop which I bought brand new. I don't think that matters?
I had a licensed windows 7 PC and did the in-place upgrade to windows 10. However my main hard drive (an SSD) is too small and I want to upgrade it. I understand that if I do a clean install (from an ISO/USB) then windows 10 should still recognise my PC as it was activated.
However, if I change the hard drive (or add memory, add a graphics card etc) does windows still recognise my PC or do I have to go through the stupidty of installing windows 7, installing the service pack, waiting for the inplace upgrade to windows 10, activating, and then wiping everything in order to do a clean install!?!?!
i did the win 10 free upgrade i had to before i could do a clean install. im not having any problems with the upgrade so far but i have always did a clean install of windows before this.
I upgraded from 8.1 (genuine Sony Vaio ) using the media creation upgrade option, it installed and activated to windows 10 pro.
I then used the same media creation tool to download the iso and used Rufus to put it onto a usb so that I could do a clean install.
I installed it and skipped the parts prompting for a product key, however once it loads up when I try to activate it states 0xC004C003 details section says the key has been blocked?
Received a MSI laptop with pre-installed W8.1. Planning to install a new SSD on m.2 slot. I have several options to update to W10.
p.s: I am keeping both SSD and HDD in my laptop
1) Clone from old HDD to new SSD using MSI burn recovery. Then update to W10 2) Upgrade to W10 on my old HDD. Get W10 activated. Perform a clean install on SSD. Lastly, format my old HDD as secondary drive
