Installation :: Upgrade From Win7 Pro Failed Error Code 0xe06d7363
Dec 10, 2015
Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
A friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." He sent me a screenshot of the error but for reasons I don't know, Tapa Talk isn't allowing me to send the image. The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."
I have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
I tried to upgrade to Windows 10 from pro 7. When going online I get this message....
explorer. exe - Application Error The instruction at 0x60B52556 referenced memory at 0x60B52556. The memory could not be written. Click ok to terminate the program.
If I close with the "x" I can continue. But when I close Firefox I get a black screen and have to restart. Anytime I use a program it does this. What to do.
I got the little 'Get Windows 10' icon and reserved my copy, all fine. But it still doesn't actually say it can install, not sure why. But my laptop has now tried to install W10 5 times, without telling me it was going to or asking my permission. And all five times it has failed with error code 80240020. This is not my area of expertise and I don't know why it keeps doing this. I'm not even sure I want to install it; I only reserved it to see what everyone else thought and I figured I'd have some kind of say in the matter. Basically, is it supposed to do this? And what can I do to fix it, either by stopping it trying or installing it properly?
I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
Trying to up grade dell laptop to Windows 10. Getting message that update failed with error code(s): 8007001F first try and C1900107 second try. What do I do?
I'm trying to rollback to Win7 after Win10 update. I've got some hardware that I want to use that's not compatible.
I've tried going to recovery and 'Go back to Win7' but it's telling me I need to delete the users I've created. The problem is that I removed the original user from Win7 so it wants me to delete the two users I created with Win10. Is there another way to uninstall? I know I won't be able to delete all users and I don't know how I can recreate the original account.
I do have a backup of my windows 7 install before I upgraded. Is my license still going to work or will it be inactive due to the upgrade?
Using an Asus CM8730 desktop with Win7. Purchased a Samsung Evo 850 SSD and used Samsung Migration software to move Win7 to the SSD from the HD that came from the computer. All went well, the computer boots very fast from the SSD. After about a month of use I decided to upgrade to Win10 but each time I've tried I got the same message: "Windows 10 couldn't be installed. We couldn't update the system reserved partition."
After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
I upgraded from windows 7 ultimate to windows 10. It seemed to install okay and asked me to log on and select setup preferences, which I did. I left it alone to finish setup and it went to sleep. Now I only get a black screen with an active cursor. I've tried multiple hard restarts, entering logon blindly as suggested in other posts and using windows key-p to switch monitors all to no affect. Ctrl-alt-del has no effect. I cannot bring up any screen and so cannot start in safe mode or download video card drivers. I do not have Windows 10 on media.
I have a dual boot system in the following configuration:
HDD-0 = Win7 OS, HDD-1 = Win7 OS, WinXP OS. I have successfully booted into each of these operating systems - and the Win7 OS on HDD-1 is an exact clone of the primary OS on HDD-0.
I just upgraded the Win7 OS on HDD-0 to Windows 10 using the "Get Windows 10" process. I now get the new blue Boot Manger screen with all three OS's listed and I can successfully boot into Windows 10 and Windows XP. But I cannot boot into the Win7 OS on HDD-1 (which I could before the Windows 10 upgrade). How the upgrade even knew about the other copy of Windows 7, since it was not active and lives on another HDD is beyond me.
One strange thing - if I do a cold startup (power on) I get the new Boot Manger screen. But if I do a Restart from Windows 10, I get the old, black & white boot manger screen - and it does list all three OS's correctly, too.
The error message I get when trying to open (boot) the Windows 7 OS is: "LogonUI.exc - Entry point not found. RtlReleasePath could not be located in the ntdll.dll" And, like others, I now get the black screen with "Windows 7, Build 7601 This copy of Windows is not genuine (but it was yesterday before the Windows 10 upgrade on the other HDD).
And like others, I can start the Crtl+Alt+Del to get the screen with users, Task Manger, etc. And, I can run all my applications by manually starting them in a New Task and browsing to the exe file - like Firefox.exe or Word.exe So, it looks like Windows 7 started and may be running. I just can't get into it.
I think both issues, the LogOn and the "Not Genuine" are both related to the Entry Point no located in the ntdll.dll.
At this point I really don't want to reload Windows 7 since it appears to be running and all the apps can be run manually.
All this happened after the upgrade of the other Win7 on HDD-0.
I received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
Upgrade to Windows 10 Pro, version 1511, 10586. has been installed but the Restart Now button did not work. It says
We're having trouble restarting to finish the install. Try again in a little while. If you keep seeing this, try searching the web or contacting support. This error code : (0x80070032)
I manually restart the PC but the update did not applied.
I've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1 Intel Core i7-2600 CPU 16gb Ram AMD Radeon R9 380 Series Single monitor
I'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
I convinced my friend to upgrade to windows 10 on his laptop and it failed leaving it screwed.
The laptop is based on a Clevo W350ET chassis.
When you turn it on it goes to a screen saying 'Recovery Your PC/Device needs to be repaired, A required device isn't connected or can't be accessed, Error code 0xc000000f'.
Any options like revert to a previous built, system restore or whatever do not work.
Any chance of saving the current install or will I have to reinstall everything? My friend has old programs he is concerned he cannot get anymore.
I have never had a problem installing updates to Win 8.1 and all important updates are fully installed. Every time I try to update to Win10 it says "downloading Windows 10 - checking requirements" and then I get the above error message.
Basically I got this error message while upgrading to Win 10 from Windows 8.1 using the media creation tool.
What happened was, I did this first and i got to windows 10 no problem. Everything was fine until my internet died on the PC. Troubleshooting said there was a problem between the router and the connection. Long story short I could not get the internet up and running on my desktop only, everything else was fine and my other devices had no problem connecting to the Internet. The Internet worked about 4 hours into using Windows 10 then died on the PC only.
So I went back to Win 8.1. Everything seemed to go ok, everything worked. I tried to update to Windows 10 again Abd got this during the install...
