Installation :: Unstable Desktop Post Upgrade
Aug 17, 2015
Having upgraded to Windows 10 I am now unable to use my computer at all as when attempts to upload the desktop it continually fails to do so, the main desktop image is loaded but as it attempts to then add the icons it goes blank for a moment and then attempts the same procedure again. This occurs about every 2 to 3 seconds. On some occasions it displays the icons momentarily but often not at all. The mouse can be moved around the screen but I am unable to do anything further with it as the blue 'wait' circle is continually displayed.The odd thing howvever is that I left themChine running overnight in the hope that it would stabilise but when I returned to it Norton was requesting an upgrade whilst the problem persisted. This box was totally functional and i was able to proceed with it, which enabled the PC to then receive updates and reboot, with the same problem however. I am now forced to switch the machine off via the power button as I cannot shut down normally.
View 1 Replies
Similar Messages:
Aug 18, 2015
Since the upgrade to Windows 10, my main monitor, a DVI-Dual Link monitor, has stopped working after posting. I Have 2 other monitors, one DisplayPort, one HDMI, both working. I can use my dvi monitor, if it is the only monitor plugged in, to use the BIOS, but after Windows Loads, the display goes black, and "No Signal" is displayed. Also, It is not the monitor because I could use the HDMI with the monitor for it to work, but to get the 144hz I need to use dvi-D
I have tried:
-Uninstalling all Video Drivers
-Uninstalling CCC
-Reinstalling CCC
-Refreshing Windows
Specs:
FX-6300
CM 212 EVO
Gigabyte GA-970-UD3P mobo
View 1 Replies
Aug 19, 2015
After upgrade from W81 to W10, I have occasional Notepad, Thunderbird email, and PhotoPhilia crashes, no data saved. Occasionally the task does not crash but does disappear from the task bar (visible from Task Manager) though I can't get back into it.
I have not upgraded any of these products. I'd have assumed that Notepad, at least, would be current. I don't know how to find which build I am on.
View 3 Replies
Sep 19, 2015
Just this past day I upgraded my Dell XPS 15 from Windows 7 to Windows 10, and I noticed I'm now having the same issue as many recently-upgraded users, specifically that when connected to a TV via HDMI, audio does not switch over to my TV's speakers, however, it stays with my computer's speakers, and video works perfectly fine.
In the audio devices panel, the Digital Audio (HDMI) speakers are displayed, but are listed as "not plugged in", as displayed below.
My drivers are all updated, cables tested on multiple devices, I'm running a NVIDIA GeForce GT 540M, driver version 10.18.13.5362
I've seen this problem in other threads, tried multiple solutions, but to no avail, therefore would like a solution specific to my model/make.
View 6 Replies
Jul 30, 2015
After Windows 10 installation, my cursor recycles for a split second every couple of seconds, as if it's attempting to install something, causing missed keystrokes, whether in Edge, Explorer, Word, Excel ...anything. If it appears to settle down, I just have to move the cursor and then I see the cursor recycle again. How to I get rid of this instability? It's like type-ahead back in the 1980's, even worse with all the missed keystrokes. Makes this very hard to use. Here's what it looks like:
View 9 Replies
Aug 5, 2015
Preparing upgrade to 10
Did clean install Window 7 to customize, sysprep, image, install on several duplicate PCs prior to upgrade
1st drive is SSD, 2nd is HDD
SSD partition c: os and d: virtual box
HDD e: data
wrote answer file move user and program data from c: to e:
Something happened post sysprep and partition letters switched d and e, I changed the drive letters in windows and now can't get into profile There is a shortcut to e on the d partition of SSD Tried reassigning letters using diskpart but they don't remain when entering windows but go back to the wrong assignment.
I googled this and apparently it happens but I don't know why. I can only think that I was lucky to image the clean OS however if I can fix this it would save me time. If not, I will get rid of the d: partition and put that post sysprep
Here is the answer file
< ?xml version="1.0" encoding="utf-8"?>
< unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
[code]...
I can't seem to fix this problem
View 3 Replies
Aug 6, 2015
I've seen lots of people posting about this all over the internet but as of yet not found a clear fix to my problem. I registered for the upgrade a while ago and the 'check' said that my system was fine. It's a HP TouchSmart 520 and is 2 to 3 years old.Today I got the message saying that I could do the upgrade and all seemed to go well, no errors throughout the installation. However, as soon as one of the users logs on the desktop just flashes and you can't access anything other than ctrl-alt-del and the task manager.
I've tried booting into safe mode and trying a windows update (boots in safe mode with no flashing) but it finds nothing, and I've looked on the HP website to see if there is a W10 driver. It gives you a file to download which should check for drivers but that doesn't run in safe mode so a non-starter. And if I use the HP website it basically says that you need to use the windows update; which just sits there doing nothing.
If I go into device manager and try to do an update it says that the graphics driver is up to date. I am a bit hacked off that the HP website suggests that it's a product that's not been tested with W10, but the Microsoft check said all ok.
View 1 Replies
Nov 16, 2015
I just upgraded to W10 from W8.1 and have lost my desktop short cuts and files. How do I recover them. During the upgrade process it said all files were transferred properly. I have looked at windows.old, but don't know what to look for or how to recover them from that file.
View 9 Replies
Mar 15, 2016
My wifi adaptor is a TP-Link WN951N v3.2. My modem is a Netgear DG834G. My wifi speed is really unstable. Normally my maximum connections speed is 9.5mbps, but it is very very unstable. Sometimes the connection speed drops to 0.8mbps for a while. When the connection speed drops I try to ping my modem using the CMD ping command. When I get heavly speed drops I notice that the ping between my pc and my modem is 200/500ms. So really high and unstable. My other wifi devices like smartphones doesn't have problems. They works fine. Here is what I tried to fix the problem :
-Reset my modem to factory settings
-Upgraded my modem's firmware
-To change modem's wifi channel
-Clean installation of Windows 10
-Tried both manufacter driver and windows driver
-Disabled useless settings in Windows 10 like geolocalizzation
-Disabled windows firewall
View 1 Replies
Aug 28, 2015
I clean installed Windows 10 about 2-3 weeks before the problem. During the clean install, the computer crashed once, but was otherwise rock stable.
The first time I had the current problem I got an error saying something like Boot Failed and the Bios was reset to its default values. The computer restarted and was rock stable. I immediately did a memory test using Windows 10s memory tester and all was good. I also rebooted with no problems, but when I shut the computer down all I got was a blank screen.
I removed all the devices from the motherboard and tried using each of the two memory modules in each of the four memory slots, and it posted just once, but I was unable to replicate this when I shut the computer down and tried to restart the computer.
I tried several times to remove the battery to reset the the Bios to no avail.
I sent the motherboard to Gigabyte, but they said the motherboard works just fine!!!
What should my next step be? I highly doubt that it's the CPU, and that seems to suggest the power supply.
I am using the onboard DVI to my monitor. No gaming and no overclocking. I have a i5 Intel Haswell.
View 9 Replies
Sep 30, 2015
Sony VAIO AIO model SVL241290X, Core i7, 2Tb HDD 64 bit, started doing a startup/shutdown constantly (not exactly a loop) never getting to POST or Welcome screen for Windows 10. It started doing it when I hooked up an old HDD to move files from it to the VAIO which had been in a machine that did the same thing. Thought it was a bad motherboard on the old PC, but now I think it's a virus. Whenever I power the VAIO down by pressing/holding the power button, and starting it up again, it just resumes with HDD activity but never shows anything on the monitor.
Even the VAIO Assist button doesn't work. Also can't get to BIOS or Safe Mode. Sounds like a virus - maybe a rootkit MBR virus? Right now I can't do anything with this machine. Normal troubleshooting does not work. I don't have any restore discs or bootable recovery discs, although I am creating a copy of Windows 10 on USB drive with Microsoft's Media Creation Tool. But, without being able to designate the USB port to look at first in BIOS, that won't work either. Most important things are backed up, but I have a few things I would not like to lose.
View 1 Replies
Jun 12, 2015
So I just took part in the Windows 10 Insider Preview a couple of days ago, and I have to say, Windows 10 is a great step up from Windows 8, they did an excellent job so far. There's just one problem: File Explorer is extremely hard to use. Not only does the file explorer freeze all the time (even on folders with almost nothing in them), when it does freeze, it goes back to the top of the folder when it unfreezes.
What I mean is that I can be half-way down a 260-count file folder, like this:
Then it will freeze, and after it unfreezes, it goes back to the top of the folder, like so:
Doing simple tasks such as moving, copying, renaming, deleting and even scrolling and clicking causes File Explorer to freeze, sometimes even when it's idle!
And what's weirder is that the glitch doesn't happen when your opening a file for a specific program (say you click 'open' in Word and you get the 'Open' dialog box where you can pick a file).
I posted this over to Windows Feedback too, but I don't think it supports user comments, so I'm posting here to see if there's any fix. If there's any fix for this, let me know. It's been annoying me for a while now.
View 9 Replies
Aug 10, 2015
My interent on my custom desktop, as far as I can remember, has functioned fine for a long time now. However, after upgrading to windows 10 and having it around for a while, I noticed a sharp decrease in internet speed. I've tried multiple solutions, but nothing seems to have worked. It only seemed to start occurring after installing Windows 10.
My specs:
Service: CableProvider: AT&TConnection: WifiAdapter: Intel® Dual Band Wireless-AC 7260 + Bluetooth* for DesktopModel: CustomOS: Windows 10 (Windows 7 Upgrade)SpeedTest: 1.80 Mbps
Attempted Fixes (X = No effect, 0 = Some effect, ? = Unknown effect)
X Automatic Troubleshooter
X Driver update (Link: Intel Download Center )
X Virus Scan
X Removing excess browser extensions (Chrome)
X Clearing Cache (Chrome)
0 Booting to Ubuntu? (Faster speeds after idling for a while)
? Switching to Microsoft Edge (12 Mbps on 8/8, 2.41 Mbps on 8/9)
X Booting into Safe Mode with Networking (No Wifi option)
X Disabling Internet sharing option
X Disabled Power Saving option on Wifi adapter
X Switching to FireFox (2.12 Mbps)
X Turned off sending updates to other computers
X Turned off nearby A/V Receiver with bluetooth and radio
X Rolled back wifi adapter driver
X Updated Wifi Adapter via Windows Update
Notes
Laptop with similar (if not the same) adapter connects normally (Acer Aspire V 15)Started after Updating to windows 10 (May not have noticed until nowWorked fine on windows 7Wireless Network Connection Status > General > COnnection > Speed: 144 Mbps ~ 52 MbpsAnalyzed hard disk for needed Defragmentation, 0% fragmentedUsing [URL]
View 7 Replies
Oct 25, 2015
So my asus ranger vii m/b settings aren't stopping. The external samsung M3 portable HD from interfering .
So keep getting the error:
bootmnger not found error
CTRL-ALT-DELETE required
Needless to say samsung and asus aren't supporting...
View 2 Replies
Aug 6, 2015
Last night I set my lenovo y50 to update to windows 10 after I went to sleep. Now that I'm awake i get the windows 8 lockscreen but after I enter my pin I get a black screen with a cursor. I can open taskmanager, and I have gotten several error messages regarding ismagent.exe and sethc.exe.
View 1 Replies
Oct 6, 2015
I recently brought a new wireless network adapter for usb (Asus usb N14) and since I've started using it the connection is really unstable, I'm on the same connection on my iphone and it's just fine but on my pc it's really struggling, I've ran speed tests and it'll work fine when randomly it'll just go down, I'll still be connected to the router but have no internet. Right now looking at the wifi graph in task manager it literally going straight up for a few seconds then straight back to 0 when downloading a file, and I'm unable to download any large files because it'll just fail after about 30 seconds.
I've updated it to the latest version with no change in performance or reliability. One other thing I'm at Uni so other people will be using the connection and I've no access to the router unfortunately.
View 1 Replies
Sep 24, 2015
I am 1 step away from throwing my laptop out of the window!
After upgrading from windows 7 to windows 10 and experiencing a whole shitload of problems with graphic card drivers and wifi connections, I decided to clean install windows 10 by using the ISO image (DVD made with the microsoft tool). After doing this windows 10 worked reasonable, for about 1 day. After this it started to crash upon startup and it was unusable. So, I decided to do have 1 more go at it and do another clean install.
What do I get ? Now windows says that it cannot activate the damn OS and that I can 'buy a product key' in the store ... Well, it was activated automatically after upgrading, then it activated automatically after a clean install as well. Now, I did another install and it won't activate.
View 2 Replies
Jul 30, 2015
No matter what I do, eventually Windows 10 hangs and never recovers, forcing me to do a hard reset. Sometimes open programs will continue to let me use them, other times not. The Start menu does not respond, however, and any new instances of any programs I try to start never actually load. There is no consistent trend to it at all. At first I thought it was a dying hard drive, but the drive is fine and the problem happens even when it's not being accessed. Then I thought it might be my USB WiFi adapter, but it's working fine as well.
I thought it might be the "the last USB device installed isn't working" notice that keeps coming up (which is amazingly unuseful since I didn't install any new USB devices) and disabled the offending USB port in Device Manager, but that did not stop it either. Windows Update has been completely useless for this as well. The last system hang I experienced happened not even 10 minutes after booting the system up.
View 5 Replies
Aug 1, 2015
I have upgraded to Windows10 on my HP 15 Notebook PC, the WiFi connection strength is unstable and I keep getting disconnections while playing and browsing.In addition I note that I have never got that sort of connection problems before I got Windows10 also my sister which has the same notebook is facing the same problem since she got Windows10 while my brother which didnt upgrade to windows10 doesnt have this problem.
View 1 Replies
Apr 21, 2015
A desktop icon suddenly appeared on my desktop.. If I delete it, the whole desktop is also deleted... The desktop folder on the drive, does not contain that icon...
View 7 Replies
Nov 29, 2015
I just clicked the Yes to do the automatic upgrade from Windows. The system said all of my files and folders would still be here when it was done. ALL OF MY DESKTOP FOLDERS ARE GONE... This had all of my family photos in them that I had just finished preparing in my Photoshop Program that is also No Longer on the computer.
I want my folders and my pictures back NOW!!!
View 1 Replies
Jul 31, 2015
I just updated to Windows 10 from Windows 7, and now my computer starts flashing out of no where. The taskbar and the desktop starts flashing. When this happens I can not do anything. When it stops, I can not use the start button.
View 3 Replies
Aug 10, 2015
It was working fine with Windows 7. I upgraded to 10, and it won't wake up. I have to hold down the power button till the computer shuts off and start it up again.
I went to Dell support, updated all drivers, no luck.
It's a Dell XPS 870.
View 3 Replies
Nov 19, 2015
I upgraded to windows 10 from windows 8 shortly after release, since then I've been experiencing frequent freezing with audio glitching . I experience the freezing regardless of what I'm doing, it freezes during gaming, watching videos, listening to music, typing, and when the pc is not in use. The strange thing is that I can unfreeze my computer by pressing any button on my keyboard.
My specs
cpu - AMD Phenom x6 1055t
gpu - XFX Radeon r9 270(i'm not sure if it's "x" or not)
mobo - Gigabyte GA-MA790GP-UD4H
Ram - 2x2gb ddr2 1066 patriot ram(running at 800), 2x1 ddr2 800 kingston value ram
psu - A 700w Bestbuy brand powersupply
View 1 Replies
Nov 23, 2015
I upgraded from windows 7 to windows 10 over 4 days ago. After windows 10 was up, all the folders/files in my desktop were moved somewhere. I did a file search and moved them back to the desktop. I was on a general user admin account. Shortly after, I logged into my outlook account on windows 10. Could still see all the files/folders on my desktop.
But when I rebooted my pc for 1st time after upgrading to windows 10, all the desktop files/folders disappeared. File search could only find the icon links in ..../Recent folder. No physical files/folders exist for those icon links. Online MS techs had tried to look into my pc remotely but they could not find anything. One online tech suggested Office 365 could recover them since the files may be saved in Office app, but I used Office to search for the files with no success.
All other personal files/folders not saved on desktop are still OK. All was lost for the files/folders on desktop?
View 9 Replies
Aug 1, 2015
I just upgraded my Win 7 X 64 laptop to Win 10 and have the same desktop as on 7. I find I am unable to reposition any of the icons on the desktop like I could on 7. Otherwise the are normal. as they work just like always. I can click them or delete them but not move them. How to reposition the desktop icons on Win 10 Pro?
View 10 Replies