I've successfully updated to Windows 10 on my two Surfaces, but there is some kind of issue on my desktop PC. The upgrade process from Windows 8 fails at about 71% total (Installing features and drivers at 91%), and the error I get is:
C1900101-40017 Windows Update ran into a problem.
When I click on "Get help with this error" I'm directed to a page with some general troubleshooting with Windows Update. I've run Windows update repair tool and it fixed some issues, but the installation failed again.
I have now tried freeing up more disk space which I admit was a bit tight and I'm preparing to run the update again. Still, I'd prefer if there was a more detailed error message or a log file where I could see what exactly went wrong, but there are no indications where I might find one (either in the error message, the troubleshooter, or Google). As it is, I'm shooting blind here and this will now be my fifth upgrade attempt.
I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
Upgrade of Win7 HP laptop -- not usual failure code. Upgrade done through Windows Update (copy was reserved). Gets to 24%, restarts, bring up Recovery screen, fails with 0xc0000f -- a required device isn't connected.
Only one physical drive in the laptop -- works fine under Win7.
Have seen threads about problems with System Reserved being too small for Win10 (200MB for Win7 vs. 450MB for Win8). Tried shrinking C: and resizing System Reserved.
Repeats above problems -- plus, leaves laptop in weird mode with Win10 partially installed, a new Recovery partition, and nothing working (meaning, Win7 won't boot anymore).
Am now trying option of installing from DVD, after merging boot stuff into C: partition and removing System Reserved -- figuring that if Win10 requires a System Reserved partition, it knows how to create one the right size.
The first time, it hung at 26% total, 89% copying files. Then it bricked my system completely so I made a clean install of Windows 8.1. There was nothing else installed than Windows & Updates.
Tried to update it with a stick made by the Media Creation Tool --> Stuck at 23%, 77% copying files.
I tried everything: Disabled Network Adapter, pulled all Cables (only mouse left) out, I also detached my second HDD.
I am trying to install Win10 on my SSD (Samsung 830 Pro, 130GB). I am running a Z77 Chipset.
I'd love to install completely new with the Image but that doesn't work because of the activation later on..
I'm stuck with a fresh Windows 8.1 install now, that's not really what I wanted. I'd love to update to 10 since I had it as a Insider too.
Have followed instructions & downloaded upgrade only to find every time it gets to 32% it fails & will not go any further, have done this four times outcome always the same, I have 74gb of hard drive free so there should be enough to accommodate the upgrade.
I have made 3 attempts at upgrading my Toshiba Satellite notebook from Windows 7 home premium to windows 10. Have tried both the upgrade sent via the Microsoft message and using the media creation tool. All 3 times it stopped in configuring devices at 38%, 47% overall progress. The setuperrlog.txt is:
I received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
I have attempted to download windows 10 around 4/5 times, the download completes and states that my computer needs to restart upon which it claims it is configuring the windows 10 upgrade. I would assume from this point it would restart into the windows 10 configuration however each time I have tried it it restarts back into windows 8 as if nothing had happened.
My laptop then opens up windows update and says I am able to download windows 10. This is really frustrating as I can't even seem to get into the windows 10 setup.
As you can see I am attempting to download again but there is no trace at all of it attempting to install windows other than this failed update that you can see here.
When upgrading to W10 it failes. W10 can't get the source disk. I think it's because i have already moved my W7 from the HDD to a ssd disk using Samsung migration program delivered with the ssd disk.
When I downloaded Windows 8 Pro a few years ago my PC only had 1GB of RAM, so it installed the 32 Bit version. I have since added another GB of RAM. When Windows 10 is released, will I be able to download and install the 64 Bit version, or am I stuck with the 32 Bit version on this PC?
I have done the update once, waited around 2/3 hours. i then reset my PC. i then did the update again, waited at least 5 hours. still stuck at 32% if there is a fix for this, i will do anything. i have a brother who did this update. My laptop is a pavilion 15 8gb ram radeon hd 7600g win 8.1
i have windows 8.1 and already reserved windows 10 , but windows update doesn't work always stuck at checking for updates i tried all fixes on the internet and it didn't work . so how do i get windows 10?
I've run the free Windows 10 upgrade twice on my Windows 8.1 laptop. Both times, Windows 10 would download. As my system restarted the install would take place and system finishes restarting. However, upon hitting the splash screen, I was back to Windows 8.1. Not sure why the install is failing. Each time, I receive a failure in the Windows Update popup. Did not have this problem on my desktop going from Windows 7 to 10.
I just upgraded my Windows 7 installation to Windows 10 using the Windows free upgrade. The upgrade completed successfully and I am able to boot into Windows 10.
I am not able to open any applications pinned to the taskbar. Even the windows menu is not launching! Hence I am stuck with only limited set of applications which have shortcuts on the desktop.
I am using Windows 7 SP1 [ Genuine ]. My upgrade to windows 10 is ready via windows update but i don't want to install it. how to remove this option so that normal system updates can be install.
I have just accepted a free upgrade offer from Windows 7 to 10. I am now offered a login page with a demand for a password which I do not have and which I am not allowed change without a USB flash drive which I don't have. I now have no toolbar with which to access other sites or programmes and am having to write this post on a different laptop.
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
I'm currently running Windows 7 Pro on a Lenovo ThinkPad.
I have the Get Windows 10 icon showing. When I click it, it takes me to the Upgrade Now button. So far so good.
When I click the Upgrade Now button, I get the starting to download screen with the circle dots. After a few seconds, it then takes me to the Windows 7 'Windows Update' page in the control panel, where it says that 'windows is up to date'. And that's it.
How to get Windows 10 to upgrade? I've done other laptops without issue.
I have just built a new gaming PC and everything works fine, windows installed correctly, all drives are recognized programs are installed etc.
But I have a small problem... When I shut down, power off and leave my PC for a while, upon startup, windows wont boot. It goes onto the motherboard screen and then says ''starting automatic repair''. It gives me a list of options, and the only option which gets me back to windows is to restore to a windows recovery backup which I created. Every time I shut down, I have to restore and then add a few programs that got removed which is very annoying.
The PC is stable and all my programs which are installed are working fine, but for some reason, it enters this recovery mode when I start up from a shutdown.
I am running windows 10 64bit, my motherboard is an Asus VII Hero and I have installed all the drivers which are needed along with a few programs. I am thinking I may need to do a re-installation of windows, would that fix the problem?
Since updating Windows 7 to Windows 10, if I try to" scan to computer" I get a message on the printer touch screen " No Connection No computer is connected" How can this be corrected?
