Installation :: Update Keeps Failing At 84% - Any Way To Do A Fresh Install And Activate
Aug 4, 2015
I have Windows 7 Pro on a Dell 5420 laptop. I've tried the upgrade multiple times and it always gets to 84% and then the screen goes black/blank. It sits there for upwards of a couple hours. After that it reboots and says Restoring previous version of Windows and I end up back at Windows 7.
I don't know if there's any logs somewhere I could check to try to figure out what the problem is.
Do I have any options for upgrading this laptop if the update from 7 to 10 won't work? From what I've read I need to get the in place update to work in order to get a valid Win 10 key so I might be screwed...?
View 6 Replies
Similar Messages:
Apr 22, 2015
I'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
View 6 Replies
Dec 6, 2015
So basically, I've been dealing with this issue ever since I've upgraded to windows 10 months ago. I've done disk checks sata port checks almost everything under the sun
Months ago, anytime my computer was shut down for more than an hour or 2 I would encounter an interesting unique problem. After booting and loading the bios screen, the next screen would be black and would hang there and I would have to hard reset and try again. I would keep having to hard reset until it would boot into the Windows Boot Manager and from there I would hit the Reset button or go to the advanced settings, and hit continue to windows 10 and it would from there boot into windows successfully. AHA! now you must be thinking "Simple work around! Simply boot into the Windows Boot Manager every time you shut down your computer and easily but annoyingly bootleg boot into windows 10 everytime using the Boot Manager options" and I thought the same. Unfortunately unless I let my computer get to the boot manager by hard resets at that black screen I cant get windows 10 to boot.
I've reinstalled windows 10 again for the 2nd time on a new ssd in hopes that it was a drive issue but that does not seem to be the case, This is my second install of windows 10 on this ssd. This time I've installed windows HOME instead of Pro.
Do I've wasted a write cycle on this new Samsung 850 evo? I just received it in the mail and would rather not waste its lifespan on trouble shooting
View 3 Replies
Feb 10, 2016
Is there a way to install fresh windows 10 without .ISO, usb and dvd? I updated my windows 7 to windows 10, but now I want fresh install, is it possible to do it? Like just to start setup.exe and install it ... I've seen some yt video here: URL... so I was wondering is this even legit, will it work like that?
View 1 Replies
Jul 29, 2015
So i currently have 8.1 and i would like to reformat my Partition and do a clean install of windows 10. I have downloaded the windows 10 CD boot from here Windows 10 i have windows 8.1 home so i downloaded windows 10 home. And when i was doing the installation. it was asking me for my Product key. I typed in my Product key but it said " it did not recognize my Product key" So i quit the installation. I was wondering why it did not recognize my product key when we have the upgrade for free. Is there any other way to do a fresh install on windows 10? because i really would like to reformat my main partition and then do the installation of windows 10
View 4 Replies
Aug 22, 2015
I have successfully upgraded from win 7 to win 10 but i would like to do a fresh install as its been years since i have and would like to start from fresh.
I made the x64 DVD from the MS installation media creation tool.
I run the setup.exe from the disc and it starts downloading updates goes through the processes but after 1 hour or so a message comes up saying installation has failed.
I looked at you 'Clean install' guide and this relates to USB not DVD or is the process the same?
Should i be booting from the DVD rather then running the setup.exe
I did try but my pc restarts and just loads normally with out actually booting via DVD
View 9 Replies
Nov 24, 2015
I just downloaded Win10_English_x32.iso from Microsoft. I intend to install it on a new system with no prior OS, so I'll be purchasing a Windows 10 Home license from MS.
Will the following steps work:
Booting from a DVD created from the ISO. Install using product key purchased from Microsoft.
View 1 Replies
Feb 10, 2016
PC specs:
Gigabyte F2A88XM-D3H
AMD A8 APU
kingston v300 SSD 120gb
WD HDD 1tb
I recently built this system for a family member as a low budget media/gaming pc. This was originally setup with windows 10 on the 1tb main drive, so I know everything works. Now we decided to put an ssd in as a boot drive, and I cant seem to get it working.I wasn't able to clone the drive due to inconsistent sector sizes between the drives.
I've finally completed the install on the drive after many failed attempts but when I try to boot from it the message reads "reboot and select proper boot device or insert boot media in selected boot device".
View 9 Replies
Nov 6, 2015
Where can I get a list of files I need to copy before formatting my hard drive?
View 3 Replies
Jan 6, 2016
I just purchased a new Dell desktop which was pre-loaded with Windows 10. All I have done to this point is activate and update Windows. I want to install a Samsung 850 EVO SSD and then make the HDD a storage drive. Would it be better to migrate Windows to the SSD or perform a fresh install by using the media creation tool?
View 3 Replies
Dec 6, 2015
So basically, I've been dealing with this issue ever since I've upgraded to windows 10 months ago. I've done disk checks sata port checks almost everything under the sun and still have not found a solution to my problem.
Months ago, anytime my computer was shut down for more than an hour or 2 I would encounter an interesting unique problem. After booting and loading the bios screen, the next screen would be black and would hang there and I would have to hard reset and try again. I would keep having to hard reset until it would boot into the Windows Boot Manager and from there I would hit the Reset button or go to the advanced settings, and hit continue to windows 10 and it would from there boot into windows successfully.
Now you must be thinking "Simple work around! Simply boot into the Windows Boot Manager every time you shut down your computer and easily but annoyingly bootleg boot into windows 10 everytime using the Boot Manager options" and I thought the same. Unfortunately unless I let my computer get to the boot manager by hard resets at that black screen I cant get windows 10 to boot.
I've reinstalled windows 10 again for the 2nd time on a new ssd in hopes that it was a drive issue but that does not seem to be the case, This is my second install of windows 10 on this ssd. This time I've installed windows HOME instead of Pro.
I do NOT boot into a black screen with a cursor
There is now something I'm going to call "The Event" After a fresh install my windows 10 will freeze however i can move my mouse but no keyboard commands work and I from this point have to force reset my computer, AFTER i FORCE RESET when my computer is shut down for a couple of hours i encounter the boot problem. so this "EVENT" has something to do with whats causing this issue.
The Event was different when windows 10 was installed on my 1TB HDD, everything would lock up rather then being able to use my mouse and it would force reset on its own.
View 1 Replies
Aug 18, 2015
I did an in place upgrade of Windows 7 using a USB key made with the tool Microsoft put out. I chose not to download updates during the install, so after the initial boot, Windows started downloading updates. I reinstalled the latest nVidia drivers/Geforce Experience as well. During the next boot cycle, at some point explorer crashed and the screen flashed black, at which point that process repeats forever. I let it go over an hour just to see what would happen. URL...
The suggestion on that site is to disable 2 Windows Services: Problem Reports and Solution Control Panel Support and Windows Error Report Service. This didn't work for me, though it appears to have worked for many others.The culprit for me was Apple's iCloud service. As the taskbar was being populated, this task would load and throw an error message about logging in, at which point the crash loop began. Uninstalling this program solved the issue for me.
View 1 Replies
Dec 10, 2015
I just had to re-install W10 using the latest build offered by the Microsoft Setup Tool because W10 on one machine became corrupted somewhere along the multiple update path! No problems, except it seems that a few of the default settings are a little different than they were in previous downloads. Most are for the better. But...I can't seem to figure out how to turn off the display of all the disk drives in the Navigation Pane of File Explorer. I have five other systems that have migrated successfully along the update path and they don't look like the screen shot attached. What or where is the setting to turn off the display of the disk drives when the "This PC" is collapsed.
View 9 Replies
Aug 18, 2015
I pretty much gave up trying to install this thing after 3 days of trying. Keeps trying to install and fails.
View 2 Replies
Nov 29, 2015
So I've had this computer for about a year now. I made it from used parts but in very good condition. Recently, I just turned it off, and when I turned it back on, an error popped up, something like winboot.exe, it doesn't really matter.
I tried to do a clean install of win 10 and win 7, and both times my SSD didn't have a partition.
I didn't delete it beforehand so it was weird.. And when I try to create a new one, an error pops up and I can't create it.. I did a clean install on a new HDD and the windows works, I just miss the boot speed..
View 1 Replies
Jan 24, 2016
New build. From a fresh install of windows 10 i try to install the drver for my IGPU Intel HD 530. each time i do that i get a BSOD with this message:
VIDEO_TDR_FAILURE igdkmd64.sys
Or sometimes it's
SYSTEM_THREAD_EXEPTION_NOT_HANDELED igdkmd64.sys
I've tried drivers from motherboard manufacturer CD, website and intel and some autodetect driver software. I always get the same behavior:
The screen start blinking several time ( black screen) before showing the BSOD then reboot and repeat it self. Even the driver downloaded by windows update have the same impact.
I've managed to install it in safe mode but when i restart in normal mode i get the same behavior.
I've tried 2 different monitors, VGA and HDMI , tried with UEFI on/off => same result.
I've tweaked once the tdr delay to 8 second, but didn't work.
CPU: Intel I7-6700KMotherboard: ASUS Z170 PRO GAMING
RAM: HyperX FURY HX421C14FBK2/16 - 16Go Kit (2x 8Go) 2133MHz DDR4 Non-ECC CL14 DIMM
SSD: Samsung EVO 850 MZ-75E250B/EU 250 GB
with 80 PLUS 550W power supply.
OS: WINDOWS 10 FRENCH HOME X20-25432
View 6 Replies
Aug 2, 2015
Trying to update to windows 10. Failed over a dozen times. The update is free for me.
View 2 Replies
Nov 14, 2015
My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
View 11 Replies
Aug 1, 2015
I have a new 250gb SSD I want to do a fresh install on Windows 10 on. However I've already upgraded to Windows 10. I've downloaded a fresh Windows 10 installation onto a USB for the new install using the Media Creation Tool.
Is all I need to do just boot from the USB and install onto the new disk, or will it ask me for a product key etc? cause I stupidly have Windows 10 N currently, but the version on the USB boot is just plain 10.
View 1 Replies
Jan 5, 2016
So I've had my PC for about over a year now and I think it's time to do a fresh install. After doing the fresh install what is the proper steps for the first boot? What drivers should I be getting again, etc.
View 1 Replies
Jan 11, 2016
I have upgraded my laptop to Windows 10 then did a clean install..... Need to change the laptop HDD will I be able to do a clean install and achieve activation or is there a procedure to follow...
View 5 Replies
Jan 24, 2016
So I recently got a new SSD and installed Windows 10 on it, I'm wondering how to make it so my HDD doesn't take over again and become the boot part and leave my SSD in the dust.
The first time I installed Windows 10 on my SSD and then hooked up my HDD to the system even with the boot order where I put the SSD first somehow the HDD ignored those settings and started up, so my SSD was left doing nothing.
So I reinstalled Windows 10 on my SSD with my HDD unattached for now, I was wondering what I have to do to make sure the SSD is the boot and the HDD is just a storage device.
Computer Information
OS: Windows 10
CPU: Intel i5 2500K
RAM: Corsair 8 GB (2 sticks)
SSD: Samsung 850 EVO 500 GB
HDD: Seagate Barracuda 1TB
View 1 Replies
Jul 25, 2015
I've got an SSD on the way, and I want to do a full fresh OS install on it using my Windows 7 disc, then once installed I will upgrade to Windows 10.
View 1 Replies
Aug 27, 2015
I recently upgraded to windows 10 on my laptop, But now I am buying a SSD to swap out and I wanna do a fresh install of 10 but is there a way to get my current windows 10 key off of it or?
View 1 Replies
Aug 8, 2015
I would like to upgrade my Windows 7 to Windows 10. I have so many files and games installed on windows 7. I am afraid of compatibility issue and might lose the save file.
Does any of here a Windows 7 Ultimate users and upgrade their OS to Windows 10? What happen does it affect any program and lost game save file? I want to know cause there's no turning back after I update my OS.
View 1 Replies
Dec 31, 2015
I'll soon be upgrading my PC to Windows 10 pro and while doing so I also purchased a dedicated SSD for the OS as well as an SSD for games. I plan to back up the old info from my HDD to an external and just wipe the HDD to use as extra storage. Obviously this means that all the drivers I installed when I first build the machine will be gone and I'm a little intimidated by the process of searching out what drivers I'll need for this new install.
I can't be 100% sure that I'll locate my mobo's driver install disk, however I have located the mobo on the manufacturers website where I have access to it's Windows 10 dedicated drivers. Everything is a separate download there, however, compared to the disk install which was a simple click and go so I'm not sure exactly what I need, what Windows will install automatically, etc. Some of the drivers say they need to be installed via a usb boot drive which is find strange. [URL] ....
View 1 Replies
