Windows 10 is set to automatic updates. It was trying to get the Windows Defender Update KB2267602 for two days but the message was always "waiting for server". This has now disappeared from the update screen and does not appear on the installed updates. Is this a problem?
View 2 RepliesI've been trying to update my windows 8.1 to Windows 10 for at least 10 times now and it always stuck at around 60% It reboots itself a few times and it always comes back to the circle screen with the % progress but getting around 60% it reboots and it gets stuck there... black screen, no cursor, no sound.
I've tried to plug it into a secondary screen thru hdmi but nothings happens; also I've uninstalled my antivirus since I've read it might be the problem but it didn't work..
I've got a Dell Inspiron 7537 Windows 8.1 x64 Intel Core i7, 8gb ram, Intel HD Graphics 2gb + Nvidia Geforce
My installation is stuck in a reset loop. The Win 10 Ready to Install came up, so I clicked Start and it rebooted, back to the login screen, and then Windows Update came up saying it needed to Restart Now. After a couple of minutes the Win 10 Ready screen comes up again. I've rebooted about 20 times and get to the same point every time.
View 2 RepliesI had updated my Windows 7 to Windows 10 first and then wanted to do a clean upgrade. I followed the instructions but my computer seemed to be stuck on 'Resetting this PC at 1%' my laptop must have died during this and now every time I try to start up my laptop it gets to the load screen and then goes to black and then tries to reboot again. I'm lost at the moment.
View 3 RepliesI was updating with mediacreation tool, and it stuck at %93 black screen There is not cursor, says it is configuring settings %75 .....
View 3 RepliesUpdate stuck on spinning wheel following download of drivers etc and after copying files. Black screen with blue logo and continuos spinning wheel.
View 9 RepliesI have a desktop PC running 8.1 x64. I decided to upgrade using Windows Update to 10. The files are downloaded with no problems, and then it asks for reboot. And when installing the system, the process stuck at 12% (copying files 42%). It just stays there for hours. If I force a reboot, the operation starts to revert to 8.1, and when it finally boots, I see this error: C1900101-2000D.
I haven't found much information about the error, I've tried the installation for a couple of times now, and I'm getting a bit desperate.
For a few weeks I'm already stuck in Build 10166 of the Windows Insider program, Microsoft said that insiders would receive the launch version before public but I still haven't received an update to the final version yet. However non insiders already have the final version. I'm refreshing the Windows Update every half an hour and it only gives me Windows Defender updates every now and then.
View 9 Replieswindows update is stuck for months on 25%, is this problem known? or is there a way to reset it?
View 1 RepliesI began an update for windows 10 and it has been stuck at 59% for hours is that normal or is it frozen and if it is frozen is turning my computer off and back on going to damage it? What should I do. This is on a brand new computer .
View 1 RepliesMy issue here is that windows update is stuck at 0% and not downloading anything.
No updates are installed yet, none. I have tried going through a long process of deleting SowftwareDistribution folder and I have used windows updatediagnostics. Nothing works. In addition to that every time at boot and before shutting down it displays "Getting Windows ready. Don't turn off your computer" for a short period.
I've discovered that the Win 10 November update is listed but is completely stuck at "downloading update" and never gets any further.
I've run "Troubleshooter" which found a couple of problems and fixed them but still no November update and i also see that the latest February update has "failed" as well.
Everything i try doesn't start the updates so i'm at a complete loss at what else to do.
Windows Update stuck at 9%
View 9 RepliesI am having problems installing Windows 10 updates...... again.
This update is dated 29.10.2015 and consists of 2 updates.
KB 3105210 states "waiting for download" and KB 3106932 states "waiting for installation" It has been stuck on this for several hours and my attempts to use the repair tools have failed to resolve the problem.
Cumulative update for Windows 10 version 1511 (KB3116908) gets stuck 'waiting for download'
Troubleshooter found no errors.
So far no real issue's to report running Windows 10 I really love it but here is my issue. Windows update has been stuck at 45% for the last 3 hour's and usually my updates go pretty quick. I've tried rebooting my system to see if the updates will finish installing but then it goes right back to 45% and stay's there.
View 5 Repliesso i installed windows 10 this morning and it went through the steps and got to a point in the install that says "Hi there, welcome back!" with a "next" button in the bottom right of the screen. When i click it nothing happens. If i click on the screen after about a minute it goes lighter blue and then reboots back to the very same screen.
View 24 RepliesDownloaded update last night. Installed this morning. "Getting windows ready. Don't turn off computer" has been on screen for 30 mintues
View 1 RepliesConfiguring update for windows 10 is stuck at 55%. This is the second time I am trying to update from w8.1, the first time it ended with a blue screen (power state failure).
I have a hp laptop
4th Gen i5
4gb ram
And more than enough storage available.
I just downloaded the update and when rebooted to install it. It got stuck at 40%. Is it the problem with Dell Venue Pro 8 in general or just me?
View 2 RepliesAfter restarting to start the upgrade to Windows 10 (from Windows 8.1), it's been stuck at 38% in the Configuring updates for windows 10 screen for about 3 hours now, and I'm not sure what to do. Is a reboot safe?
View 10 Repliesso im trying to update windows 10, and it keeps on getting stuck on install. i tried many things and left it for over an hour and nothing happens, the only way to stop it is to end it in task manager.
these are screenshots are what is happening
[URL]
the update fails to proceed beyond 58% and this has been going on for the last 1 week. The update seems to be Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124262). Is their a way to get past this, that is resume the download or just restart the whole thing from zero.
View 7 RepliesSo after having numerous issues with my ASUS VivoTab Smart upgrading to Windows 10 (Sound issues, display driver issues, losing my Recovery Drive, etc) I finally got everything fixed and my tablet was finally running as wonderfully as it did on Windows 8.1..... For about a week.
And then this latest build for W10 comes out. I downloaded it and then attempted to install it
The system restarts to do the update with the circular progress bar but then gets stuck at 40%. I have had this problem on three different PC's in the past and all I did was power them off, boot up again, and then it would finish off the update with no further issues.
But that didn't happen this time. I powered off my Tablet and then started it up again. Instead of carrying on, W10 decides to cancel the whole update and roll me back to am earlier version of W10.
I thought I would try again and this time wait longer. Maybe I was impatient. Went through the process again, rebooted, started the update install and then stuck at 40% yet again. I figured I would just plug my tablet in and leave it while I slept surly it would finish by the time I woke up. Nope it was still at 40%
Powered it down because I couldn't do anything else, but it decided to roll back again. What's worse is that it seemed to have rolled back to a version of W10 prior to when I got everything fixed mentioned above. So now not only am I stuck with a dud upgrade that keeps trying to install after a period of time, but I have to fix all my previous issues again. How to resolve this update freeze?
I have been using win 10 for quite a long time and am happy with it. This evening when I was opening up a word document it behaved strangely . I could shut it down but after that everything stopped working. Ctrl alt delete wont respond. I had to shut down the computer using the Power button. When I restarted the computer . It immediately went into update mode screen with the usual configuring windows and warning about not shutting down the computer .The screen is orange with circulating dots. ( first time I see an orange screen , its usually blue) .At the beginning there was a short indication of % like about 35% but now only circulating dots . Nothing else works . Its already been running for 1/2 hour or so. I will leave it overnight to see whether I can get to the log in screen.
What to do if I cant get to the log in screen ? Without log in screen I cant get to system restore? Is there a way to boot into recovery mode? I do have a Macrium image and a Macrium recovery flash drive. Will windows recognize this thumb drive on boot or do I have to boot into Bios first to change order of boot .
Alternatively can make and use win 10 recovery flash drive from another window 10 machine?
I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
View 4 Replies