Installation :: Upgrade Failed (error 80240020)
Aug 4, 2015
I got the little 'Get Windows 10' icon and reserved my copy, all fine. But it still doesn't actually say it can install, not sure why. But my laptop has now tried to install W10 5 times, without telling me it was going to or asking my permission. And all five times it has failed with error code 80240020. This is not my area of expertise and I don't know why it keeps doing this. I'm not even sure I want to install it; I only reserved it to see what everyone else thought and I figured I'd have some kind of say in the matter. Basically, is it supposed to do this? And what can I do to fix it, either by stopping it trying or installing it properly?
View 2 Replies
Similar Messages:
Aug 6, 2015
Windows 10 download has been trying to update and failed at least 25 times, same error 80240020.
I have tried deleting files in the C;/windows/softwaredistribution/download and running wuauclt.exe/updatenow but no luck.
Download got to around 75% last night and failed.
View 1 Replies
Aug 1, 2015
I triggered the manual update through the command line. Win 10 downloaded and failed at 99%. I got this error Code 80240020. How to fix it?
View 1 Replies
Jul 29, 2015
No luck in installing Win 10 Home to their HP Stream 8? When I forced an upgrade I got Error 80240020 when installing. Using iso was a no go also. Maybe because it has a compressed OS? I have enough free space on drive c.
View 1 Replies
Aug 2, 2015
I have reserved my copy of Windows 10 and have attempted five times to upgrade but it just keeps failing.
The error code is: 80240020.
I have made sure that my laptop meets the specification, which is does, and also the disk space on my harddrive too.
View 5 Replies
Aug 7, 2015
I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
View 3 Replies
Dec 10, 2015
Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
View 9 Replies
Jul 30, 2015
I received the error shown as the installation started, the first reboot after downloading the files and updates.
View 3 Replies
Jul 31, 2015
Download of the installer fails 3 times with error 80240020 on Windows Update
System on Pc is Windows 7 Starter with update SP1 .Enough Ram 2G
View 1 Replies
Oct 19, 2015
I cant upgrade to windows 10, i tried using media creation tool also but didn't work.
View 9 Replies
Dec 24, 2015
I convinced my friend to upgrade to windows 10 on his laptop and it failed leaving it screwed.
The laptop is based on a Clevo W350ET chassis.
When you turn it on it goes to a screen saying 'Recovery Your PC/Device needs to be repaired, A required device isn't connected or can't be accessed, Error code 0xc000000f'.
Any options like revert to a previous built, system restore or whatever do not work.
Any chance of saving the current install or will I have to reinstall everything? My friend has old programs he is concerned he cannot get anymore.
View 3 Replies
Jan 31, 2016
My father hit yes to upgrad his HP Probook 6407b from Windows 7 to Win 10. He did not realize what he was saying yes to.He brought it to me before it finsihed. I got into win 10, but then had issues with HP security software at boot. It would hang at boot, say something about a finger print reader, and then allow me to log in. So I decided to revert back to win 7. that failed. Goes to try a startup repair and it does not work. It looks like win 7 trying to do it and not 10.
Is there any way to recover either win 7 or 10?I tried a win 10 usb drive, but it says the upgrade was previously started in windows, turn off machine and restart, but that fails.
View 9 Replies
Oct 2, 2015
Have not been successful in updating from win 7 to win 10. I just get a message saying installation failed error 8007000D
View 1 Replies
Sep 24, 2015
I have tried upgrading my Dell venue 8 Pro many times from GWX, installation media and direct download in normal and also after reset of tablet with secure boot and also removing secure boot, removing fast boot and with fast boot using all permutations and combinations. Still I am unsuccessful. I am not finding any way to get support from Dell also. It goes to upgrade 91% always and then says going to reboot. But it reboots to windows 8.1.
View 9 Replies
Aug 3, 2015
I have two computers my laptop has updated to windows 10 with the automatic upgrade with no problems.
But my PC will not start the upgrade I was told to look in the temp folder $Windows.~BT.
The size of this folder was 5.88 GB. And had been like that for a couple of days.
After reading on [URL] .... It said that the upgrade might be corrupt I followed the advice and went to (Windows/ Software Distribution/ Download) and deleted everything in that folder. Then I ran the command prompt as an administrator. Type in "wuauclt.exe /updatenow".en as advised on the website.
Almost straight away the windows upgrade started again but it has gone back to the 5.88 Gb and stopped again
Looking at windows update and view update history I see there are 6 failed attempts to upgrade to windows 10 all with Error details code 80240020....
View 7 Replies
Nov 15, 2015
A friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." He sent me a screenshot of the error but for reasons I don't know, Tapa Talk isn't allowing me to send the image. The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."
View 1 Replies
Aug 5, 2015
Still trying to update to windows 10. Have updated windows 7 w/sp1 and have checked that my computer is ready for update 10. Everything goes great until final shut-down and restart.Then I get black screen with Blue Flag and locks up, will not go any further. After 5 hours of waiting tried turning off and it restarted and gave this error message: Instalation failed in the safe OS phase with error during Boot. 0xC1900101-0x20017
View 3 Replies
Sep 28, 2015
I have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
View 2 Replies
Oct 20, 2015
The upgrade process seems to go on Ok, but, near the end I see this message:
"The drive where Windows is installed is locked. Unlock the drive and try again.
"Errors 0xC1900101-0x20017
"The installation failed in the SAFE_OS phase with an error during BOOT operation.
View 3 Replies
Jul 30, 2015
I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
View 2 Replies
Jul 29, 2015
I am now getting a new error. The error i am now getting is error C1420127 windows 10 now installs almost but towards the end it stops and says error and then when i go to look at it that is what the error is.
View 9 Replies
Jul 30, 2015
Using the media creation tool (both usb and ISO) I get an error. Something like "installation has encountered an error during first_boot with sysprep." In not at my toshiba laptop at the moment so the wording may be a little off. Upgrading from my 8.1 current os. I just read about removing my eset antivirus before upgrading so I will remove that and my malwarebytes program as well and try again.
View 2 Replies
Nov 7, 2015
I tried to upgrade to Windows 10 from pro 7. When going online I get this message....
explorer. exe - Application Error
The instruction at 0x60B52556 referenced memory at 0x60B52556. The memory could not be written. Click ok to terminate the program.
If I close with the "x" I can continue. But when I close Firefox I get a black screen and have to restart. Anytime I use a program it does this. What to do.
View 8 Replies
Aug 6, 2015
Cannot upgrade to windows 10 from windows 7, Fails at 25% with error 0XC1900101 - 0X20004. How can I get around this error and what is causing error.
View 3 Replies
Aug 8, 2015
I have tried and tried to upgrade from WIN 8.1 to 10 with no success.
The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."
I have removed all 3rd party antivirus, and a bunch of other fixes. A
View 1 Replies
Aug 9, 2015
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 Replies
