Installation :: Upgrade Failed Error 0xC1900101 Safe OS During Boot
Jul 30, 2015I received the error shown as the installation started, the first reboot after downloading the files and updates.
View 3 Replies
Similar Messages:
Installation Failed In Safe OS Phase With Error During Boot 0xC1900101-0x200
Aug 5, 2015Still trying to update to windows 10. Have updated windows 7 w/sp1 and have checked that my computer is ready for update 10. Everything goes great until final shut-down and restart.Then I get black screen with Blue Flag and locks up, will not go any further. After 5 hours of waiting tried turning off and it restarted and gave this error message: Instalation failed in the safe OS phase with error during Boot. 0xC1900101-0x20017
View 3 RepliesErrors 0xC1900101-0x20017 - Installation Failed In Safe OS Phase With Error During Boot Operation
Oct 20, 2015The upgrade process seems to go on Ok, but, near the end I see this message:
"The drive where Windows is installed is locked. Unlock the drive and try again.
"Errors 0xC1900101-0x20017
"The installation failed in the SAFE_OS phase with an error during BOOT operation.
Black Screen 0xC1900101-0x200C - Installation Failed In SAFE-OS Phase
Jul 31, 2015I download windows 10 pro 64bit ISO file and extracted to pen drive pc restart and loaded windows 10 setup format Disk C give the install windows after its goes 100% all done pc restarted after screen black nothing happening.
0xC1900101-0x200C
The installation failed in the SAFE-OS phase with an error during APPLY-IMAGE operation
My Pc Information
1Gb Vga Card
4Gb Ram
I3 Processor
500Gb Hard
Installation :: Upgrade Fails At 25% With Error 0XC1900101 - 0X20004
Aug 6, 2015Cannot upgrade to windows 10 from windows 7, Fails at 25% with error 0XC1900101 - 0X20004. How can I get around this error and what is causing error.
View 3 Replies0xC1900101-0x20017 Error During Boot
Aug 31, 2015Windows 10 goes through the entire download/installation process, restarts, blue screens with a "system thread exception not handled (iastora.sys). It then restarts and shows this error for windows 10. Am I screwed? It goes back to the desktop and works somewhat (other than windows 8.1 bugs). I don't have any files on this computer that I need to keep. I just want it fixed!
View 1 RepliesBSOD :: Trying To Upgrade But Keep Getting Error 0xC1900101 - 0x40017
Aug 18, 2015I'm trying to upgrade a Lenovo U410 to Windows 10, but I keep receiving this error:
0xC1900101 - 0x40017.
What this may be?
Installation :: Upgrade Failed (error 80240020)
Aug 4, 2015I got the little 'Get Windows 10' icon and reserved my copy, all fine. But it still doesn't actually say it can install, not sure why. But my laptop has now tried to install W10 5 times, without telling me it was going to or asking my permission. And all five times it has failed with error code 80240020. This is not my area of expertise and I don't know why it keeps doing this. I'm not even sure I want to install it; I only reserved it to see what everyone else thought and I figured I'd have some kind of say in the matter. Basically, is it supposed to do this? And what can I do to fix it, either by stopping it trying or installing it properly?
View 2 RepliesInstallation :: Upgrade Failed At 83% With Blue Error Screen
Aug 7, 2015I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
Installation :: Upgrade From Win7 Pro Failed Error Code 0xe06d7363
Dec 10, 2015Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
Installation :: Upgrade Failure - 0xC1900101 / 0x30018
Jul 29, 2015I've been having a problem with upgrading to Windows 10. I've tried using the tool both by running it on my PC and putting it on a USB. It gets through the first part of copying files and does the first reboot, then it starts back to the screen and the Installing Features and Drivers sits at 0% for a few seconds then resets and restores my old version with this error:
0xC1900101 - 0x30018 - The installation failed in the FIRST_BOOT phase with the error during SYSPREP operation.
When I originally looked this error up I read that it might be an encryption error so I decrypted both of my drives, ran the install again.. Same error. So now I am at a complete loss as to what to do so I can get myself upgraded.
System:
Windows 8.1 Pro x64
Mobo: ASUS ROG Maximus VII Hero
PCU: Intel i7 4790k 4.00 GHz
GPU: ASUS ROG MARS760x2 (2 GTX 760 chips on one card)
RAM: 16GB DDR3
Asus P8z77-v Lk / Installation Fails With Error 0xC1900101-0x30017
Jan 21, 2016how to solve this error, I have an asus p8z77-v lk mother board and an intel i7 32 bit processor. Windows10 seems to complete the installation then exits with the error "Does not support the processor configuration. error # '0xc1900101-0x30017' It then reverts back to win7.
View 1 RepliesInstallation :: Upgrade Fails - Second Boot Error On Migrate Data
Aug 8, 2015I have tried and tried to upgrade from WIN 8.1 to 10 with no success.
The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."
I have removed all 3rd party antivirus, and a bunch of other fixes. A
After Failed Upgrade PC Will Only Boot XP
Aug 22, 2015After unsuccessfully trying to installing windows 10,it was stuck on 46% for 17 hours.
I tried to reinstall my windows 7 Pro Disc,it wouldn’t boot and was not recognize the disc,l tried to load and boot an Linux Ubuntu & Mint via usb & disc,didn't work.
I tried an XP pro disc that l downloaded and burnt onto a CD,that loaded XP pro on my PC. Which seems to work apart from not been able to access the internet.
I'm thinking maybe l should wipe the hard-drive and try to reinstall my windows 7.
Overclock Settings Have Failed Error On First Boot
Aug 2, 2015I recently upgrade from Windows 7 to Windows 10 ( Build 10240). I had my overclock settings at 4.4 GHz/1.172 CPU Vin (specs listed at the bottom). My computer had no issues prior to switching to Windows 10. However, my computer always crashes and gives me the "overclock settings have failed" error within the first 10 minutes. This seems to only happen during the first boot session of my computer.
After restarting, the computer seems to run fine with no problems. I've tried restarting with default CPU settings and my usual OC settings. My computer runs for several hours with no issues. The issue comes back after I've turned the computer off for a long period of time (~3-5 hours).
I think its a Windows 10 issue, but I'm not sure.
Specs
OS: Windows 10 Pro 64-bit (Build 10240)
Mobo: MSI Z87-G41 PC Mate
CPU: i5-4690k
RAM: Kingston HyperX 8 GB
Installation :: Dual Boot - Safe To Delete 1 OS?
Sep 12, 2015Currently, I have dual boot Win7 and Win10. And the only reason I have Win7 is because the drivers for a printer were not updated to Win10. Now recently HP did just that, and I no longer need Win7.
The way I have it set up is that I have Win7 on one partition, Win10 on another (100GB each) and the rest is Storage. Is it safe to simply remove and format the partition that has Win7 on it ?
Installation :: How To Install Upgrade From Safe Mode
Aug 6, 2015Windows 10 ISO Upgrade from 7 Pro Failure: Blank Screen
Is there any way to install Windows 10 Upgrade from Safe Mode?
Keep Getting Installation Failed In Second Boot
Aug 25, 2015I have been trying to install the Windows 10 upgrade to no avail .
I am running windows 7 home premium x-64 on a Gateway NV78 laptop.
Things I have already tried range from deleting programs and device drivers to reinstalling the updater. Have run a clean boot and ran from the updater, the build. a startup disk, and from a usb flash drive. I have deleted my printer drivers, virus software, and cleaners.
Installation :: Upgrade Failed On Laptop
Dec 24, 2015I convinced my friend to upgrade to windows 10 on his laptop and it failed leaving it screwed.
The laptop is based on a Clevo W350ET chassis.
When you turn it on it goes to a screen saying 'Recovery Your PC/Device needs to be repaired, A required device isn't connected or can't be accessed, Error code 0xc000000f'.
Any options like revert to a previous built, system restore or whatever do not work.
Any chance of saving the current install or will I have to reinstall everything? My friend has old programs he is concerned he cannot get anymore.
Installation :: Failed Factory Reset - Won't Boot Up
Feb 10, 2016Recently, I decided to do a factory reset, to cleanly wipe my drive, with the exception of Windows. When the reset was about 30% through, the reset failed. Now, when I try and use my laptop, it only gets to the ASUS logo, then goes to a black screen with a flashing underscore symbol on the top left corner. I've tried doing F9, SHIFT+F9, and everything else in between. My laptop is an ASUS G74SX, and I don't have a recovery partition for the laptop. I also cannot get any external programs for the laptop, such as ISOs, etc.
View 1 RepliesInstallation :: Reset Failed - Can't Boot Computer
Feb 10, 2016So my computer has been kinda laggy and running slowly so I figured I would do a clean reset of Windows 10. It noted that it would take hours, which was fine. However about an hour into it, it said there was an error resetting. It then restarted the computer however I can't get passed the "ASUS" start up logo. It goes black and then loops. I hit F9 but none of the options work for me - automatic repair won't work because it says my computer doesn't have an administrator and when I try to reset again from there, it tells me that "a required drive partition is missing." I don't have the greatest knowledge on computers, so I really don't even know what that means.
I've read that I might have to reboot from a USB - how would I go upon doing that? Is there something I can download on the Microsoft website? I don't have a key because the computer came pre-loaded with Windows 8 and I upgraded to Windows 10 for free last year. Will I still be able to boot from a USB?
Installation :: Upgrade Failed Reverting Back To 7
Jan 31, 2016My father hit yes to upgrad his HP Probook 6407b from Windows 7 to Win 10. He did not realize what he was saying yes to.He brought it to me before it finsihed. I got into win 10, but then had issues with HP security software at boot. It would hang at boot, say something about a finger print reader, and then allow me to log in. So I decided to revert back to win 7. that failed. Goes to try a startup repair and it does not work. It looks like win 7 trying to do it and not 10.
Is there any way to recover either win 7 or 10?I tried a win 10 usb drive, but it says the upgrade was previously started in windows, turn off machine and restart, but that fails.
Installation :: Cannot Install - Getting A Failed Message Error 8007000D
Oct 2, 2015Have not been successful in updating from win 7 to win 10. I just get a message saying installation failed error 8007000D
View 1 RepliesInstallation :: Dell Venue 8 Pro - Upgrade Failed More Than 25 Times
Sep 24, 2015I have tried upgrading my Dell venue 8 Pro many times from GWX, installation media and direct download in normal and also after reset of tablet with secure boot and also removing secure boot, removing fast boot and with fast boot using all permutations and combinations. Still I am unsuccessful. I am not finding any way to get support from Dell also. It goes to upgrade 91% always and then says going to reboot. But it reboots to windows 8.1.
View 9 RepliesInstallation :: Upgrade Will Not Fully Download - 6 Failed Attempts
Aug 3, 2015I have two computers my laptop has updated to windows 10 with the automatic upgrade with no problems.
But my PC will not start the upgrade I was told to look in the temp folder $Windows.~BT.
The size of this folder was 5.88 GB. And had been like that for a couple of days.
After reading on [URL] .... It said that the upgrade might be corrupt I followed the advice and went to (Windows/ Software Distribution/ Download) and deleted everything in that folder. Then I ran the command prompt as an administrator. Type in "wuauclt.exe /updatenow".en as advised on the website.
Almost straight away the windows upgrade started again but it has gone back to the 5.88 Gb and stopped again
Looking at windows update and view update history I see there are 6 failed attempts to upgrade to windows 10 all with Error details code 80240020....
Error Code 0x8007000E-0x2000C When Updating Using ISO - Installation Failed
Nov 15, 2015A friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." He sent me a screenshot of the error but for reasons I don't know, Tapa Talk isn't allowing me to send the image. The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."
View 1 Replies
