Installation Unknown Error C1900101-40017 Reported In Windows Update
Aug 10, 2015
I have tried to download and install Windows 10 quite a few times. It freezes at the point where it has completed 75% of the installation and I think it is just about to 'Restart' once again to go into the final 'Settings' phase. The only way to get out of this that I've found is to power the machine off and then back on again, the system tries to recover the installation and then the previous version of Windows is restored. The unknown error C1900101-40017 is reported in Windows Update on each occasion.
View 20 Replies
Similar Messages:
Oct 14, 2015
I get as far as the notice to sit back and relax and the computer will switch off and on. Then it switches off and does not come back. Why can I not get Windows 10?
View 1 Replies
Jul 29, 2015
I have an HP Pavilion dv6 running Windows 7 Home. I decided to update to Windows 10. Download was successful, it attempted to install the update I guess, was on the settings part. It got stuck though on a blank screen with just a cursor for two hours so I turned off my laptop. Then it restored Windows 7, and now it's redownloading the Windows 10 update again. Thing is, I got an issue with my laptop. Whenever it boots up, I get an error message about the fan not working properly and I have to hit enter for it to continue with the restart otherwise it will power off. Could that have affected the update to Windows 10?
View 24 Replies
Sep 13, 2015
I've got a big problem win my Win10. Every time i install 10 it has no internet connection, it shows that none connections are available and tells "Modem has reported an error (error 651). Everything is working well on Win7. I tried many things to fix it but nothing seems to work.
My network card is Qualcomm Atheros AR8171, and modem is some TPLink
View 3 Replies
Jul 30, 2015
Since installing Windows 10 and Outlook 2013 on my main machine, I've had the following error when trying to send e-mails: Sending reported error (0x800CCC13): Cannot connect to the network. Check your network connection or modem.Oddly, the test e-mail when setting up the account works. I even re-installed Windows 10/Outlook 2013 and the same problem occurred, I tried a different e-mail account on another machine and the same error occurred.I can send just fine using Windows 7 and all the config options are exactly the same.
So far I've tried:
Disabling the AV software
Disabling all Outlook plugins
Tried different e-mail accounts
Recreated outlook profiles.
what I could try next? I'm currently running "sfc / scannow" as a quick Google shows that this may resolve it for some people.
View 19 Replies
Aug 8, 2015
Every time i try to upgrade to windows 10 i get an error:
Upgrade to Windows 10 Home
Installation date: 8/8/2015 4:42 AM
Installation status: Failed
Error details: Code C1900101
Any fix that actually works so i don't have to try 100 things. The only thing to note is i have two drives, one is an ssd which is where my current windows is installed and its path is E, not C, just wondering if that may be the problem.
View 1 Replies
Aug 7, 2015
Not much on the web about this failure. Some threads talk about disconnecting all USB and devices so you just have the core system...really? Should I call MS about this? I'm sure they are flooded with probs.
View 1 Replies
Sep 12, 2015
While installing windows 10, I am getting errors C1900101-20003
View 1 Replies
Jul 29, 2015
On Window 8.1. Boosted the install which a lot of people are doing by clearing SoftwareDistribution/Download and running the cmd prompt.
Downloaded the Windows 10 update, as soon as the Preparing to Install dialogue was done, the computer restart, trying to install a normal Windows 8.1 update instead.
Once I am booted up again, I get this error [URL] .... and try the fix.
Once I try and redownload the update again, it skips to 100%, then fails the update with the error 80070643 being reported.
View 1 Replies
Sep 9, 2015
Everytime I try update my windows 10 it gives this error.... I've searched google and all i see is ads for tech utilities...
View 9 Replies
Nov 29, 2015
When I run Windows Update on Windows 10 (ver 1511), I get the following error:
Hewlett-Packard - Imaging - Null Print - HP Deskjet 3520 series - Error 0x800f020b
I looked up the 0x800f020b error code and it says this occurs when an attempt is made to update drivers for a device that isn't connected. In my particular case, this device is connected via the wireless network and appears in my list of available Printers.
How do I get rid of this error?
View 1 Replies
Sep 16, 2015
When I try to download and install my two updates ( Cumulative Update for Windows 10 for x64-based Systems (KB3081455) and Update for Windows 10 for x64-based Systems (KB3081452) ) I get the error code 0x80070246 for both of them.
I tried simple things like restarting, using the troubleshooting to solve any issues, I downloaded the file named WindowsUpdateDiagnostic and run that too with no success.
I figured that it might be a problem with GlobalInstallOrder.xml like the one described here [URL] .... but I couldn't apply the solution, maybe because of the different OS.
I also downloaded the standalone updates and tried to install them but I get an error every time.So now I'm stuck.solutions that don't include refreshing or formatting as there are a ton of apps that I will have to manually install.
I have an Acer 5942G, 8 Gigs of ram, a 256 Gb Crucial SSD, i7 720 QM and a 5650m.Windows are x64.
View 9 Replies
Jul 29, 2015
I get the error "Code 80200013" when I try to upgrade my windows 8.1 to windows 10 from my reserved upgrade through Windows Update.
Additionally when I try to create a usb installation media through the tool (this one here [URL] ....) I get the message "something happened".
View 5 Replies
Dec 23, 2015
So, I have Windows 10 already installed on my PC. I upgraded it last Summer from Windows 7 for free.
I've been trying to update it for the past 6 weeks but keep getting the error: "Windows 10 couldn't be installed. Windows can't be installed because this PC has an unsupported desk layout for UEFI firmware."
I have 3 hard drives and Win10 is running on my main SSD, disk 0. I remember having some funky upgrade issues and needed to unplug certain hard-drives due to strange ownership issues. Heres is a look from Disk Management. I've got an MSI m-board plus BIOS, all new.
[URL] ....
View 9 Replies
Apr 22, 2015
I'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
View 6 Replies
Dec 9, 2015
I tried google searching just the direct phrase of "system and compressed memory", but came up with nothing. I have never seen it before until recently, and it is using half a gig average. When I open file location, it does bring me to the windows folder, but it does not mean it was something that was put there by windows.
View 5 Replies
Sep 12, 2015
After updated Windows 10 (PC) from build 10166 to build 10240. Then I can not download app in Windows Store. An error code is 0x803F7000 and '"try again latter".
View 1 Replies
Oct 7, 2015
Ever since Windows Update KB3093266, my laptops Nvidia GTX 970m card has been disabled and shows a code 43 error, which says "Windows has stopped this device because it has reported problems. (Code 43)".
Uninstalling the update doesn't work, and I've installed and removed the driver multiple times. The Windows update gets downloaded again whenever I restart my computer, if I removed it. I've tried the update hider, but that didn't work.
View 9 Replies
Jul 30, 2015
Im using an activated version of Windows 10 but updates fail saying "There were problems installing some updates, but we'll try again later."
So far I have tried:-
Using microsofts fixit app, it said it fixed errors but the update still wont work.
Editing the registry - UX from 1 to 0
those are the main fixes I have tried plus some more basic ones.
View 1 Replies
Oct 12, 2015
Every time i try to install some drivers from Windows Update I get the error code 0x80073afc ....
View 3 Replies
Aug 20, 2015
I have a Vaio laptop and migrated my factory Windows 7 install to an SSD about a year ago, which apparently left me with no system reserved partition. I used these instructions to create a new system reserved partition, but I'm still getting the same 'Couldn't Update the System Reserved Partition' error when trying to start the Windows 10 upgrade. What else I can do to get the upgrade to work? I really don't want to do a fresh install of Win 7 (assuming that would even work). My diskmgmt screenshot is below.Also found this thread on reddit , but not sure if that really applies to my situation.
View 4 Replies
Aug 11, 2015
So far, things have been ok with my Windows 10 update. Today I tried to look for updates, as I think this is the regular Patch Tuesday. However, it takes a long time, then gives me the error in the title. Using the update fixer doesn't work, I just get the "Service Registry is Missing or Corrupt". What would be causing that?
I'm also getting a problem with task host not wanting to allow shutdown, what's the deal there?
View 14 Replies
Sep 6, 2015
I have upgraded to windows 10 for a few weeks now and over the last couple of days it has stopped installing any windows updates, the error code that pops up is (error 0x80070643)
It's also stopping me from installing some other programs but not all.
I have tried restarting the computer, Nothing I've tried restarting wuauserv service, Nothing I've tried the troubleshooter for windows update, it says problems were found and they were fixed. I have also cleared the cache for update downloads from the following folder: C:WindowsSoftwareDistributionDownload
In the Windows update page it seems to take forever to install the updates and then throws out the following:
There were problems installing some updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information:
Security Update for Microsoft ASP.NET MVC 4.0 (KB2993928) - Error 0x80070643
Security Update for Microsoft Silverlight (KB3080333) - Error 0x80070643
Security Update for SQL Server 2008 R2 Service Pack 2 (KB3045313) - Error 0x80070643
Update for Microsoft Visual Studio 2010 Tools for Office Runtime (KB3001652) - Error 0x80070643
Note: this is after clearing the cache in the above folder location.
View 6 Replies
Jul 30, 2015
The update automatically tries to install but I keep getting this. It says Windows 10 couldn't be installed. We couldn't update the system reserved partition. Several times I got error code: 8000FFFF.
I'm trying to update a Dell Optiplex 780 with Windows 7 Pro. SP1
View 2 Replies
Sep 28, 2015
I have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
View 2 Replies
Jul 28, 2015
i have windows 8.1 and already reserved windows 10 , but windows update doesn't work always stuck at checking for updates i tried all fixes on the internet and it didn't work . so how do i get windows 10?
View 9 Replies
