I've got a Nokia Lumia 530 and it was running happily on Win10. With the new build out you had to firstly roll back to 8.1 Update 1, then install Windows Insider and update.Unfortunately I don't seem to have enough drive space to do the update. It needs 1.35 gig and although Storage Sense says 1.39 gig available, it won't progress due to insufficient space. Must be some temp files or something.I've moved every app I can over to the SD card but to no avail.
I tried updating normally using Windows Update. It fails in less than 10 seconds.
I tried using Media Creation Tool. It downloads the update, but at the end it fails again and tell me restart my PC and try again.
I tried deleting the files at C:/Windows/SoftawareDistribution/Download and then going back to Windows Update. It didn't work.
this Build is crashing and freezing in almost any game that I play or application that I use. I'm only able to use Chrome and Office properly. Everything else usually freezes and crash.
Since the start of the program that i've been an insider, but after updating to the RTM build I'm unable to see new builds in Windows Update.
I was in the Fast Ring and updates were no where to found. I left the program, made me an insider again and still not receiving updates. What should be the problem?
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
For a few weeks I'm already stuck in Build 10166 of the Windows Insider program, Microsoft said that insiders would receive the launch version before public but I still haven't received an update to the final version yet. However non insiders already have the final version. I'm refreshing the Windows Update every half an hour and it only gives me Windows Defender updates every now and then.
Everytime i click reset windows it restarts does the load (48% etc) then it says 'unable to update' and the reset fails and just goes back to how my laptop was before.
Last week my PC got a update of .net framework and MS office...according to that I updated but because of this update it broke the update settings of w10...i'm unable to update to new build(10041)...also I tried to turn w10 in safe mode to make restore to previous restore point but after pressing f8 it didn't show me the safe mode options.
I have been an Insider since the beginning and have received all the updates during the past few months. I'm currently stuck in build 10166 and Windows Update informs me that my device is current. Checking for updates yields nothing new except that Defender is updated daily, sometimes more than once. On the next page I see a "Fix Me" button, but when I click on that up comes a dialog asking if I want to discontinue future builds.
I ran the update troubleshooter, which reports: "Problems found: Service registration is missing or corrupt. Not fixed". I don't know if this is the cause of my problem, nor do I know how to repair the service registration. I suspect this will impair my upgrade to the final Windows 10 build on Wednesday.
So, I've been checking for updates pretty frequently for the past couple days, and build 10041 has never shown. I've gotten some sound driver updates, some Windows Defender updates, and a Dictionary update that refuses to install and has refused to install since I ran 8.1, but 10041 doesn't show up. I tried downloading the iso from mega but idk if it was a 32 bit image because it failed to mount.
I'm on a Surface Pro 2 running build 9926 of Windows 10.
i'm new to technical previews (well i had the windows 8 tp but i was a kid who didnt know what day it was) and i want to know if windows 10 automatically updates whenever a new build is available or if i have to reinstall windows
I have 2 desktops and 1 laptop. Both desktop update fine to build 10586 but the laptop keep saying up to date after check. Even try Lan connection still no go for laptop to update. How to force laptop to update? All running Windows 10 Pro.
I have been successfully updating as a Insider Win 10 since Oct 2014 with no problems. I recently did a clean install of build 11102 and it seems ok. A few slow downs and hangs but generally ok. Recently I received notification from MS that build 14257 was available for download. I downloaded the file as always and it went through the usual prep and getting ready etc. When it rebooted to start the install I get a screen asking me to "Choose your Keyboard L/O" I choose United States and then it reverts back to "Choose an Option" I choose "continue & Exit to Win 10" and it boots back into my build 11102. I've tried this three or four times with the same result. I have downloaded and run the MS Fit-It for upgrades to no avail. I have tried using a Local account, still does the same thing. I created an ISO TechNet and it does the same thing when trying to do a clean install. I have run DISM and SFC /scannow
I've tried twice now to update to build 10158 and each time it throws a blue screen with an error of:
Recovery Your PC needs to be repaired There isn't enough memory available to create a ramdisk device Error Code: 0xc0000017
Since the build is brand new obviously there are no threads or solutions to this problem. Why this particular build would give me this error? I have never had this problem with any previous builds.
So, recently (after the November build release) I woke the next morning to find that my computer underwent a rather major update. After which, it seemed, my home network was thrown out of wack. I immediately rolled/reverted/recovered to previous build. But now everything is out of wack. Most of the time I have to restart my computer just so it'll communicate with my printer to start printing.
And restarting the computer is twice as long if it restarts at all. Most of the time It gets stuck in the "restart" progress animates (the rotating circles) and I have to press the restart button on the computer tower, with great regret and dread. Transferring files from one windows 10 device to another is a 50/50 hit or miss. I'm not literate when it comes to networking and was super happy how everything was.
But now, not only is my wifi home network out of wack, but my computer itself is wonky. I figure I might as well reinstall the newest build in hopes that it'll at least fix a fe of the problems. But anytime I check for updates, the newest build no longer shows up.
I'm trying to roll back to the OEM Win 7 on this machine. On the setting page "Updates & security" the options under "recovery" did NOT include rolling back to Win 7. The only choice was to roll back to the previous build. I thought perhaps I would have to work my way back to 7 build, by build. I started out with 10041, then 10130, then 10240. I clicked the "Back to previous build, hoping. Well, it went back to 10130 no problem. However, that is it. Going the Setting, Updates& Security route within this roll back of 10130 there is no way to keep going back to finally get back to Win 7.
I am just about to clean install from build 10074. I assume that it will update to the latest build once installed. I was wondering if I need to install drivers and wot not before upgrading via WU or do that after the upgrade to 10130 is compete.
Right, so I've got a laptop that I'm currently trying to install windows 10 tp onto. It's the exact same model as the one I'm running on (it's my brothers, and I'm trying to fix it for him), but I've hit a snag.
The insider program website says that you can burn the .iso to a dvd and install it like that, but I've done that, and the laptop just stalls at a windows logo screen.
There's no operating system currently installed -- all 900 someodd GB are free and, using a windows 8 install disk to access a command prompt, DISKPART says the partition is healthy. I've cleaned and formatted it several times now to no avail.
after the installation of Build 10565, i cannot longer join the Homegroup.
Tried this:
[URL]
no good at all.when i need to do the last step to give users full control, this does not happen. But i am administrator and own "MachineKeys". So i have full control.....
in my network i see 2 pc's, mine and one other. All 3 others computers do see 4 computers.
I grabbed the install.esd from the upgrade from 11102. Created an ISO using DVD and USB. However, I get this "setup cannot continue due to a corrupted installation file". Tried going back to 11102 and repeated the process three time. Still same thing. (I have grabbed the install.esd file before and after the installation but it didn't make a difference. I'm trying to do a clean install by the way. Otherwise I just have to live with the updated OS.
Am trying to install build 10074 on a freshly formatted (no dual boot) 256GB SSD in my Dell XPS 12 via USB. I get through the installation, reboot, do the initial setup, provide my MS account, then get stuck. White screen with frozen ball circle and "Just a moment..." displayed.
